Commit 4876886f authored by Gregory Herrero's avatar Gregory Herrero Committed by Felipe Balbi

usb: dwc2: gadget: use reset detect interrupt

ResetDet interrupt is used to detect a reset of the bus
while the controller is suspended.
This may happens for example when using Command Verifier.
Acked-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarGregory Herrero <gregory.herrero@intel.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent ecb176c6
......@@ -2308,8 +2308,9 @@ void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
writel(GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
GINTSTS_CONIDSTSCHNG | GINTSTS_USBRST |
GINTSTS_ENUMDONE | GINTSTS_OTGINT |
GINTSTS_USBSUSP | GINTSTS_WKUPINT,
GINTSTS_RESETDET | GINTSTS_ENUMDONE |
GINTSTS_OTGINT | GINTSTS_USBSUSP |
GINTSTS_WKUPINT,
hsotg->regs + GINTMSK);
if (using_dma(hsotg))
......@@ -2475,7 +2476,19 @@ static irqreturn_t s3c_hsotg_irq(int irq, void *pw)
}
}
if (gintsts & GINTSTS_USBRST) {
if (gintsts & GINTSTS_RESETDET) {
dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__);
writel(GINTSTS_RESETDET, hsotg->regs + GINTSTS);
/* This event must be used only if controller is suspended */
if (hsotg->lx_state == DWC2_L2) {
dwc2_exit_hibernation(hsotg, true);
hsotg->lx_state = DWC2_L0;
}
}
if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
u32 usb_status = readl(hsotg->regs + GOTGCTL);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment