Commit 487bf099 authored by Nícolas F. R. A. Prado's avatar Nícolas F. R. A. Prado Committed by Daniel Lezcano

thermal/drivers/mediatek/lvts_thermal: Disable undesired interrupts

Out of the many interrupts supported by the hardware, the only ones of
interest to the driver currently are:
* The temperature went over the high offset threshold, for any of the
  sensors
* The temperature went below the low offset threshold, for any of the
  sensors
* The temperature went over the stage3 threshold

These are the only thresholds configured by the driver through the
OFFSETH, OFFSETL, and PROTTC registers, respectively.

The current interrupt mask in LVTS_MONINT_CONF, enables many more
interrupts, including data ready on sensors for both filtered and
immediate mode. These are not only not handled by the driver, but they
are also triggered too often, causing unneeded overhead. Disable these
unnecessary interrupts.

The meaning of each bit can be seen in the comment describing
LVTS_MONINTST in the IRQ handler.

Fixes: f5f633b1 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: default avatarNícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: default avatarAngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: default avatarAlexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com
parent f79e996c
......@@ -65,7 +65,7 @@
#define LVTS_HW_FILTER 0x2
#define LVTS_TSSEL_CONF 0x13121110
#define LVTS_CALSCALE_CONF 0x300
#define LVTS_MONINT_CONF 0x9FBF7BDE
#define LVTS_MONINT_CONF 0x8300318C
#define LVTS_INT_SENSOR0 0x0009001F
#define LVTS_INT_SENSOR1 0x001203E0
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment