net: sfp: move phy_start()/phy_stop() to phylink

Move phy_start() and phy_stop() into the module_start and module_stop
notifications in phylink, rather than having them in the SFP code.
This gives phylink responsibility for controlling the PHY, rather
than having SFP start and stop the PHY state machine.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/phylink.c

@@ -1767,6 +1767,26 @@ static int phylink_sfp_module_insert(void *upstream,
 	return ret;
 }
 
+static int phylink_sfp_module_start(void *upstream)
+{
+	struct phylink *pl = upstream;
+
+	/* If this SFP module has a PHY, start the PHY now. */
+	if (pl->phydev)
+		phy_start(pl->phydev);
+
+	return 0;
+}
+
+static void phylink_sfp_module_stop(void *upstream)
+{
+	struct phylink *pl = upstream;
+
+	/* If this SFP module has a PHY, stop it. */
+	if (pl->phydev)
+		phy_stop(pl->phydev);
+}
+
 static void phylink_sfp_link_down(void *upstream)
 {
 	struct phylink *pl = upstream;
@@ -1802,6 +1822,8 @@ static const struct sfp_upstream_ops sfp_phylink_ops = {
 	.attach = phylink_sfp_attach,
 	.detach = phylink_sfp_detach,
 	.module_insert = phylink_sfp_module_insert,
+	.module_start = phylink_sfp_module_start,
+	.module_stop = phylink_sfp_module_stop,
 	.link_up = phylink_sfp_link_up,
 	.link_down = phylink_sfp_link_down,
 	.connect_phy = phylink_sfp_connect_phy,

drivers/net/phy/sfp.c

@@ -1396,7 +1396,6 @@ static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state,
 
 static void sfp_sm_phy_detach(struct sfp *sfp)
 {
-	phy_stop(sfp->mod_phy);
 	sfp_remove_phy(sfp->sfp_bus);
 	phy_device_remove(sfp->mod_phy);
 	phy_device_free(sfp->mod_phy);
@@ -1427,7 +1426,6 @@ static void sfp_sm_probe_phy(struct sfp *sfp)
 	}
 
 	sfp->mod_phy = phy;
-	phy_start(phy);
 }
 
 static void sfp_sm_link_up(struct sfp *sfp)