Commit 489310a4 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller

[BNX2]: Fix remote PHY media detection problems.

The remote PHY media type and link status can change between
->probe() and ->open().  For correct operation, we need to get the
new status again during ->open().

The ethtool link test and loopback test are also fixed to work with
remote PHY.  PHY loopback is simply skipped when remote PHY is
present.
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 631a6698
......@@ -3776,12 +3776,6 @@ bnx2_init_remote_phy(struct bnx2 *bp)
return;
if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) {
if (netif_running(bp->dev)) {
val = BNX2_DRV_ACK_CAP_SIGNATURE |
BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB,
val);
}
bp->phy_flags |= REMOTE_PHY_CAP_FLAG;
val = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS);
......@@ -3789,6 +3783,22 @@ bnx2_init_remote_phy(struct bnx2 *bp)
bp->phy_port = PORT_FIBRE;
else
bp->phy_port = PORT_TP;
if (netif_running(bp->dev)) {
u32 sig;
if (val & BNX2_LINK_STATUS_LINK_UP) {
bp->link_up = 1;
netif_carrier_on(bp->dev);
} else {
bp->link_up = 0;
netif_carrier_off(bp->dev);
}
sig = BNX2_DRV_ACK_CAP_SIGNATURE |
BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB,
sig);
}
}
}
......@@ -3797,6 +3807,7 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
{
u32 val;
int i, rc = 0;
u8 old_port;
/* Wait for the current PCI transaction to complete before
* issuing a reset. */
......@@ -3875,8 +3886,9 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
return rc;
spin_lock_bh(&bp->phy_lock);
old_port = bp->phy_port;
bnx2_init_remote_phy(bp);
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
if ((bp->phy_flags & REMOTE_PHY_CAP_FLAG) && old_port != bp->phy_port)
bnx2_set_default_remote_link(bp);
spin_unlock_bh(&bp->phy_lock);
......@@ -4565,6 +4577,9 @@ bnx2_run_loopback(struct bnx2 *bp, int loopback_mode)
bnx2_set_mac_loopback(bp);
}
else if (loopback_mode == BNX2_PHY_LOOPBACK) {
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
return 0;
bp->loopback = PHY_LOOPBACK;
bnx2_set_phy_loopback(bp);
}
......@@ -4733,6 +4748,11 @@ bnx2_test_link(struct bnx2 *bp)
{
u32 bmsr;
if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
if (bp->link_up)
return 0;
return -ENODEV;
}
spin_lock_bh(&bp->phy_lock);
bnx2_enable_bmsr1(bp);
bnx2_read_phy(bp, bp->mii_bmsr1, &bmsr);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment