Merge branch 'at91-3.4-cleanup2+DT' of git://github.com/at91linux/linux-at91 into next/dt

* 'at91-3.4-cleanup2+DT' of git://github.com/at91linux/linux-at91: (22 commits)
  ARM: at91: at91sam9x5cm/dt: add leds support
  ARM: at91: usb_a9g20/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
  ARM: at91: at91sam9m10g45ek/dt: add leds support
  ARM: at91: usb_a9g20/dt: add leds support
  ARM: at91/pio: add new PIO3 features
  ARM: at91: add sam9_smc.o to at91sam9x5 build
  ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
  ARM: at91/tc: add device tree support to atmel_tclib
  ARM: at91/tclib: take iomem size from resource
  ARM: at91/pit: add traces in case of error
  ARM: at91: pit add DT support
  ARM: at91: AIC and GPIO IRQ device tree initialization
  ARM: at91/board-dt: remove AIC irq domain from board file
  ARM: at91/gpio: remove the static specification of gpio_chip.base
  ARM: at91/gpio: add .to_irq gpio_chip handler
  ARM: at91/gpio: non-DT builds do not have gpio_chip.of_node field
  ARM: at91/gpio: add irqdomain and DT support
  ARM: at91/gpio: change comments and one variable name
  ARM/USB: at91/ohci-at91: remove the use of irq_to_gpio
  ...

Documentation/devicetree/bindings/arm/atmel-aic.txt

+* Advanced Interrupt Controller (AIC)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-aic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: For single AIC system, it is an empty property.
+- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
+  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
+  The second cell is used to specify flags:
+    bits[3:0] trigger type and level flags:
+      1 = low-to-high edge triggered.
+      2 = high-to-low edge triggered.
+      4 = active high level-sensitive.
+      8 = active low level-sensitive.
+      Valid combinations are 1, 2, 3, 4, 8.
+      Default flag for internal sources should be set to 4 (active high).
+- reg: Should contain AIC registers location and length
+
+Examples:
+	/*
+	 * AIC
+	 */
+	aic: interrupt-controller@fffff000 {
+		compatible = "atmel,at91rm9200-aic";
+		interrupt-controller;
+		interrupt-parent;
+		#interrupt-cells = <2>;
+		reg = <0xfffff000 0x200>;
+	};
+
+	/*
+	 * An interrupt generating device that is wired to an AIC.
+	 */
+	dma: dma-controller@ffffec00 {
+		compatible = "atmel,at91sam9g45-dma";
+		reg = <0xffffec00 0x200>;
+		interrupts = <21 4>;
+	};

Documentation/devicetree/bindings/arm/atmel-at91.txt

+Atmel AT91 device tree bindings.
+================================
+
+PIT Timer required properties:
+- compatible: Should be "atmel,at91sam9260-pit"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt for the PIT which is the IRQ line
+  shared across all System Controller members.
+
+TC/TCLIB Timer required properties:
+- compatible: Should be "atmel,<chip>-pit".
+  <chip> can be "at91rm9200" or "at91sam9x5"
+- reg: Should contain registers location and length
+- interrupts: Should contain all interrupts for the TC block
+  Note that you can specify several interrupt cells if the TC
+  block has one interrupt per channel.
+
+Examples:
+
+One interrupt per TC block:
+	tcb0: timer@fff7c000 {
+		compatible = "atmel,at91rm9200-tcb";
+		reg = <0xfff7c000 0x100>;
+		interrupts = <18 4>;
+	};
+
+One interrupt per TC channel in a TC block:
+	tcb1: timer@fffdc000 {
+		compatible = "atmel,at91rm9200-tcb";
+		reg = <0xfffdc000 0x100>;
+		interrupts = <26 4 27 4 28 4>;
+	};

Documentation/devicetree/bindings/gpio/gpio_atmel.txt

+* Atmel GPIO controller (PIO)
+
+Required properties:
+- compatible: "atmel,<chip>-gpio", where <chip> is at91rm9200 or at91sam9x5.
+- reg: Should contain GPIO controller registers location and length
+- interrupts: Should be the port interrupt shared by all the pins.
+- #gpio-cells: Should be two.  The first cell is the pin number and
+  the second cell is used to specify optional parameters (currently
+  unused).
+- gpio-controller: Marks the device node as a GPIO controller.
+
+Example:
+	pioA: gpio@fffff200 {
+		compatible = "atmel,at91rm9200-gpio";
+		reg = <0xfffff200 0x100>;
+		interrupts = <2 4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+

arch/arm/Kconfig

@@ -322,6 +322,7 @@ config ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select IRQ_DOMAIN
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 processors.

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -23,6 +23,11 @@ aliases {
 		serial4 = &usart3;
 		serial5 = &usart4;
 		serial6 = &usart5;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
 	};
 	cpus {
 		cpu@0 {
@@ -47,24 +52,69 @@ apb {
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@fffa0000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffa0000 0x100>;
+				interrupts = <17 4 18 4 19 4>;
+			};
+
+			tcb1: timer@fffdc000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffdc000 0x100>;
+				interrupts = <26 4 27 4 28 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1>;
+				interrupts = <1 4>;
 				status = "disabled";
 			};
 
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
-				interrupts = <6>;
+				interrupts = <6 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -73,7 +123,7 @@ usart0: serial@fffb0000 {
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
-				interrupts = <7>;
+				interrupts = <7 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -82,7 +132,7 @@ usart1: serial@fffb4000 {
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
-				interrupts = <8>;
+				interrupts = <8 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -91,7 +141,7 @@ usart2: serial@fffb8000 {
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
-				interrupts = <23>;
+				interrupts = <23 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -100,7 +150,7 @@ usart3: serial@fffd0000 {
 			usart4: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
-				interrupts = <24>;
+				interrupts = <24 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -109,7 +159,7 @@ usart4: serial@fffd4000 {
 			usart5: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
-				interrupts = <25>;
+				interrupts = <25 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -118,7 +168,7 @@ usart5: serial@fffd8000 {
 			macb0: ethernet@fffc4000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
-				interrupts = <21>;
+				interrupts = <21 4>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -22,6 +22,13 @@ aliases {
 		serial2 = &usart1;
 		serial3 = &usart2;
 		serial4 = &usart3;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		gpio4 = &pioE;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
 	};
 	cpus {
 		cpu@0 {
@@ -46,30 +53,94 @@ apb {
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				interrupt-parent;
 				reg = <0xfffff000 0x200>;
 			};
 
+			pit: timer@fffffd30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffd30 0xf>;
+				interrupts = <1 4>;
+			};
+
+
+			tcb0: timer@fff7c000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfff7c000 0x100>;
+				interrupts = <18 4>;
+			};
+
+			tcb1: timer@fffd4000 {
+				compatible = "atmel,at91rm9200-tcb";
+				reg = <0xfffd4000 0x100>;
+				interrupts = <18 4>;
+			};
+
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <21>;
+				interrupts = <21 4>;
+			};
+
+			pioA: gpio@fffff200 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff200 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioB: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioC: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <4 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioD: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <5 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
+			};
+
+			pioE: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <5 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+				interrupt-controller;
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1>;
+				interrupts = <1 4>;
 				status = "disabled";
 			};
 
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7>;
+				interrupts = <7 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -78,7 +149,7 @@ usart0: serial@fff8c000 {
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8>;
+				interrupts = <8 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -87,7 +158,7 @@ usart1: serial@fff90000 {
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9>;
+				interrupts = <9 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -96,7 +167,7 @@ usart2: serial@fff94000 {
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
-				interrupts = <10>;
+				interrupts = <10 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -105,7 +176,7 @@ usart3: serial@fff98000 {
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <25>;
+				interrupts = <25 4>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -37,4 +37,76 @@ macb0: ethernet@fffbc000 {
 			};
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		d8 {
+			label = "d8";
+			gpios = <&pioD 30 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		d6 {
+			label = "d6";
+			gpios = <&pioD 0 1>;
+			linux,default-trigger = "nand-disk";
+		};
+
+		d7 {
+			label = "d7";
+			gpios = <&pioD 31 1>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		left_click {
+			label = "left_click";
+			gpios = <&pioB 6 1>;
+			linux,code = <272>;
+			gpio-key,wakeup;
+		};
+
+		right_click {
+			label = "right_click";
+			gpios = <&pioB 7 1>;
+			linux,code = <273>;
+			gpio-key,wakeup;
+		};
+
+		left {
+			label = "Joystick Left";
+			gpios = <&pioB 14 1>;
+			linux,code = <105>;
+		};
+
+		right {
+			label = "Joystick Right";
+			gpios = <&pioB 15 1>;
+			linux,code = <106>;
+		};
+
+		up {
+			label = "Joystick Up";
+			gpios = <&pioB 16 1>;
+			linux,code = <103>;
+		};
+
+		down {
+			label = "Joystick Down";
+			gpios = <&pioB 17 1>;
+			linux,code = <108>;
+		};
+
+		enter {
+			label = "Joystick Press";
+			gpios = <&pioB 18 1>;
+			linux,code = <28>;
+		};
+	};
 };

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -89,35 +89,39 @@ dma1: dma-controller@ffffee00 {
 			};
 
 			pioA: gpio@fffff400 {
-				compatible = "atmel,at91rm9200-gpio";
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 				reg = <0xfffff400 0x100>;
 				interrupts = <2 4>;
 				#gpio-cells = <2>;
 				gpio-controller;
+				interrupt-controller;
 			};
 
 			pioB: gpio@fffff600 {
-				compatible = "atmel,at91rm9200-gpio";
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 				reg = <0xfffff600 0x100>;
 				interrupts = <2 4>;
 				#gpio-cells = <2>;
 				gpio-controller;
+				interrupt-controller;
 			};
 
 			pioC: gpio@fffff800 {
-				compatible = "atmel,at91rm9200-gpio";
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 				reg = <0xfffff800 0x100>;
 				interrupts = <3 4>;
 				#gpio-cells = <2>;
 				gpio-controller;
+				interrupt-controller;
 			};
 
 			pioD: gpio@fffffa00 {
-				compatible = "atmel,at91rm9200-gpio";
+				compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 				reg = <0xfffffa00 0x100>;
 				interrupts = <3 4>;
 				#gpio-cells = <2>;
 				gpio-controller;
+				interrupt-controller;
 			};
 
 			dbgu: serial@fffff200 {

arch/arm/boot/dts/at91sam9x5cm.dtsi

@@ -11,4 +11,19 @@ / {
 	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pb18 {
+			label = "pb18";
+			gpios = <&pioB 18 1>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pd21 {
+			label = "pd21";
+			gpios = <&pioD 21 0>;
+		};
+	};
 };

arch/arm/boot/dts/usb_a9g20.dts

@@ -32,4 +32,27 @@ macb0: ethernet@fffc4000 {
 			};
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user_led {
+			label = "user_led";
+			gpios = <&pioB 21 1>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user_pb {
+			label = "user_pb";
+			gpios = <&pioB 10 1>;
+			linux,code = <28>;
+			gpio-key,wakeup;
+		};
+	};
 };

arch/arm/mach-at91/Makefile

@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_d
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o
+obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support

arch/arm/mach-at91/at91sam9260.c

@@ -209,6 +209,13 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
 	CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),

arch/arm/mach-at91/at91sam9260_devices.c

@@ -642,7 +642,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 static struct resource tcb0_resources[] = {
 	[0] = {
 		.start	= AT91SAM9260_BASE_TCB0,
-		.end	= AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
+		.end	= AT91SAM9260_BASE_TCB0 + SZ_256 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -672,7 +672,7 @@ static struct platform_device at91sam9260_tcb0_device = {
 static struct resource tcb1_resources[] = {
 	[0] = {
 		.start	= AT91SAM9260_BASE_TCB1,
-		.end	= AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
+		.end	= AT91SAM9260_BASE_TCB1 + SZ_256 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -699,8 +699,25 @@ static struct platform_device at91sam9260_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9260_tcb0_device);
 	platform_device_register(&at91sam9260_tcb1_device);
 }

arch/arm/mach-at91/at91sam926x_time.c

@@ -14,6 +14,9 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
 
@@ -133,7 +136,8 @@ static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
 	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91sam926x_pit_interrupt
+	.handler	= at91sam926x_pit_interrupt,
+	.irq		= AT91_ID_SYS,
 };
 
 static void at91sam926x_pit_reset(void)
@@ -149,6 +153,51 @@ static void at91sam926x_pit_reset(void)
 	pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id pit_timer_ids[] = {
+	{ .compatible = "atmel,at91sam9260-pit" },
+	{ /* sentinel */ }
+};
+
+static int __init of_at91sam926x_pit_init(void)
+{
+	struct device_node	*np;
+	int			ret;
+
+	np = of_find_matching_node(NULL, pit_timer_ids);
+	if (!np)
+		goto err;
+
+	pit_base_addr = of_iomap(np, 0);
+	if (!pit_base_addr)
+		goto node_err;
+
+	/* Get the interrupts property */
+	ret = irq_of_parse_and_map(np, 0);
+	if (!ret) {
+		pr_crit("AT91: PIT: Unable to get IRQ from DT\n");
+		goto ioremap_err;
+	}
+	at91sam926x_pit_irq.irq = ret;
+
+	of_node_put(np);
+
+	return 0;
+
+ioremap_err:
+	iounmap(pit_base_addr);
+node_err:
+	of_node_put(np);
+err:
+	return -EINVAL;
+}
+#else
+static int __init of_at91sam926x_pit_init(void)
+{
+	return -EINVAL;
+}
+#endif
+
 /*
  * Set up both clocksource and clockevent support.
  */
@@ -156,6 +205,10 @@ static void __init at91sam926x_pit_init(void)
 {
 	unsigned long	pit_rate;
 	unsigned	bits;
+	int		ret;
+
+	/* For device tree enabled device: initialize here */
+	of_at91sam926x_pit_init();
 
 	/*
 	 * Use our actual MCK to figure out how many MCK/16 ticks per
@@ -177,7 +230,9 @@ static void __init at91sam926x_pit_init(void)
 	clocksource_register_hz(&pit_clk, pit_rate);
 
 	/* Set up irq handler */
-	setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
+	ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
+	if (ret)
+		pr_crit("AT91: PIT: Unable to setup IRQ\n");
 
 	/* Set up and register clockevents */
 	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
@@ -193,6 +248,15 @@ static void at91sam926x_pit_suspend(void)
 
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np =
+		of_find_matching_node(NULL, pit_timer_ids);
+
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
 	pit_base_addr = ioremap(addr, 16);
 
 	if (!pit_base_addr)

arch/arm/mach-at91/at91sam9g45.c

@@ -229,6 +229,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
 	CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
 	CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
+	/* more tc lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
 	/* fake hclk clock */
 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
 	CLKDEV_CON_ID("pioA", &pioA_clk),

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1052,7 +1052,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 static struct resource tcb0_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_TCB0,
-		.end	= AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
+		.end	= AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1073,7 +1073,7 @@ static struct platform_device at91sam9g45_tcb0_device = {
 static struct resource tcb1_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_TCB1,
-		.end	= AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
+		.end	= AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -1090,8 +1090,25 @@ static struct platform_device at91sam9g45_tcb1_device = {
 	.num_resources	= ARRAY_SIZE(tcb1_resources),
 };
 
+#if defined(CONFIG_OF)
+static struct of_device_id tcb_ids[] = {
+	{ .compatible = "atmel,at91rm9200-tcb" },
+	{ /*sentinel*/ }
+};
+#endif
+
 static void __init at91_add_device_tc(void)
 {
+#if defined(CONFIG_OF)
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, tcb_ids);
+	if (np) {
+		of_node_put(np);
+		return;
+	}
+#endif
+
 	platform_device_register(&at91sam9g45_tcb0_device);
 	platform_device_register(&at91sam9g45_tcb1_device);
 }

arch/arm/mach-at91/at91sam9x5.c

@@ -301,8 +301,6 @@ static void __init at91sam9x5_map_io(void)
 
 static void __init at91sam9x5_ioremap_registers(void)
 {
-	if (of_at91sam926x_pit_init() < 0)
-		panic("Impossible to find PIT\n");
 	at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
 }
 

arch/arm/mach-at91/board-dt.c

@@ -15,7 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/gpio.h>
-#include <linux/irqdomain.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
@@ -82,15 +82,17 @@ static void __init ek_add_device_nand(void)
 	at91_add_device_nand(&ek_nand_data);
 }
 
-static const struct of_device_id aic_of_match[] __initconst = {
-	{ .compatible = "atmel,at91rm9200-aic", },
-	{},
+static const struct of_device_id irq_of_match[] __initconst = {
+
+	{ .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
+	{ .compatible = "atmel,at91rm9200-gpio", .data = at91_gpio_of_irq_setup },
+	{ .compatible = "atmel,at91sam9x5-gpio", .data = at91_gpio_of_irq_setup },
+	{ /*sentinel*/ }
 };
 
 static void __init at91_dt_init_irq(void)
 {
-	irq_domain_generate_simple(aic_of_match, 0xfffff000, 0);
-	at91_init_irq_default();
+	of_irq_init(irq_of_match);
 }
 
 static void __init at91_dt_device_init(void)

arch/arm/mach-at91/board-snapper9260.c

@@ -145,11 +145,11 @@ static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
 		/* Audio codec */
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),
 	},
-	{
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = {
 		/* RTC */
 		I2C_BOARD_INFO("isl1208", 0x6f),
-		.irq = gpio_to_irq(AT91_PIN_PA31),
-	},
 };
 
 static void __init snapper9260_add_device_nand(void)
@@ -163,6 +163,10 @@ static void __init snapper9260_board_init(void)
 {
 	at91_add_device_i2c(snapper9260_i2c_devices,
 			    ARRAY_SIZE(snapper9260_i2c_devices));
+
+	snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
+	i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
+
 	at91_add_device_serial();
 	at91_add_device_usbh(&snapper9260_usbh_data);
 	at91_add_device_udc(&snapper9260_udc_data);

arch/arm/mach-at91/generic.h

@@ -9,6 +9,7 @@
  */
 
 #include <linux/clkdev.h>
+#include <linux/of.h>
 
  /* Map io */
 extern void __init at91_map_io(void);
@@ -25,6 +26,9 @@ extern void __init at91_init_irq_default(void);
 extern void __init at91_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
+extern int  __init at91_aic_of_init(struct device_node *node,
+				    struct device_node *parent);
+
 
  /* Timer */
 struct sys_timer;
@@ -84,5 +88,7 @@ struct at91_gpio_bank {
 };
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
+extern int  __init at91_gpio_of_irq_setup(struct device_node *node,
+					  struct device_node *parent);
 
 extern int at91_extern_irq;

arch/arm/mach-at91/include/mach/at91_pio.h

@@ -40,10 +40,35 @@
 #define PIO_PUER	0x64	/* Pull-up Enable Register */
 #define PIO_PUSR	0x68	/* Pull-up Status Register */
 #define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_ABCDSR1	0x70	/* Peripheral ABCD Select Register 1 [some sam9 only] */
 #define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABCDSR2	0x74	/* Peripheral ABCD Select Register 2 [some sam9 only] */
 #define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_IFSCDR	0x80	/* Input Filter Slow Clock Disable Register */
+#define PIO_IFSCER	0x84	/* Input Filter Slow Clock Enable Register */
+#define PIO_IFSCSR	0x88	/* Input Filter Slow Clock Status Register */
+#define PIO_SCDR	0x8c	/* Slow Clock Divider Debouncing Register */
+#define		PIO_SCDR_DIV	(0x3fff <<  0)		/* Slow Clock Divider Mask */
+#define PIO_PPDDR	0x90	/* Pad Pull-down Disable Register */
+#define PIO_PPDER	0x94	/* Pad Pull-down Enable Register */
+#define PIO_PPDSR	0x98	/* Pad Pull-down Status Register */
 #define PIO_OWER	0xa0	/* Output Write Enable Register */
 #define PIO_OWDR	0xa4	/* Output Write Disable Register */
 #define PIO_OWSR	0xa8	/* Output Write Status Register */
+#define PIO_AIMER	0xb0	/* Additional Interrupt Modes Enable Register */
+#define PIO_AIMDR	0xb4	/* Additional Interrupt Modes Disable Register */
+#define PIO_AIMMR	0xb8	/* Additional Interrupt Modes Mask Register */
+#define PIO_ESR		0xc0	/* Edge Select Register */
+#define PIO_LSR		0xc4	/* Level Select Register */
+#define PIO_ELSR	0xc8	/* Edge/Level Status Register */
+#define PIO_FELLSR	0xd0	/* Falling Edge/Low Level Select Register */
+#define PIO_REHLSR	0xd4	/* Rising Edge/ High Level Select Register */
+#define PIO_FRLHSR	0xd8	/* Fall/Rise - Low/High Status Register */
+#define PIO_SCHMITT	0x100	/* Schmitt Trigger Register */
+
+#define ABCDSR_PERIPH_A	0x0
+#define ABCDSR_PERIPH_B	0x1
+#define ABCDSR_PERIPH_C	0x2
+#define ABCDSR_PERIPH_D	0x3
 
 #endif

arch/arm/mach-at91/include/mach/gpio.h

@@ -191,10 +191,15 @@
 extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
 extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
 extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
 extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
 extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
 extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
 extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
+extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
 
 /* callable at any time */
 extern int at91_set_gpio_value(unsigned pin, int value);
@@ -204,18 +209,6 @@ extern int at91_get_gpio_value(unsigned pin);
 extern void at91_gpio_suspend(void);
 extern void at91_gpio_resume(void);
 
-/*-------------------------------------------------------------------------*/
-
-/* wrappers for "new style" GPIO calls. the old AT91-specific ones should
- * eventually be removed (along with this errno.h inclusion), and the
- * gpio request/free calls should probably be implemented.
- */
-
-#include <asm/errno.h>
-
-#define gpio_to_irq(gpio) (gpio + NR_AIC_IRQS)
-#define irq_to_gpio(irq)  (irq - NR_AIC_IRQS)
-
 #endif	/* __ASSEMBLY__ */
 
 #endif

arch/arm/mach-at91/irq.c

@@ -24,6 +24,12 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -34,22 +40,24 @@
 #include <asm/mach/map.h>
 
 void __iomem *at91_aic_base;
+static struct irq_domain *at91_aic_domain;
+static struct device_node *at91_aic_np;
 
 static void at91_aic_mask_irq(struct irq_data *d)
 {
 	/* Disable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
+	at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
 }
 
 static void at91_aic_unmask_irq(struct irq_data *d)
 {
 	/* Enable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
+	at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
 }
 
 unsigned int at91_extern_irq;
 
-#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
 
 static int at91_aic_set_type(struct irq_data *d, unsigned type)
 {
@@ -63,13 +71,13 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
-		if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq))		/* only supported on external interrupts */
+		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq))		/* only supported on external interrupts */
+		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
 			return -EINVAL;
@@ -78,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
 		return -EINVAL;
 	}
 
-	smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
-	at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
+	smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
+	at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
 	return 0;
 }
 
@@ -90,13 +98,13 @@ static u32 backups;
 
 static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 {
-	if (unlikely(d->irq >= 32))
+	if (unlikely(d->hwirq >= NR_AIC_IRQS))
 		return -EINVAL;
 
 	if (value)
-		wakeups |= (1 << d->irq);
+		wakeups |= (1 << d->hwirq);
 	else
-		wakeups &= ~(1 << d->irq);
+		wakeups &= ~(1 << d->hwirq);
 
 	return 0;
 }
@@ -127,46 +135,112 @@ static struct irq_chip at91_aic_chip = {
 	.irq_set_wake	= at91_aic_set_wake,
 };
 
+static void __init at91_aic_hw_init(unsigned int spu_vector)
+{
+	int i;
+
+	/*
+	 * Perform 8 End Of Interrupt Command to make sure AIC
+	 * will not Lock out nIRQ
+	 */
+	for (i = 0; i < 8; i++)
+		at91_aic_write(AT91_AIC_EOICR, 0);
+
+	/*
+	 * Spurious Interrupt ID in Spurious Vector Register.
+	 * When there is no current interrupt, the IRQ Vector Register
+	 * reads the value stored in AIC_SPU
+	 */
+	at91_aic_write(AT91_AIC_SPU, spu_vector);
+
+	/* No debugging in AIC: Debug (Protect) Control Register */
+	at91_aic_write(AT91_AIC_DCR, 0);
+
+	/* Disable and clear all interrupts initially */
+	at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
+	at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+}
+
+#if defined(CONFIG_OF)
+static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq,
+							irq_hw_number_t hw)
+{
+	/* Put virq number in Source Vector Register */
+	at91_aic_write(AT91_AIC_SVR(hw), virq);
+
+	/* Active Low interrupt, without priority */
+	at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW);
+
+	irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq);
+	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+	return 0;
+}
+
+static struct irq_domain_ops at91_aic_irq_ops = {
+	.map	= at91_aic_irq_map,
+	.xlate	= irq_domain_xlate_twocell,
+};
+
+int __init at91_aic_of_init(struct device_node *node,
+				     struct device_node *parent)
+{
+	at91_aic_base = of_iomap(node, 0);
+	at91_aic_np = node;
+
+	at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS,
+						&at91_aic_irq_ops, NULL);
+	if (!at91_aic_domain)
+		panic("Unable to add AIC irq domain (DT)\n");
+
+	irq_set_default_host(at91_aic_domain);
+
+	at91_aic_hw_init(NR_AIC_IRQS);
+
+	return 0;
+}
+#endif
+
 /*
  * Initialize the AIC interrupt controller.
  */
 void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 {
 	unsigned int i;
+	int irq_base;
 
 	at91_aic_base = ioremap(AT91_AIC, 512);
-
 	if (!at91_aic_base)
-		panic("Impossible to ioremap AT91_AIC\n");
+		panic("Unable to ioremap AIC registers\n");
+
+	/* Add irq domain for AIC */
+	irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0);
+	if (irq_base < 0) {
+		WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
+		irq_base = 0;
+	}
+	at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS,
+						irq_base, 0,
+						&irq_domain_simple_ops, NULL);
+
+	if (!at91_aic_domain)
+		panic("Unable to add AIC irq domain\n");
+
+	irq_set_default_host(at91_aic_domain);
 
 	/*
 	 * The IVR is used by macro get_irqnr_and_base to read and verify.
 	 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
 	 */
 	for (i = 0; i < NR_AIC_IRQS; i++) {
-		/* Put irq number in Source Vector Register: */
+		/* Put hardware irq number in Source Vector Register: */
 		at91_aic_write(AT91_AIC_SVR(i), i);
 		/* Active Low interrupt, with the specified priority */
 		at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
 
 		irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-
-		/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
-		if (i < 8)
-			at91_aic_write(AT91_AIC_EOICR, 0);
 	}
 
-	/*
-	 * Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
-	 * When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
-	 */
-	at91_aic_write(AT91_AIC_SPU, NR_AIC_IRQS);
-
-	/* No debugging in AIC: Debug (Protect) Control Register */
-	at91_aic_write(AT91_AIC_DCR, 0);
-
-	/* Disable and clear all interrupts initially */
-	at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
-	at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
+	at91_aic_hw_init(NR_AIC_IRQS);
 }

drivers/clocksource/tcb_clksrc.c

@@ -19,6 +19,8 @@
  *   - Two channels combine to create a free-running 32 bit counter
  *     with a base rate of 5+ MHz, packaged as a clocksource (with
  *     resolution better than 200 nsec).
+ *   - Some chips support 32 bit counter. A single channel is used for
+ *     this 32 bit free-running counter. the second channel is not used.
  *
  *   - The third channel may be used to provide a 16-bit clockevent
  *     source, used in either periodic or oneshot mode.  This runs
@@ -54,6 +56,11 @@ static cycle_t tc_get_cycles(struct clocksource *cs)
 	return (upper << 16) | lower;
 }
 
+static cycle_t tc_get_cycles32(struct clocksource *cs)
+{
+	return __raw_readl(tcaddr + ATMEL_TC_REG(0, CV));
+}
+
 static struct clocksource clksrc = {
 	.name           = "tcb_clksrc",
 	.rating         = 200,
@@ -209,6 +216,48 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 
 #endif
 
+static void __init tcb_setup_dual_chan(struct atmel_tc *tc, int mck_divisor_idx)
+{
+	/* channel 0:  waveform mode, input mclk/8, clock TIOA0 on overflow */
+	__raw_writel(mck_divisor_idx			/* likely divide-by-8 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP		/* free-run */
+			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
+			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
+			tcaddr + ATMEL_TC_REG(0, CMR));
+	__raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
+	__raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+	/* channel 1:  waveform mode, input TIOA0 */
+	__raw_writel(ATMEL_TC_XC1			/* input: TIOA0 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP,		/* free-run */
+			tcaddr + ATMEL_TC_REG(1, CMR));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
+
+	/* chain channel 0 to channel 1*/
+	__raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
+	/* then reset all the timers */
+	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
+static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idx)
+{
+	/* channel 0:  waveform mode, input mclk/8 */
+	__raw_writel(mck_divisor_idx			/* likely divide-by-8 */
+			| ATMEL_TC_WAVE
+			| ATMEL_TC_WAVESEL_UP,		/* free-run */
+			tcaddr + ATMEL_TC_REG(0, CMR));
+	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
+	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
+
+	/* then reset all the timers */
+	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+}
+
 static int __init tcb_clksrc_init(void)
 {
 	static char bootinfo[] __initdata
@@ -260,34 +309,19 @@ static int __init tcb_clksrc_init(void)
 			divided_rate / 1000000,
 			((divided_rate + 500000) % 1000000) / 1000);
 
-	/* tclib will give us three clocks no matter what the
-	 * underlying platform supports.
-	 */
-	clk_enable(tc->clk[1]);
-
-	/* channel 0:  waveform mode, input mclk/8, clock TIOA0 on overflow */
-	__raw_writel(best_divisor_idx			/* likely divide-by-8 */
-			| ATMEL_TC_WAVE
-			| ATMEL_TC_WAVESEL_UP		/* free-run */
-			| ATMEL_TC_ACPA_SET		/* TIOA0 rises at 0 */
-			| ATMEL_TC_ACPC_CLEAR,		/* (duty cycle 50%) */
-			tcaddr + ATMEL_TC_REG(0, CMR));
-	__raw_writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA));
-	__raw_writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC));
-	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR));	/* no irqs */
-	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR));
-
-	/* channel 1:  waveform mode, input TIOA0 */
-	__raw_writel(ATMEL_TC_XC1			/* input: TIOA0 */
-			| ATMEL_TC_WAVE
-			| ATMEL_TC_WAVESEL_UP,		/* free-run */
-			tcaddr + ATMEL_TC_REG(1, CMR));
-	__raw_writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR));	/* no irqs */
-	__raw_writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR));
-
-	/* chain channel 0 to channel 1, then reset all the timers */
-	__raw_writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR);
-	__raw_writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR);
+	if (tc->tcb_config && tc->tcb_config->counter_width == 32) {
+		/* use apropriate function to read 32 bit counter */
+		clksrc.read = tc_get_cycles32;
+		/* setup ony channel 0 */
+		tcb_setup_single_chan(tc, best_divisor_idx);
+	} else {
+		/* tclib will give us three clocks no matter what the
+		 * underlying platform supports.
+		 */
+		clk_enable(tc->clk[1]);
+		/* setup both channel 0 & 1 */
+		tcb_setup_dual_chan(tc, best_divisor_idx);
+	}
 
 	/* and away we go! */
 	clocksource_register_hz(&clksrc, divided_rate);

drivers/misc/atmel_tclib.c

@@ -6,12 +6,10 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/export.h>
-
-/* Number of bytes to reserve for the iomem resource */
-#define ATMEL_TC_IOMEM_SIZE	256
-
+#include <linux/of.h>
 
 /*
  * This is a thin library to solve the problem of how to portably allocate
@@ -48,10 +46,17 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
 	struct atmel_tc		*tc;
 	struct platform_device	*pdev = NULL;
 	struct resource		*r;
+	size_t			size;
 
 	spin_lock(&tc_list_lock);
 	list_for_each_entry(tc, &tc_list, node) {
-		if (tc->pdev->id == block) {
+		if (tc->pdev->dev.of_node) {
+			if (of_alias_get_id(tc->pdev->dev.of_node, "tcb")
+					== block) {
+				pdev = tc->pdev;
+				break;
+			}
+		} else if (tc->pdev->id == block) {
 			pdev = tc->pdev;
 			break;
 		}
@@ -61,11 +66,15 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
 		goto fail;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	r = request_mem_region(r->start, ATMEL_TC_IOMEM_SIZE, name);
 	if (!r)
 		goto fail;
 
-	tc->regs = ioremap(r->start, ATMEL_TC_IOMEM_SIZE);
+	size = resource_size(r);
+	r = request_mem_region(r->start, size, name);
+	if (!r)
+		goto fail;
+
+	tc->regs = ioremap(r->start, size);
 	if (!tc->regs)
 		goto fail_ioremap;
 
@@ -76,7 +85,7 @@ struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name)
 	return tc;
 
 fail_ioremap:
-	release_mem_region(r->start, ATMEL_TC_IOMEM_SIZE);
+	release_mem_region(r->start, size);
 fail:
 	tc = NULL;
 	goto out;
@@ -96,7 +105,7 @@ void atmel_tc_free(struct atmel_tc *tc)
 	spin_lock(&tc_list_lock);
 	if (tc->regs) {
 		iounmap(tc->regs);
-		release_mem_region(tc->iomem->start, ATMEL_TC_IOMEM_SIZE);
+		release_mem_region(tc->iomem->start, resource_size(tc->iomem));
 		tc->regs = NULL;
 		tc->iomem = NULL;
 	}
@@ -104,6 +113,30 @@ void atmel_tc_free(struct atmel_tc *tc)
 }
 EXPORT_SYMBOL_GPL(atmel_tc_free);
 
+#if defined(CONFIG_OF)
+static struct atmel_tcb_config tcb_rm9200_config = {
+	.counter_width = 16,
+};
+
+static struct atmel_tcb_config tcb_sam9x5_config = {
+	.counter_width = 32,
+};
+
+static const struct of_device_id atmel_tcb_dt_ids[] = {
+	{
+		.compatible = "atmel,at91rm9200-tcb",
+		.data = &tcb_rm9200_config,
+	}, {
+		.compatible = "atmel,at91sam9x5-tcb",
+		.data = &tcb_sam9x5_config,
+	}, {
+		/* sentinel */
+	}
+};
+
+MODULE_DEVICE_TABLE(of, atmel_tcb_dt_ids);
+#endif
+
 static int __init tc_probe(struct platform_device *pdev)
 {
 	struct atmel_tc *tc;
@@ -129,6 +162,14 @@ static int __init tc_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* Now take SoC information if available */
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(atmel_tcb_dt_ids, pdev->dev.of_node);
+		if (match)
+			tc->tcb_config = match->data;
+	}
+
 	tc->clk[0] = clk;
 	tc->clk[1] = clk_get(&pdev->dev, "t1_clk");
 	if (IS_ERR(tc->clk[1]))
@@ -153,7 +194,10 @@ static int __init tc_probe(struct platform_device *pdev)
 }
 
 static struct platform_driver tc_driver = {
-	.driver.name	= "atmel_tcb",
+	.driver = {
+		.name	= "atmel_tcb",
+		.of_match_table	= of_match_ptr(atmel_tcb_dt_ids),
+	},
 };
 
 static int __init tc_init(void)

drivers/usb/host/ohci-at91.c

@@ -448,10 +448,11 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 
 	/* From the GPIO notifying the over-current situation, find
 	 * out the corresponding port */
-	gpio = irq_to_gpio(irq);
 	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
-		if (pdata->overcurrent_pin[port] == gpio)
+		if (gpio_to_irq(pdata->overcurrent_pin[port]) == irq) {
+			gpio = pdata->overcurrent_pin[port];
 			break;
+		}
 	}
 
 	if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {

include/linux/atmel_tc.h

@@ -33,11 +33,20 @@
 
 struct clk;
 
+/**
+ * struct atmel_tcb_config - SoC data for a Timer/Counter Block
+ * @counter_width: size in bits of a timer counter register
+ */
+struct atmel_tcb_config {
+	size_t	counter_width;
+};
+
 /**
  * struct atmel_tc - information about a Timer/Counter Block
  * @pdev: physical device
  * @iomem: resource associated with the I/O register
  * @regs: mapping through which the I/O registers can be accessed
+ * @tcb_config: configuration data from SoC
  * @irq: irq for each of the three channels
  * @clk: internal clock source for each of the three channels
  * @node: list node, for tclib internal use
@@ -54,6 +63,7 @@ struct atmel_tc {
 	struct platform_device	*pdev;
 	struct resource		*iomem;
 	void __iomem		*regs;
+	struct atmel_tcb_config	*tcb_config;
 	int			irq[3];
 	struct clk		*clk[3];
 	struct list_head	node;