net: phy: realtek: use genphy_read_abilities

Use new function genphy_read_abilities(). This allows to remove all
calls to genphy_config_init().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/realtek.c

@@ -151,21 +151,14 @@ static int rtl8211_config_aneg(struct phy_device *phydev)
 static int rtl8211c_config_init(struct phy_device *phydev)
 {
 	/* RTL8211C has an issue when operating in Gigabit slave mode */
-	phy_set_bits(phydev, MII_CTRL1000,
-		     CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
-
-	return genphy_config_init(phydev);
+	return phy_set_bits(phydev, MII_CTRL1000,
+			    CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
 }
 
 static int rtl8211f_config_init(struct phy_device *phydev)
 {
-	int ret;
 	u16 val = 0;
 
-	ret = genphy_config_init(phydev);
-	if (ret < 0)
-		return ret;
-
 	/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
 	if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
@@ -192,10 +185,6 @@ static int rtl8366rb_config_init(struct phy_device *phydev)
 {
 	int ret;
 
-	ret = genphy_config_init(phydev);
-	if (ret < 0)
-		return ret;
-
 	ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
 			   RTL8366RB_POWER_SAVE_ON);
 	if (ret) {
@@ -210,11 +199,11 @@ static struct phy_driver realtek_drvs[] = {
 	{
 		PHY_ID_MATCH_EXACT(0x00008201),
 		.name           = "RTL8201CP Ethernet",
-		.features       = PHY_BASIC_FEATURES,
+		.get_features	= genphy_read_abilities,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc816),
 		.name		= "RTL8201F Fast Ethernet",
-		.features	= PHY_BASIC_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.ack_interrupt	= &rtl8201_ack_interrupt,
 		.config_intr	= &rtl8201_config_intr,
 		.suspend	= genphy_suspend,
@@ -224,14 +213,14 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc910),
 		.name		= "RTL8211 Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.config_aneg	= rtl8211_config_aneg,
 		.read_mmd	= &genphy_read_mmd_unsupported,
 		.write_mmd	= &genphy_write_mmd_unsupported,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc912),
 		.name		= "RTL8211B Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211b_config_intr,
 		.read_mmd	= &genphy_read_mmd_unsupported,
@@ -241,14 +230,14 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc913),
 		.name		= "RTL8211C Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.config_init	= rtl8211c_config_init,
 		.read_mmd	= &genphy_read_mmd_unsupported,
 		.write_mmd	= &genphy_write_mmd_unsupported,
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc914),
 		.name		= "RTL8211DN Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.ack_interrupt	= rtl821x_ack_interrupt,
 		.config_intr	= rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
@@ -256,7 +245,7 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc915),
 		.name		= "RTL8211E Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.ack_interrupt	= &rtl821x_ack_interrupt,
 		.config_intr	= &rtl8211e_config_intr,
 		.suspend	= genphy_suspend,
@@ -264,7 +253,7 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc916),
 		.name		= "RTL8211F Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.config_init	= &rtl8211f_config_init,
 		.ack_interrupt	= &rtl8211f_ack_interrupt,
 		.config_intr	= &rtl8211f_config_intr,
@@ -275,8 +264,7 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc800),
 		.name		= "Generic Realtek PHY",
-		.features	= PHY_GBIT_FEATURES,
-		.config_init	= genphy_config_init,
+		.get_features	= genphy_read_abilities,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
 		.read_page	= rtl821x_read_page,
@@ -284,7 +272,7 @@ static struct phy_driver realtek_drvs[] = {
 	}, {
 		PHY_ID_MATCH_EXACT(0x001cc961),
 		.name		= "RTL8366RB Gigabit Ethernet",
-		.features	= PHY_GBIT_FEATURES,
+		.get_features	= genphy_read_abilities,
 		.config_init	= &rtl8366rb_config_init,
 		/* These interrupts are handled by the irq controller
 		 * embedded inside the RTL8366RB, they get unmasked when the