Commit 48e902f0 authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  power_supply_sysfs: Handle -ENODATA in a special way
  wm831x_backup: Remove unused variables
  gta02: Set pcf50633 charger_reference_current_ma
  pcf50633: Query charger status directly
  pcf50633: Properly reenable charging when the supply conditions change
  pcf50633: Get rid of charging restart software auto-triggering
  pcf50633: introduces battery charging current control
  pcf50633: Add ac power supply class to the charger
  wm831x: Factor out WM831x backup battery charger
parents 7f6cd540 9d233e8b
......@@ -268,6 +268,9 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.batteries = gta02_batteries,
.num_batteries = ARRAY_SIZE(gta02_batteries),
.charger_reference_current_ma = 1000,
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
......
......@@ -808,6 +808,9 @@ static struct resource wm831x_wdt_resources[] = {
};
static struct mfd_cell wm8310_devs[] = {
{
.name = "wm831x-backup",
},
{
.name = "wm831x-buckv",
.id = 1,
......@@ -961,6 +964,9 @@ static struct mfd_cell wm8310_devs[] = {
};
static struct mfd_cell wm8311_devs[] = {
{
.name = "wm831x-backup",
},
{
.name = "wm831x-buckv",
.id = 1,
......@@ -1095,6 +1101,9 @@ static struct mfd_cell wm8311_devs[] = {
};
static struct mfd_cell wm8312_devs[] = {
{
.name = "wm831x-backup",
},
{
.name = "wm831x-buckv",
.id = 1,
......
......@@ -29,6 +29,13 @@ config APM_POWER
Say Y here to enable support APM status emulation using
battery class devices.
config WM831X_BACKUP
tristate "WM831X backup battery charger support"
depends on MFD_WM831X
help
Say Y here to enable support for the backup battery charger
in the Wolfson Microelectronics WM831x PMICs.
config WM831X_POWER
tristate "WM831X PMU support"
depends on MFD_WM831X
......
......@@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
......
This diff is collapsed.
......@@ -65,7 +65,10 @@ static ssize_t power_supply_show_property(struct device *dev,
ret = psy->get_property(psy, off, &value);
if (ret < 0) {
if (ret != -ENODEV)
if (ret == -ENODATA)
dev_dbg(dev, "driver has no data for `%s' property\n",
attr->attr.name);
else if (ret != -ENODEV)
dev_err(dev, "driver failed to report `%s' property\n",
attr->attr.name);
return ret;
......
/*
* Backup battery driver for Wolfson Microelectronics wm831x PMICs
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/mfd/wm831x/pmu.h>
#include <linux/mfd/wm831x/pdata.h>
struct wm831x_backup {
struct wm831x *wm831x;
struct power_supply backup;
};
static int wm831x_backup_read_voltage(struct wm831x *wm831x,
enum wm831x_auxadc src,
union power_supply_propval *val)
{
int ret;
ret = wm831x_auxadc_read_uv(wm831x, src);
if (ret >= 0)
val->intval = ret;
return ret;
}
/*********************************************************************
* Backup supply properties
*********************************************************************/
static void wm831x_config_backup(struct wm831x *wm831x)
{
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
struct wm831x_backup_pdata *pdata;
int ret, reg;
if (!wm831x_pdata || !wm831x_pdata->backup) {
dev_warn(wm831x->dev,
"No backup battery charger configuration\n");
return;
}
pdata = wm831x_pdata->backup;
reg = 0;
if (pdata->charger_enable)
reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
if (pdata->no_constant_voltage)
reg |= WM831X_BKUP_CHG_MODE;
switch (pdata->vlim) {
case 2500:
break;
case 3100:
reg |= WM831X_BKUP_CHG_VLIM;
break;
default:
dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
pdata->vlim);
}
switch (pdata->ilim) {
case 100:
break;
case 200:
reg |= 1;
break;
case 300:
reg |= 2;
break;
case 400:
reg |= 3;
break;
default:
dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
pdata->ilim);
}
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
return;
}
ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
WM831X_BKUP_CHG_ENA_MASK |
WM831X_BKUP_CHG_MODE_MASK |
WM831X_BKUP_BATT_DET_ENA_MASK |
WM831X_BKUP_CHG_VLIM_MASK |
WM831X_BKUP_CHG_ILIM_MASK,
reg);
if (ret != 0)
dev_err(wm831x->dev,
"Failed to set backup charger config: %d\n", ret);
wm831x_reg_lock(wm831x);
}
static int wm831x_backup_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_backup *devdata = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = devdata->wm831x;
int ret = 0;
ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
if (ret < 0)
return ret;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_backup_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
val);
break;
case POWER_SUPPLY_PROP_PRESENT:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = 1;
else
val->intval = 0;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_backup_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_PRESENT,
};
/*********************************************************************
* Initialisation
*********************************************************************/
static __devinit int wm831x_backup_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_backup *devdata;
struct power_supply *backup;
int ret;
devdata = kzalloc(sizeof(struct wm831x_backup), GFP_KERNEL);
if (devdata == NULL)
return -ENOMEM;
devdata->wm831x = wm831x;
platform_set_drvdata(pdev, devdata);
backup = &devdata->backup;
/* We ignore configuration failures since we can still read
* back the status without enabling the charger (which may
* already be enabled anyway).
*/
wm831x_config_backup(wm831x);
backup->name = "wm831x-backup";
backup->type = POWER_SUPPLY_TYPE_BATTERY;
backup->properties = wm831x_backup_props;
backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
backup->get_property = wm831x_backup_get_prop;
ret = power_supply_register(&pdev->dev, backup);
if (ret)
goto err_kmalloc;
return ret;
err_kmalloc:
kfree(devdata);
return ret;
}
static __devexit int wm831x_backup_remove(struct platform_device *pdev)
{
struct wm831x_backup *devdata = platform_get_drvdata(pdev);
power_supply_unregister(&devdata->backup);
kfree(devdata);
return 0;
}
static struct platform_driver wm831x_backup_driver = {
.probe = wm831x_backup_probe,
.remove = __devexit_p(wm831x_backup_remove),
.driver = {
.name = "wm831x-backup",
},
};
static int __init wm831x_backup_init(void)
{
return platform_driver_register(&wm831x_backup_driver);
}
module_init(wm831x_backup_init);
static void __exit wm831x_backup_exit(void)
{
platform_driver_unregister(&wm831x_backup_driver);
}
module_exit(wm831x_backup_exit);
MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-backup");
......@@ -21,7 +21,6 @@
struct wm831x_power {
struct wm831x *wm831x;
struct power_supply wall;
struct power_supply backup;
struct power_supply usb;
struct power_supply battery;
};
......@@ -453,125 +452,6 @@ static irqreturn_t wm831x_bat_irq(int irq, void *data)
}
/*********************************************************************
* Backup supply properties
*********************************************************************/
static void wm831x_config_backup(struct wm831x *wm831x)
{
struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
struct wm831x_backup_pdata *pdata;
int ret, reg;
if (!wm831x_pdata || !wm831x_pdata->backup) {
dev_warn(wm831x->dev,
"No backup battery charger configuration\n");
return;
}
pdata = wm831x_pdata->backup;
reg = 0;
if (pdata->charger_enable)
reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
if (pdata->no_constant_voltage)
reg |= WM831X_BKUP_CHG_MODE;
switch (pdata->vlim) {
case 2500:
break;
case 3100:
reg |= WM831X_BKUP_CHG_VLIM;
break;
default:
dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
pdata->vlim);
}
switch (pdata->ilim) {
case 100:
break;
case 200:
reg |= 1;
break;
case 300:
reg |= 2;
break;
case 400:
reg |= 3;
break;
default:
dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
pdata->ilim);
}
ret = wm831x_reg_unlock(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
return;
}
ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
WM831X_BKUP_CHG_ENA_MASK |
WM831X_BKUP_CHG_MODE_MASK |
WM831X_BKUP_BATT_DET_ENA_MASK |
WM831X_BKUP_CHG_VLIM_MASK |
WM831X_BKUP_CHG_ILIM_MASK,
reg);
if (ret != 0)
dev_err(wm831x->dev,
"Failed to set backup charger config: %d\n", ret);
wm831x_reg_lock(wm831x);
}
static int wm831x_backup_get_prop(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
struct wm831x *wm831x = wm831x_power->wm831x;
int ret = 0;
ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
if (ret < 0)
return ret;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = POWER_SUPPLY_STATUS_CHARGING;
else
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
val);
break;
case POWER_SUPPLY_PROP_PRESENT:
if (ret & WM831X_BKUP_CHG_STS)
val->intval = 1;
else
val->intval = 0;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum power_supply_property wm831x_backup_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_PRESENT,
};
/*********************************************************************
* Initialisation
*********************************************************************/
......@@ -595,10 +475,7 @@ static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
dev_dbg(wm831x->dev, "Power source changed\n");
/* Just notify for everything - little harm in overnotifying.
* The backup battery is not a power source while the system
* is running so skip that.
*/
/* Just notify for everything - little harm in overnotifying. */
power_supply_changed(&wm831x_power->battery);
power_supply_changed(&wm831x_power->usb);
power_supply_changed(&wm831x_power->wall);
......@@ -613,7 +490,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
struct power_supply *usb;
struct power_supply *battery;
struct power_supply *wall;
struct power_supply *backup;
int ret, irq, i;
power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
......@@ -626,13 +502,11 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
usb = &power->usb;
battery = &power->battery;
wall = &power->wall;
backup = &power->backup;
/* We ignore configuration failures since we can still read back
* the status without enabling either of the chargers.
* the status without enabling the charger.
*/
wm831x_config_battery(wm831x);
wm831x_config_backup(wm831x);
wall->name = "wm831x-wall";
wall->type = POWER_SUPPLY_TYPE_MAINS;
......@@ -661,15 +535,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
if (ret)
goto err_battery;
backup->name = "wm831x-backup";
backup->type = POWER_SUPPLY_TYPE_BATTERY;
backup->properties = wm831x_backup_props;
backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
backup->get_property = wm831x_backup_get_prop;
ret = power_supply_register(&pdev->dev, backup);
if (ret)
goto err_usb;
irq = platform_get_irq_byname(pdev, "SYSLO");
ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
IRQF_TRIGGER_RISING, "SYSLO",
......@@ -677,7 +542,7 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
if (ret != 0) {
dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
irq, ret);
goto err_backup;
goto err_usb;
}
irq = platform_get_irq_byname(pdev, "PWR SRC");
......@@ -716,8 +581,6 @@ static __devinit int wm831x_power_probe(struct platform_device *pdev)
err_syslo:
irq = platform_get_irq_byname(pdev, "SYSLO");
wm831x_free_irq(wm831x, irq, power);
err_backup:
power_supply_unregister(backup);
err_usb:
power_supply_unregister(usb);
err_battery:
......@@ -746,7 +609,6 @@ static __devexit int wm831x_power_remove(struct platform_device *pdev)
irq = platform_get_irq_byname(pdev, "SYSLO");
wm831x_free_irq(wm831x, irq, wm831x_power);
power_supply_unregister(&wm831x_power->backup);
power_supply_unregister(&wm831x_power->battery);
power_supply_unregister(&wm831x_power->wall);
power_supply_unregister(&wm831x_power->usb);
......
......@@ -29,7 +29,12 @@ struct pcf50633_platform_data {
char **batteries;
int num_batteries;
int charging_restart_interval;
/*
* Should be set accordingly to the reference resistor used, see
* I_{ch(ref)} charger reference current in the pcf50633 User
* Manual.
*/
int charger_reference_current_ma;
/* Callbacks */
void (*probe_done)(struct pcf50633 *);
......
......@@ -128,6 +128,7 @@ enum pcf50633_reg_mbcs3 {
int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
int pcf50633_mbc_get_status(struct pcf50633 *);
int pcf50633_mbc_get_usb_online_status(struct pcf50633 *);
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment