Commit 49122145 authored by Florian Fainelli's avatar Florian Fainelli Committed by Arnd Bergmann

arm: mvebu: add DTS file for Marvell RD-A370-A1 board

This patch adds the DTS file to support the Marvell RD-A370-A1
(Reference Design board) also known as RD-88F6710 board. It is almost
entirely similar to the DB-A370 board except that the first Ethernet PHY
is SGMII-wired and the second is a switch which is RGMII-wired.
Signed-off-by: default avatarFlorian Fainelli <florian@openwrt.org>
Signed-off-by: default avatarJason Cooper <jason@lakedaemon.net>
parent 3202bf01
...@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ ...@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \
msm8960-cdp.dtb msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \ armada-370-mirabox.dtb \
armada-370-rd.dtb \
armada-xp-db.dtb \ armada-xp-db.dtb \
armada-xp-openblocks-ax3-4.dtb armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
......
/*
* Device Tree file for Marvell Armada 370 Reference Design board
* (RD-88F6710-A1)
*
* Copied from arch/arm/boot/dts/armada-370-db.dts
*
* Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
/include/ "armada-370.dtsi"
/ {
model = "Marvell Armada 370 Reference Design";
compatible = "marvell,a370-rd", "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
serial@d0012000 {
clock-frequency = <200000000>;
status = "okay";
};
sata@d00a0000 {
nr-ports = <2>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@d0070000 {
status = "okay";
phy = <&phy0>;
phy-mode = "sgmii";
};
ethernet@d0074000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment