Commit 493bc90a authored by Alexander Aring's avatar Alexander Aring Committed by Marcel Holtmann

at86rf230: add debugfs support

This patch introduce debugfs support for collect trac status stats. To
clear the stats ifdown the interface of at86rf230 and start the
interface again.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Reviewed-by: default avatarStefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent ed4a26b0
......@@ -32,6 +32,13 @@ config IEEE802154_AT86RF230
This driver can also be built as a module. To do so, say M here.
the module will be called 'at86rf230'.
config IEEE802154_AT86RF230_DEBUGFS
depends on IEEE802154_AT86RF230
bool "AT86RF230 debugfs interface"
depends on DEBUG_FS
---help---
This option compiles debugfs code for the at86rf230 driver.
config IEEE802154_MRF24J40
tristate "Microchip MRF24J40 transceiver driver"
depends on IEEE802154_DRIVERS && MAC802154
......
......@@ -31,6 +31,7 @@
#include <linux/skbuff.h>
#include <linux/of_gpio.h>
#include <linux/ieee802154.h>
#include <linux/debugfs.h>
#include <net/mac802154.h>
#include <net/cfg802154.h>
......@@ -83,6 +84,15 @@ struct at86rf230_state_change {
bool irq_enable;
};
struct at86rf230_trac {
u64 success;
u64 success_data_pending;
u64 success_wait_for_ack;
u64 channel_access_failure;
u64 no_ack;
u64 invalid;
};
struct at86rf230_local {
struct spi_device *spi;
......@@ -103,6 +113,8 @@ struct at86rf230_local {
u8 tx_retry;
struct sk_buff *tx_skb;
struct at86rf230_state_change tx;
struct at86rf230_trac trac;
};
#define AT86RF2XX_NUMREGS 0x3F
......@@ -660,6 +672,31 @@ at86rf230_tx_trac_check(void *context)
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
u8 trac = TRAC_MASK(ctx->buf[1]);
switch (trac) {
case TRAC_SUCCESS:
lp->trac.success++;
break;
case TRAC_SUCCESS_DATA_PENDING:
lp->trac.success_data_pending++;
break;
case TRAC_CHANNEL_ACCESS_FAILURE:
lp->trac.channel_access_failure++;
break;
case TRAC_NO_ACK:
lp->trac.no_ack++;
break;
case TRAC_INVALID:
lp->trac.invalid++;
break;
default:
WARN_ONCE(1, "received tx trac status %d\n", trac);
break;
}
}
at86rf230_async_state_change(lp, &lp->irq, STATE_TX_ON,
at86rf230_tx_on, true);
}
......@@ -696,13 +733,32 @@ at86rf230_rx_read_frame_complete(void *context)
}
static void
at86rf230_rx_read_frame(void *context)
at86rf230_rx_trac_check(void *context)
{
struct at86rf230_state_change *ctx = context;
struct at86rf230_local *lp = ctx->lp;
u8 *buf = ctx->buf;
int rc;
if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
u8 trac = TRAC_MASK(buf[1]);
switch (trac) {
case TRAC_SUCCESS:
lp->trac.success++;
break;
case TRAC_SUCCESS_WAIT_FOR_ACK:
lp->trac.success_wait_for_ack++;
break;
case TRAC_INVALID:
lp->trac.invalid++;
break;
default:
WARN_ONCE(1, "received rx trac status %d\n", trac);
break;
}
}
buf[0] = CMD_FB;
ctx->trx.len = AT86RF2XX_MAX_BUF;
ctx->msg.complete = at86rf230_rx_read_frame_complete;
......@@ -714,18 +770,6 @@ at86rf230_rx_read_frame(void *context)
}
}
static void
at86rf230_rx_trac_check(void *context)
{
/* Possible check on trac status here. This could be useful to make
* some stats why receive is failed. Not used at the moment, but it's
* maybe timing relevant. Datasheet doesn't say anything about this.
* The programming guide say do it so.
*/
at86rf230_rx_read_frame(context);
}
static void
at86rf230_irq_trx_end(struct at86rf230_local *lp)
{
......@@ -891,6 +935,10 @@ at86rf230_start(struct ieee802154_hw *hw)
{
struct at86rf230_local *lp = hw->priv;
/* reset trac stats on start */
if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS))
memset(&lp->trac, 0, sizeof(struct at86rf230_trac));
at86rf230_awake(lp);
enable_irq(lp->spi->irq);
......@@ -1591,6 +1639,81 @@ at86rf230_setup_spi_messages(struct at86rf230_local *lp)
lp->tx.timer.function = at86rf230_async_state_timer;
}
#ifdef CONFIG_IEEE802154_AT86RF230_DEBUGFS
static struct dentry *at86rf230_debugfs_root;
static int at86rf230_stats_show(struct seq_file *file, void *offset)
{
struct at86rf230_local *lp = file->private;
int ret;
ret = seq_printf(file, "SUCCESS:\t\t%8llu\n", lp->trac.success);
if (ret < 0)
return ret;
ret = seq_printf(file, "SUCCESS_DATA_PENDING:\t%8llu\n",
lp->trac.success_data_pending);
if (ret < 0)
return ret;
ret = seq_printf(file, "SUCCESS_WAIT_FOR_ACK:\t%8llu\n",
lp->trac.success_wait_for_ack);
if (ret < 0)
return ret;
ret = seq_printf(file, "CHANNEL_ACCESS_FAILURE:\t%8llu\n",
lp->trac.channel_access_failure);
if (ret < 0)
return ret;
ret = seq_printf(file, "NO_ACK:\t\t\t%8llu\n", lp->trac.no_ack);
if (ret < 0)
return ret;
return seq_printf(file, "INVALID:\t\t%8llu\n", lp->trac.invalid);
}
static int at86rf230_stats_open(struct inode *inode, struct file *file)
{
return single_open(file, at86rf230_stats_show, inode->i_private);
}
static const struct file_operations at86rf230_stats_fops = {
.open = at86rf230_stats_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int at86rf230_debugfs_init(struct at86rf230_local *lp)
{
char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "at86rf230-";
struct dentry *stats;
strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN);
at86rf230_debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
if (!at86rf230_debugfs_root)
return -ENOMEM;
stats = debugfs_create_file("trac_stats", S_IRUGO,
at86rf230_debugfs_root, lp,
&at86rf230_stats_fops);
if (!stats)
return -ENOMEM;
return 0;
}
static void at86rf230_debugfs_remove(void)
{
debugfs_remove_recursive(at86rf230_debugfs_root);
}
#else
static int at86rf230_debugfs_init(struct at86rf230_local *lp) { return 0; }
static void at86rf230_debugfs_remove(void) { }
#endif
static int at86rf230_probe(struct spi_device *spi)
{
struct ieee802154_hw *hw;
......@@ -1686,12 +1809,18 @@ static int at86rf230_probe(struct spi_device *spi)
/* going into sleep by default */
at86rf230_sleep(lp);
rc = ieee802154_register_hw(lp->hw);
rc = at86rf230_debugfs_init(lp);
if (rc)
goto free_dev;
rc = ieee802154_register_hw(lp->hw);
if (rc)
goto free_debugfs;
return rc;
free_debugfs:
at86rf230_debugfs_remove();
free_dev:
ieee802154_free_hw(lp->hw);
......@@ -1706,6 +1835,7 @@ static int at86rf230_remove(struct spi_device *spi)
at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
ieee802154_unregister_hw(lp->hw);
ieee802154_free_hw(lp->hw);
at86rf230_debugfs_remove();
dev_dbg(&spi->dev, "unregistered at86rf230\n");
return 0;
......
......@@ -216,5 +216,13 @@
#define STATE_TRANSITION_IN_PROGRESS 0x1F
#define TRX_STATE_MASK (0x1F)
#define TRAC_MASK(x) ((x & 0xe0) >> 5)
#define TRAC_SUCCESS 0
#define TRAC_SUCCESS_DATA_PENDING 1
#define TRAC_SUCCESS_WAIT_FOR_ACK 2
#define TRAC_CHANNEL_ACCESS_FAILURE 3
#define TRAC_NO_ACK 5
#define TRAC_INVALID 7
#endif /* !_AT86RF230_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment