Skip to content

L
linux
Commit 49f2ec91 authored by Ralf Baechle's avatar Ralf Baechle
Browse files
Options

MIPS: Consolidate idle loop / WAIT instruction support in a single file. 

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 1a461c5b
Hide whitespace changes
Inline Side-by-side
Showing with 233 additions and 212 deletions
arch/mips/kernel/Makefile
View file @ 49f2ec91
......@@ -4,7 +4,7 @@
extra-y := head.o vmlinux.lds
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
obj-y += cpu-probe.o branch.o entry.o genex.o idle.o irq.o process.o \
prom.o ptrace.o reset.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o watch.o vdso.o
......
arch/mips/kernel/cpu-probe.c
View file @ 49f2ec91
......@@ -27,105 +27,6 @@
#include <asm/spram.h>
#include <asm/uaccess.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
* the implementation of the "wait" feature differs between CPU families. This
* points to the function that implements CPU specific wait.
* The wait instruction stops the pipeline and reduces the power consumption of
* the CPU very much.
*/
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);
static void r3081_wait(void)
{
unsigned long cfg = read_c0_conf();
write_c0_conf(cfg | R30XX_CONF_HALT);
}
static void r39xx_wait(void)
{
local_irq_disable();
if (!need_resched())
write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
local_irq_enable();
}
extern void r4k_wait(void);
/*
* This variant is preferable as it allows testing need_resched and going to
* sleep depending on the outcome atomically. Unfortunately the "It is
* implementation-dependent whether the pipeline restarts when a non-enabled
* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
* using this version a gamble.
*/
void r4k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
__asm__(" .set push \n"
" .set mips3 \n"
" wait \n"
" .set pop \n");
local_irq_enable();
__asm__(" .globl __pastwait \n"
"__pastwait: \n");
}
/*
* The RM7000 variant has to handle erratum 38. The workaround is to not
* have any pending stores when the WAIT instruction is executed.
*/
static void rm7k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
__asm__(
" .set push \n"
" .set mips3 \n"
" .set noat \n"
" mfc0 $1, $12 \n"
" sync \n"
" mtc0 $1, $12 # stalls until W stage \n"
" wait \n"
" mtc0 $1, $12 # stalls until W stage \n"
" .set pop \n");
local_irq_enable();
}
/*
* The Au1xxx wait is available only if using 32khz counter or
* external timer source, but specifically not CP0 Counter.
* alchemy/common/time.c may override cpu_wait!
*/
static void au1k_wait(void)
{
__asm__(" .set mips3 \n"
" cache 0x14, 0(%0) \n"
" cache 0x14, 32(%0) \n"
" sync \n"
" nop \n"
" wait \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
" .set mips0 \n"
: : "r" (au1k_wait));
}
static int __initdata nowait;
static int __init wait_disable(char *s)
{
nowait = 1;
return 1;
}
__setup("nowait", wait_disable);
static int __cpuinitdata mips_fpu_disabled;
static int __init fpu_disable(char *s)
......@@ -150,105 +51,6 @@ static int __init dsp_disable(char *s)
__setup("nodsp", dsp_disable);
void __init check_wait(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
if (nowait) {
printk("Wait instruction disabled.\n");
return;
}
switch (c->cputype) {
case CPU_R3081:
case CPU_R3081E:
cpu_wait = r3081_wait;
break;
case CPU_TX3927:
cpu_wait = r39xx_wait;
break;
case CPU_R4200:
/* case CPU_R4300: */
case CPU_R4600:
case CPU_R4640:
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
case CPU_R5500:
case CPU_NEVADA:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
case CPU_5KC:
case CPU_25KF:
case CPU_PR4450:
case CPU_BMIPS3300:
case CPU_BMIPS4350:
case CPU_BMIPS4380:
case CPU_BMIPS5000:
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
case CPU_JZRISC:
case CPU_LOONGSON1:
case CPU_XLR:
case CPU_XLP:
cpu_wait = r4k_wait;
break;
case CPU_RM7000:
cpu_wait = rm7k_wait_irqoff;
break;
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
cpu_wait = r4k_wait;
if (read_c0_config7() & MIPS_CONF7_WII)
cpu_wait = r4k_wait_irqoff;
break;
case CPU_74K:
cpu_wait = r4k_wait;
if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
cpu_wait = r4k_wait_irqoff;
break;
case CPU_TX49XX:
cpu_wait = r4k_wait_irqoff;
break;
case CPU_ALCHEMY:
cpu_wait = au1k_wait;
break;
case CPU_20KC:
/*
* WAIT on Rev1.0 has E1, E2, E3 and E16.
* WAIT on Rev2.0 and Rev3.0 has E16.
* Rev3.1 WAIT is nop, why bother
*/
if ((c->processor_id & 0xff) <= 0x64)
break;
/*
* Another rev is incremeting c0_count at a reduced clock
* rate while in WAIT mode. So we basically have the choice
* between using the cp0 timer as clocksource or avoiding
* the WAIT instruction. Until more details are known,
* disable the use of WAIT for 20Kc entirely.
cpu_wait = r4k_wait;
*/
break;
case CPU_RM9000:
if ((c->processor_id & 0x00ff) >= 0x40)
cpu_wait = r4k_wait;
break;
default:
break;
}
}
static inline void check_errata(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
......
arch/mips/kernel/idle.c 0 → 100644
View file @ 49f2ec91
/*
* MIPS idle loop and WAIT instruction support.
*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
* Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/export.h>
#include <linux/init.h>
#include <linux/irqflags.h>
#include <linux/printk.h>
#include <linux/sched.h>
#include <asm/cpu.h>
#include <asm/cpu-info.h>
#include <asm/mipsregs.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
* the implementation of the "wait" feature differs between CPU families. This
* points to the function that implements CPU specific wait.
* The wait instruction stops the pipeline and reduces the power consumption of
* the CPU very much.
*/
void (*cpu_wait)(void);
EXPORT_SYMBOL(cpu_wait);
static void r3081_wait(void)
{
unsigned long cfg = read_c0_conf();
write_c0_conf(cfg | R30XX_CONF_HALT);
}
static void r39xx_wait(void)
{
local_irq_disable();
if (!need_resched())
write_c0_conf(read_c0_conf() | TX39_CONF_HALT);
local_irq_enable();
}
extern void r4k_wait(void);
/*
* This variant is preferable as it allows testing need_resched and going to
* sleep depending on the outcome atomically. Unfortunately the "It is
* implementation-dependent whether the pipeline restarts when a non-enabled
* interrupt is requested" restriction in the MIPS32/MIPS64 architecture makes
* using this version a gamble.
*/
void r4k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
__asm__(" .set push \n"
" .set mips3 \n"
" wait \n"
" .set pop \n");
local_irq_enable();
__asm__(" .globl __pastwait \n"
"__pastwait: \n");
}
/*
* The RM7000 variant has to handle erratum 38. The workaround is to not
* have any pending stores when the WAIT instruction is executed.
*/
static void rm7k_wait_irqoff(void)
{
local_irq_disable();
if (!need_resched())
__asm__(
" .set push \n"
" .set mips3 \n"
" .set noat \n"
" mfc0 $1, $12 \n"
" sync \n"
" mtc0 $1, $12 # stalls until W stage \n"
" wait \n"
" mtc0 $1, $12 # stalls until W stage \n"
" .set pop \n");
local_irq_enable();
}
/*
* The Au1xxx wait is available only if using 32khz counter or
* external timer source, but specifically not CP0 Counter.
* alchemy/common/time.c may override cpu_wait!
*/
static void au1k_wait(void)
{
__asm__(" .set mips3 \n"
" cache 0x14, 0(%0) \n"
" cache 0x14, 32(%0) \n"
" sync \n"
" nop \n"
" wait \n"
" nop \n"
" nop \n"
" nop \n"
" nop \n"
" .set mips0 \n"
: : "r" (au1k_wait));
}
static int __initdata nowait;
static int __init wait_disable(char *s)
{
nowait = 1;
return 1;
}
__setup("nowait", wait_disable);
void __init check_wait(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
if (nowait) {
printk("Wait instruction disabled.\n");
return;
}
switch (c->cputype) {
case CPU_R3081:
case CPU_R3081E:
cpu_wait = r3081_wait;
break;
case CPU_TX3927:
cpu_wait = r39xx_wait;
break;
case CPU_R4200:
/* case CPU_R4300: */
case CPU_R4600:
case CPU_R4640:
case CPU_R4650:
case CPU_R4700:
case CPU_R5000:
case CPU_R5500:
case CPU_NEVADA:
case CPU_4KC:
case CPU_4KEC:
case CPU_4KSC:
case CPU_5KC:
case CPU_25KF:
case CPU_PR4450:
case CPU_BMIPS3300:
case CPU_BMIPS4350:
case CPU_BMIPS4380:
case CPU_BMIPS5000:
case CPU_CAVIUM_OCTEON:
case CPU_CAVIUM_OCTEON_PLUS:
case CPU_CAVIUM_OCTEON2:
case CPU_JZRISC:
case CPU_LOONGSON1:
case CPU_XLR:
case CPU_XLP:
cpu_wait = r4k_wait;
break;
case CPU_RM7000:
cpu_wait = rm7k_wait_irqoff;
break;
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
cpu_wait = r4k_wait;
if (read_c0_config7() & MIPS_CONF7_WII)
cpu_wait = r4k_wait_irqoff;
break;
case CPU_74K:
cpu_wait = r4k_wait;
if ((c->processor_id & 0xff) >= PRID_REV_ENCODE_332(2, 1, 0))
cpu_wait = r4k_wait_irqoff;
break;
case CPU_TX49XX:
cpu_wait = r4k_wait_irqoff;
break;
case CPU_ALCHEMY:
cpu_wait = au1k_wait;
break;
case CPU_20KC:
/*
* WAIT on Rev1.0 has E1, E2, E3 and E16.
* WAIT on Rev2.0 and Rev3.0 has E16.
* Rev3.1 WAIT is nop, why bother
*/
if ((c->processor_id & 0xff) <= 0x64)
break;
/*
* Another rev is incremeting c0_count at a reduced clock
* rate while in WAIT mode. So we basically have the choice
* between using the cp0 timer as clocksource or avoiding
* the WAIT instruction. Until more details are known,
* disable the use of WAIT for 20Kc entirely.
cpu_wait = r4k_wait;
*/
break;
case CPU_RM9000:
if ((c->processor_id & 0x00ff) >= 0x40)
cpu_wait = r4k_wait;
break;
default:
break;
}
}
void arch_cpu_idle(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
smtc_idle_loop_hook();
#endif
if (cpu_wait)
(*cpu_wait)();
else
local_irq_enable();
}
arch/mips/kernel/process.c
View file @ 49f2ec91
......@@ -51,19 +51,6 @@ void arch_cpu_idle_dead(void)
}
#endif
void arch_cpu_idle(void)
{
#ifdef CONFIG_MIPS_MT_SMTC
extern void smtc_idle_loop_hook(void);
smtc_idle_loop_hook();
#endif
if (cpu_wait)
(*cpu_wait)();
else
local_irq_enable();
}
asmlinkage void ret_from_fork(void);
asmlinkage void ret_from_kernel_thread(void);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7