mtd: nand: Make sure drivers not supporting SET/GET_FEATURES return -ENOTSUPP

A lot of drivers are providing their own ->cmdfunc(), and most of the
time this implementation does not support all possible NAND operations.
But since ->cmdfunc() cannot return an error code, the core has no way
to know that the operation it requested is not supported.

This is a problem we cannot address for all kind of operations with the
current design, but we can prevent these silent failures for the
GET/SET FEATURES operation by overloading the default
->onfi_{set,get}_features() methods with one returning -ENOTSUPP.
Reported-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Packham <Chris.Packham@alliedtelesis.co.nz>

drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c

@@ -392,6 +392,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 	b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
 	b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
 	b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+	b47n->nand_chip.onfi_set_features = nand_onfi_get_set_features_notsupp;
+	b47n->nand_chip.onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	nand_chip->chip_delay = 50;
 	b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;

drivers/mtd/nand/cafe_nand.c

@@ -654,6 +654,8 @@ static int cafe_nand_probe(struct pci_dev *pdev,
 	cafe->nand.read_buf = cafe_read_buf;
 	cafe->nand.write_buf = cafe_write_buf;
 	cafe->nand.select_chip = cafe_select_chip;
+	cafe->nand.onfi_set_features = nand_onfi_get_set_features_notsupp;
+	cafe->nand.onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	cafe->nand.chip_delay = 0;
 

drivers/mtd/nand/denali.c

@@ -1531,6 +1531,8 @@ int denali_init(struct denali_nand_info *denali)
 	chip->cmdfunc = denali_cmdfunc;
 	chip->read_byte = denali_read_byte;
 	chip->waitfunc = denali_waitfunc;
+	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	/*
 	 * scan for NAND devices attached to the controller

drivers/mtd/nand/docg4.c

@@ -1260,6 +1260,8 @@ static void __init init_mtd_structs(struct mtd_info *mtd)
 	nand->read_buf = docg4_read_buf;
 	nand->write_buf = docg4_write_buf16;
 	nand->erase = docg4_erase_block;
+	nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
 	nand->ecc.read_page = docg4_read_page;
 	nand->ecc.write_page = docg4_write_page;
 	nand->ecc.read_page_raw = docg4_read_page_raw;

drivers/mtd/nand/fsl_elbc_nand.c

@@ -775,6 +775,8 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 	chip->select_chip = fsl_elbc_select_chip;
 	chip->cmdfunc = fsl_elbc_cmdfunc;
 	chip->waitfunc = fsl_elbc_wait;
+	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;

drivers/mtd/nand/fsl_ifc_nand.c

@@ -831,6 +831,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	chip->select_chip = fsl_ifc_select_chip;
 	chip->cmdfunc = fsl_ifc_cmdfunc;
 	chip->waitfunc = fsl_ifc_wait;
+	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	chip->bbt_td = &bbt_main_descr;
 	chip->bbt_md = &bbt_mirror_descr;

drivers/mtd/nand/hisi504_nand.c

@@ -764,6 +764,8 @@ static int hisi_nfc_probe(struct platform_device *pdev)
 	chip->write_buf		= hisi_nfc_write_buf;
 	chip->read_buf		= hisi_nfc_read_buf;
 	chip->chip_delay	= HINFC504_CHIP_DELAY;
+	chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
 
 	hisi_nfc_host_init(host);
 

drivers/mtd/nand/mpc5121_nfc.c

@@ -708,6 +708,8 @@ static int mpc5121_nfc_probe(struct platform_device *op)
 	chip->read_buf = mpc5121_nfc_read_buf;
 	chip->write_buf = mpc5121_nfc_write_buf;
 	chip->select_chip = mpc5121_nfc_select_chip;
+	chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
 	chip->ecc.mode = NAND_ECC_SOFT;
 	chip->ecc.algo = NAND_ECC_HAMMING;

drivers/mtd/nand/nand_base.c

@@ -3420,6 +3420,25 @@ static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
+/**
+ * nand_onfi_get_set_features_notsupp - set/get features stub returning
+ *					-ENOTSUPP
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ *
+ * Should be used by NAND controller drivers that do not support the SET/GET
+ * FEATURES operations.
+ */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+				       struct nand_chip *chip, int addr,
+				       u8 *subfeature_param)
+{
+	return -ENOTSUPP;
+}
+EXPORT_SYMBOL(nand_onfi_get_set_features_notsupp);
+
 /**
  * nand_suspend - [MTD Interface] Suspend the NAND flash
  * @mtd: MTD device structure

drivers/mtd/nand/pxa3xx_nand.c

@@ -1812,6 +1812,8 @@ static int alloc_nand_resource(struct platform_device *pdev)
 		chip->write_buf		= pxa3xx_nand_write_buf;
 		chip->options		|= NAND_NO_SUBPAGE_WRITE;
 		chip->cmdfunc		= nand_cmdfunc;
+		chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
+		chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
 	}
 
 	nand_hw_control_init(chip->controller);

drivers/mtd/nand/qcom_nandc.c

@@ -2008,6 +2008,8 @@ static int qcom_nand_host_init(struct qcom_nand_controller *nandc,
 	chip->read_byte		= qcom_nandc_read_byte;
 	chip->read_buf		= qcom_nandc_read_buf;
 	chip->write_buf		= qcom_nandc_write_buf;
+	chip->onfi_set_features	= nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features	= nand_onfi_get_set_features_notsupp;
 
 	/*
 	 * the bad block marker is readable only when we read the last codeword

drivers/mtd/nand/sh_flctl.c

@@ -1183,6 +1183,8 @@ static int flctl_probe(struct platform_device *pdev)
 	nand->read_buf = flctl_read_buf;
 	nand->select_chip = flctl_select_chip;
 	nand->cmdfunc = flctl_cmdfunc;
+	nand->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	nand->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	if (pdata->flcmncr_val & SEL_16BIT)
 		nand->options |= NAND_BUSWIDTH_16;

drivers/mtd/nand/vf610_nfc.c

@@ -703,6 +703,8 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 	chip->read_buf = vf610_nfc_read_buf;
 	chip->write_buf = vf610_nfc_write_buf;
 	chip->select_chip = vf610_nfc_select_chip;
+	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 

drivers/staging/mt29f_spinand/mt29f_spinand.c

@@ -915,6 +915,8 @@ static int spinand_probe(struct spi_device *spi_nand)
 	chip->waitfunc	= spinand_wait;
 	chip->options	|= NAND_CACHEPRG;
 	chip->select_chip = spinand_select_chip;
+	chip->onfi_set_features = nand_onfi_get_set_features_notsupp;
+	chip->onfi_get_features = nand_onfi_get_set_features_notsupp;
 
 	mtd = nand_to_mtd(chip);
 

include/linux/mtd/nand.h

@@ -1259,6 +1259,11 @@ int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
 int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
 			   int page);
 
+/* Stub used by drivers that do not support GET/SET FEATURES operations */
+int nand_onfi_get_set_features_notsupp(struct mtd_info *mtd,
+				       struct nand_chip *chip, int addr,
+				       u8 *subfeature_param);
+
 /* Default read_page_raw implementation */
 int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 		       uint8_t *buf, int oob_required, int page);