Commit 4a89852c authored by Frans Pop's avatar Frans Pop Committed by John W. Linville

wireless/prism54: remove trailing space in messages

Signed-off-by: default avatarFrans Pop <elendil@planet.nl>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 55f98938
......@@ -38,7 +38,7 @@ static void p54_dump_tx_queue(struct p54_common *priv)
u32 largest_hole = 0, free;
spin_lock_irqsave(&priv->tx_queue.lock, flags);
printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) --- \n",
printk(KERN_DEBUG "%s: / --- tx queue dump (%d entries) ---\n",
wiphy_name(priv->hw->wiphy), skb_queue_len(&priv->tx_queue));
prev_addr = priv->rx_start;
......
......@@ -227,14 +227,14 @@ islpci_interrupt(int irq, void *config)
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS,
"IRQ: Identification register 0x%p 0x%x \n", device, reg);
"IRQ: Identification register 0x%p 0x%x\n", device, reg);
#endif
/* check for each bit in the register separately */
if (reg & ISL38XX_INT_IDENT_UPDATE) {
#if VERBOSE > SHOW_ERROR_MESSAGES
/* Queue has been updated */
DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
DEBUG(SHOW_TRACING, "IRQ: Update flag\n");
DEBUG(SHOW_QUEUE_INDEXES,
"CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
......@@ -300,7 +300,7 @@ islpci_interrupt(int irq, void *config)
ISL38XX_CB_RX_DATA_LQ) != 0) {
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"Received frame in Data Low Queue \n");
"Received frame in Data Low Queue\n");
#endif
islpci_eth_receive(priv);
}
......@@ -325,7 +325,7 @@ islpci_interrupt(int irq, void *config)
/* Device has been initialized */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING,
"IRQ: Init flag, device initialized \n");
"IRQ: Init flag, device initialized\n");
#endif
wake_up(&priv->reset_done);
}
......@@ -333,7 +333,7 @@ islpci_interrupt(int irq, void *config)
if (reg & ISL38XX_INT_IDENT_SLEEP) {
/* Device intends to move to powersave state */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
DEBUG(SHOW_TRACING, "IRQ: Sleep flag\n");
#endif
isl38xx_handle_sleep_request(priv->control_block,
&powerstate,
......@@ -343,7 +343,7 @@ islpci_interrupt(int irq, void *config)
if (reg & ISL38XX_INT_IDENT_WAKEUP) {
/* Device has been woken up to active state */
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
DEBUG(SHOW_TRACING, "IRQ: Wakeup flag\n");
#endif
isl38xx_handle_wakeup(priv->control_block,
......@@ -634,7 +634,7 @@ islpci_alloc_memory(islpci_private *priv)
ioremap(pci_resource_start(priv->pdev, 0),
ISL38XX_PCI_MEM_SIZE))) {
/* error in remapping the PCI device memory address range */
printk(KERN_ERR "PCI memory remapping failed \n");
printk(KERN_ERR "PCI memory remapping failed\n");
return -1;
}
......@@ -901,7 +901,7 @@ islpci_setup(struct pci_dev *pdev)
if (register_netdev(ndev)) {
DEBUG(SHOW_ERROR_MESSAGES,
"ERROR: register_netdev() failed \n");
"ERROR: register_netdev() failed\n");
goto do_islpci_free_memory;
}
......
......@@ -89,7 +89,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit\n");
#endif
/* lock the driver code */
......@@ -140,7 +140,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
}
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
DEBUG(SHOW_TRACING, "memmove %p %p %i\n", skb->data,
src, skb->len);
#endif
} else {
......@@ -319,7 +319,7 @@ islpci_eth_receive(islpci_private *priv)
int discard = 0;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive\n");
#endif
/* the device has written an Ethernet frame in the data area
......@@ -431,7 +431,7 @@ islpci_eth_receive(islpci_private *priv)
skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
if (unlikely(skb == NULL)) {
/* error allocating an sk_buff structure elements */
DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb\n");
break;
}
skb_reserve(skb, (4 - (long) skb->data) & 0x03);
......
......@@ -113,7 +113,7 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill\n");
#endif
while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
......@@ -211,7 +211,7 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
{
pimfor_header_t *h = buf.mem;
DEBUG(SHOW_PIMFOR_FRAMES,
"PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
"PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x\n",
h->operation, oid, h->device_id, h->flags, length);
/* display the buffer contents for debugging */
......@@ -279,7 +279,7 @@ islpci_mgt_receive(struct net_device *ndev)
u32 curr_frag;
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive\n");
#endif
/* Only once per interrupt, determine fragment range to
......@@ -338,7 +338,7 @@ islpci_mgt_receive(struct net_device *ndev)
#if VERBOSE > SHOW_ERROR_MESSAGES
DEBUG(SHOW_PIMFOR_FRAMES,
"PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
"PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x\n",
header->operation, header->oid, header->device_id,
header->flags, header->length);
......
......@@ -819,7 +819,7 @@ mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
for (i = 0; i < list->nr; i++)
k += snprintf(str + k, PRIV_STR_SIZE - k,
"bss[%u] : \nage=%u\nchannel=%u\n"
"bss[%u] :\nage=%u\nchannel=%u\n"
"capinfo=0x%X\nrates=0x%X\n"
"basic_rates=0x%X\n",
i, list->bsslist[i].age,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment