iio: adf4350: Convert to use GPIO descriptor

The lock detect GPIO line is better to grab using
a GPIO descriptor. We drop the pdata for this: clients using board
files can use machine descriptor tables to pass this GPIO from
static data.

Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/frequency/adf4350.c

@@ -14,11 +14,10 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/gcd.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <asm/div64.h>
 #include <linux/clk.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
@@ -34,6 +33,7 @@ enum {
 struct adf4350_state {
 	struct spi_device		*spi;
 	struct regulator		*reg;
+	struct gpio_desc		*lock_detect_gpiod;
 	struct adf4350_platform_data	*pdata;
 	struct clk			*clk;
 	unsigned long			clkin;
@@ -61,7 +61,6 @@ static struct adf4350_platform_data default_pdata = {
 	.r3_user_settings = ADF4350_REG3_12BIT_CLKDIV_MODE(0),
 	.r4_user_settings = ADF4350_REG4_OUTPUT_PWR(3) |
 			    ADF4350_REG4_MUTE_TILL_LOCK_EN,
-	.gpio_lock_detect = -1,
 };
 
 static int adf4350_sync_config(struct adf4350_state *st)
@@ -317,8 +316,8 @@ static ssize_t adf4350_read(struct iio_dev *indio_dev,
 			(u64)st->fpfd;
 		do_div(val, st->r1_mod * (1 << st->r4_rf_div_sel));
 		/* PLL unlocked? return error */
-		if (gpio_is_valid(st->pdata->gpio_lock_detect))
-			if (!gpio_get_value(st->pdata->gpio_lock_detect)) {
+		if (st->lock_detect_gpiod)
+			if (!gpiod_get_value(st->lock_detect_gpiod)) {
 				dev_dbg(&st->spi->dev, "PLL un-locked\n");
 				ret = -EBUSY;
 			}
@@ -381,7 +380,6 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
 	struct device_node *np = dev->of_node;
 	struct adf4350_platform_data *pdata;
 	unsigned int tmp;
-	int ret;
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -401,12 +399,6 @@ static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
 	of_property_read_u32(np, "adi,reference-div-factor", &tmp);
 	pdata->ref_div_factor = tmp;
 
-	ret = of_get_gpio(np, 0);
-	if (ret < 0)
-		pdata->gpio_lock_detect = -1;
-	else
-		pdata->gpio_lock_detect = ret;
-
 	pdata->ref_doubler_en = of_property_read_bool(np,
 			"adi,reference-doubler-enable");
 	pdata->ref_div2_en = of_property_read_bool(np,
@@ -561,16 +553,10 @@ static int adf4350_probe(struct spi_device *spi)
 
 	memset(st->regs_hw, 0xFF, sizeof(st->regs_hw));
 
-	if (gpio_is_valid(pdata->gpio_lock_detect)) {
-		ret = devm_gpio_request(&spi->dev, pdata->gpio_lock_detect,
-					indio_dev->name);
-		if (ret) {
-			dev_err(&spi->dev, "fail to request lock detect GPIO-%d",
-				pdata->gpio_lock_detect);
-			goto error_disable_reg;
-		}
-		gpio_direction_input(pdata->gpio_lock_detect);
-	}
+	st->lock_detect_gpiod = devm_gpiod_get_optional(&spi->dev, NULL,
+							GPIOD_IN);
+	if (IS_ERR(st->lock_detect_gpiod))
+		return PTR_ERR(st->lock_detect_gpiod);
 
 	if (pdata->power_up_frequency) {
 		ret = adf4350_set_freq(st, pdata->power_up_frequency);

include/linux/iio/frequency/adf4350.h

@@ -103,9 +103,6 @@
  * @r2_user_settings:	User defined settings for ADF4350/1 REGISTER_2.
  * @r3_user_settings:	User defined settings for ADF4350/1 REGISTER_3.
  * @r4_user_settings:	User defined settings for ADF4350/1 REGISTER_4.
- * @gpio_lock_detect:	Optional, if set with a valid GPIO number,
- *			pll lock state is tested upon read.
- *			If not used - set to -1.
  */
 
 struct adf4350_platform_data {
@@ -121,7 +118,6 @@ struct adf4350_platform_data {
 	unsigned		r2_user_settings;
 	unsigned		r3_user_settings;
 	unsigned		r4_user_settings;
-	int			gpio_lock_detect;
 };
 
 #endif /* IIO_PLL_ADF4350_H_ */