Commit 4ac37208 authored by Simon Arlott's avatar Simon Arlott Committed by Greg Kroah-Hartman

USB: cxacru: add write-only sysfs attribute for modem configuration

The modem can be configured using CM_REQUEST_CARD_DATA_SET,
although CM_REQUEST_CARD_DATA_GET does not return any data.

Tested by setting the modulation (0x0a) option.

There is a list of parameters in the following archive,
but the meaning of many of them is not well documented:
  http://sourceforge.net/project/shownotes.php?release_id=301825

This source also indicates that the highest parameter set
is 0x4a but this varies by model so an arbitrary limit of
0x7f has been used (the index is a 32-bit integer).
Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 885582c4
......@@ -15,6 +15,15 @@ several sysfs attribute files for retrieving device statistics:
* adsl_headend_environment
Information about the remote headend.
* adsl_config
Configuration writing interface.
Write parameters in hexadecimal format <index>=<value>,
separated by whitespace, e.g.:
"1=0 a=5"
Up to 7 parameters at a time will be sent and the modem will restart
the ADSL connection when any value is set. These are logged for future
reference.
* downstream_attenuation (dB)
* downstream_bits_per_frame
* downstream_rate (kbps)
......
......@@ -52,6 +52,7 @@ static const char cxacru_driver_name[] = "cxacru";
#define CXACRU_EP_DATA 0x02 /* Bulk in/out */
#define CMD_PACKET_SIZE 64 /* Should be maxpacket(ep)? */
#define CMD_MAX_CONFIG ((CMD_PACKET_SIZE / 4 - 1) / 2)
/* Addresses */
#define PLLFCLK_ADDR 0x00350068
......@@ -216,6 +217,10 @@ static DEVICE_ATTR(_name, S_IRUGO, cxacru_sysfs_show_##_name, NULL)
static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, \
cxacru_sysfs_show_##_name, cxacru_sysfs_store_##_name)
#define CXACRU_SET_INIT(_name) \
static DEVICE_ATTR(_name, S_IWUSR, \
NULL, cxacru_sysfs_store_##_name)
#define CXACRU_ATTR_INIT(_value, _type, _name) \
static ssize_t cxacru_sysfs_show_##_name(struct device *dev, \
struct device_attribute *attr, char *buf) \
......@@ -232,10 +237,12 @@ CXACRU__ATTR_INIT(_name)
#define CXACRU_ATTR_CREATE(_v, _t, _name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU_CMD_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU_SET_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU__ATTR_CREATE(_name) CXACRU_DEVICE_CREATE_FILE(_name)
#define CXACRU_ATTR_REMOVE(_v, _t, _name) CXACRU_DEVICE_REMOVE_FILE(_name)
#define CXACRU_CMD_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
#define CXACRU_SET_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
#define CXACRU__ATTR_REMOVE(_name) CXACRU_DEVICE_REMOVE_FILE(_name)
static ssize_t cxacru_sysfs_showattr_u32(u32 value, char *buf)
......@@ -438,6 +445,72 @@ static ssize_t cxacru_sysfs_store_adsl_state(struct device *dev,
return ret;
}
/* CM_REQUEST_CARD_DATA_GET times out, so no show attribute */
static ssize_t cxacru_sysfs_store_adsl_config(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct cxacru_data *instance = to_usbatm_driver_data(
to_usb_interface(dev));
int len = strlen(buf);
int ret, pos, num;
__le32 data[CMD_PACKET_SIZE / 4];
if (!capable(CAP_NET_ADMIN))
return -EACCES;
if (instance == NULL)
return -ENODEV;
pos = 0;
num = 0;
while (pos < len) {
int tmp;
u32 index;
u32 value;
ret = sscanf(buf + pos, "%x=%x%n", &index, &value, &tmp);
if (ret < 2)
return -EINVAL;
if (index < 0 || index > 0x7f)
return -EINVAL;
pos += tmp;
/* skip trailing newline */
if (buf[pos] == '\n' && pos == len-1)
pos++;
data[num * 2 + 1] = cpu_to_le32(index);
data[num * 2 + 2] = cpu_to_le32(value);
num++;
/* send config values when data buffer is full
* or no more data
*/
if (pos >= len || num >= CMD_MAX_CONFIG) {
char log[CMD_MAX_CONFIG * 12 + 1]; /* %02x=%08x */
data[0] = cpu_to_le32(num);
ret = cxacru_cm(instance, CM_REQUEST_CARD_DATA_SET,
(u8 *) data, 4 + num * 8, NULL, 0);
if (ret < 0) {
atm_err(instance->usbatm,
"set card data returned %d\n", ret);
return -EIO;
}
for (tmp = 0; tmp < num; tmp++)
snprintf(log + tmp*12, 13, " %02x=%08x",
le32_to_cpu(data[tmp * 2 + 1]),
le32_to_cpu(data[tmp * 2 + 2]));
atm_info(instance->usbatm, "config%s\n", log);
num = 0;
}
}
return len;
}
/*
* All device attributes are included in CXACRU_ALL_FILES
* so that the same list can be used multiple times:
......@@ -473,7 +546,8 @@ CXACRU_ATTR_##_action(CXINF_MODULATION, MODU, modulation); \
CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND, u32, adsl_headend); \
CXACRU_ATTR_##_action(CXINF_ADSL_HEADEND_ENVIRONMENT, u32, adsl_headend_environment); \
CXACRU_ATTR_##_action(CXINF_CONTROLLER_VERSION, u32, adsl_controller_version); \
CXACRU_CMD_##_action( adsl_state);
CXACRU_CMD_##_action( adsl_state); \
CXACRU_SET_##_action( adsl_config);
CXACRU_ALL_FILES(INIT);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment