Merge series "ASoC: rt286/rt298: Fixes for DMIC2 config and combo jack" from...

Merge series "ASoC: rt286/rt298: Fixes for DMIC2 config and combo jack" from David Ward <david.ward@gatech.edu>:

The last two patches in this series fix a longstanding issue that prevented
the ALC3263 codec from using a headset mic. This codec can be found on Dell
systems including the Latitude 13 7350, Venue 11 Pro 7140, and XPS 13 9343.
In fact, there is an ACPI quirk for the XPS 13 9343, which forces it to use
legacy HD Audio just to avoid this issue:

https://lore.kernel.org/alsa-devel/CAPeXnHv07HkvcHrYFmZMr8OTp7U7F=k_k=LPYnUtp89iPn2d2Q@mail.gmail.com/

This may allow that ACPI quirk to be removed. Either way, the other systems
mentioned above do not support this quirk and already use the ASoC driver,
so this fix is necessary for headset mic support on those systems.

Note: there is likely other handling for this codec that only exists in the
HDA driver, but which also belongs in the ASoC driver. Commit 394c97f8
("ALSA: hda/realtek - Change EAPD to verb control") describes an issue that
does not seem to be resolved in the ASoC driver, to give an example.

Other patches in this series are not specific to the ALC3263. These patches
set the correct combo jack configuration when headphones are inserted, and
fix a misaligned value set in the DMIC2 Configuration Default register.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961Signed-off-by: David Ward <david.ward@gatech.edu>

David Ward (5):
  ASoC: rt286: Fix upper byte in DMIC2 configuration
  ASoC: rt286: Configure combo jack for headphones
  ASoC: rt298: Configure combo jack for headphones
  ASoC: rt286: Make RT286_SET_GPIO_* readable and writable
  ASoC: rt286: Generalize support for ALC3263 codec

 sound/soc/codecs/rt286.c | 34 +++++++++++++++++++++-------------
 sound/soc/codecs/rt298.c |  9 +++++++--
 2 files changed, 28 insertions(+), 15 deletions(-)

--
2.31.1

sound/soc/codecs/rt286.c

@@ -171,6 +171,9 @@ static bool rt286_readable_register(struct device *dev, unsigned int reg)
 	case RT286_PROC_COEF:
 	case RT286_SET_AMP_GAIN_ADC_IN1:
 	case RT286_SET_AMP_GAIN_ADC_IN2:
+	case RT286_SET_GPIO_MASK:
+	case RT286_SET_GPIO_DIRECTION:
+	case RT286_SET_GPIO_DATA:
 	case RT286_SET_POWER(RT286_DAC_OUT1):
 	case RT286_SET_POWER(RT286_DAC_OUT2):
 	case RT286_SET_POWER(RT286_ADC_IN1):
@@ -252,11 +255,16 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic)
 				msleep(300);
 				regmap_read(rt286->regmap,
 					RT286_CBJ_CTRL2, &val);
-				if (0x0070 == (val & 0x0070))
+				if (0x0070 == (val & 0x0070)) {
 					*mic = true;
-				else
+				} else {
 					*mic = false;
+					regmap_update_bits(rt286->regmap,
+						RT286_CBJ_CTRL1,
+						0xfcc0, 0xc400);
+				}
 			}
+
 			regmap_update_bits(rt286->regmap,
 				RT286_DC_GAIN, 0x200, 0x0);
 
@@ -1117,12 +1125,11 @@ static const struct dmi_system_id force_combo_jack_table[] = {
 	{ }
 };
 
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
 	{
-		.ident = "Dell Dino",
+		.ident = "Dell",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
 		}
 	},
 	{ }
@@ -1133,7 +1140,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 {
 	struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct rt286_priv *rt286;
-	int i, ret, val;
+	int i, ret, vendor_id;
 
 	rt286 = devm_kzalloc(&i2c->dev,	sizeof(*rt286),
 				GFP_KERNEL);
@@ -1149,14 +1156,15 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	}
 
 	ret = regmap_read(rt286->regmap,
-		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "I2C error %d\n", ret);
 		return ret;
 	}
-	if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+	if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
 		dev_err(&i2c->dev,
-			"Device with ID register %#x is not rt286\n", val);
+			"Device with ID register %#x is not rt286\n",
+			vendor_id);
 		return -ENODEV;
 	}
 
@@ -1180,8 +1188,8 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	if (pdata)
 		rt286->pdata = *pdata;
 
-	if (dmi_check_system(force_combo_jack_table) ||
-		dmi_check_system(dmi_dell_dino))
+	if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+		dmi_check_system(force_combo_jack_table))
 		rt286->pdata.cbj_en = true;
 
 	regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1204,7 +1212,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	mdelay(10);
 
 	if (!rt286->pdata.gpio2_en)
-		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0x4000);
+		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0x40);
 	else
 		regmap_write(rt286->regmap, RT286_SET_DMIC2_DEFAULT, 0);
 
@@ -1220,7 +1228,7 @@ static int rt286_i2c_probe(struct i2c_client *i2c,
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
 
-	if (dmi_check_system(dmi_dell_dino)) {
+	if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
 		regmap_update_bits(rt286->regmap,
 			RT286_SET_GPIO_MASK, 0x40, 0x40);
 		regmap_update_bits(rt286->regmap,

sound/soc/codecs/rt298.c

@@ -267,11 +267,16 @@ static int rt298_jack_detect(struct rt298_priv *rt298, bool *hp, bool *mic)
 				msleep(300);
 				regmap_read(rt298->regmap,
 					RT298_CBJ_CTRL2, &val);
-				if (0x0070 == (val & 0x0070))
+				if (0x0070 == (val & 0x0070)) {
 					*mic = true;
-				else
+				} else {
 					*mic = false;
+					regmap_update_bits(rt298->regmap,
+						RT298_CBJ_CTRL1,
+						0xfcc0, 0xc400);
+				}
 			}
+
 			regmap_update_bits(rt298->regmap,
 				RT298_DC_GAIN, 0x200, 0x0);