Commit 4b30b6f2 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  MAINTAINERS: add maintainer of CSR SiRFprimaII machine
  ARM: CSR: initializing L2 cache
  ARM: CSR: mapping early DEBUG_LL uart
  ARM: CSR: Adding CSR SiRFprimaII board support
  OMAP4: clocks: Update the clock tree with 4460 clock nodes
  OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts
  OMAP4: ID: add omap_has_feature for max freq supported
  OMAP: ID: introduce chip detection for OMAP4460
  ARM: Xilinx: merge board file into main platform code
  ARM: Xilinx: Adding Xilinx board support

Fix up conflicts in arch/arm/mach-omap2/cm-regbits-44xx.h
parents 38da590b 6c59c115
prima2 "cb" evalutation board
Required root node properties:
- compatible = "sirf,prima2-cb", "sirf,prima2";
Xilinx Zynq EP107 Emulation Platform board
This board is an emulation platform for the Zynq product which is
based on an ARM Cortex A9 processor.
Required root node properties:
- compatible = "xlnx,zynq-ep107";
......@@ -734,6 +734,12 @@ T: git git://git.berlios.de/gemini-board
S: Maintained
F: arch/arm/mach-gemini/
ARM/CSR SIRFPRIMA2 MACHINE SUPPORT
M: Barry Song <baohua.song@csr.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-prima2/
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
......@@ -340,6 +340,19 @@ config ARCH_GEMINI
help
Support for the Cortina Systems Gemini family SoCs
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
select CPU_V7
select GENERIC_TIME
select NO_IOPORT
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select USE_OF
select ZONE_DMA
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
......@@ -884,6 +897,19 @@ config ARCH_VT8500
select HAVE_PWM
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform"
select CPU_V7
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select CLKDEV_LOOKUP
select ARM_GIC
select ARM_AMBA
select ICST
select USE_OF
help
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice
#
......
......@@ -168,6 +168,7 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2
machine-$(CONFIG_ARCH_OMAP4) := omap2
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_PRIMA2) := prima2
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_RPC) := rpc
......@@ -194,6 +195,7 @@ machine-$(CONFIG_MACH_SPEAR300) := spear3xx
machine-$(CONFIG_MACH_SPEAR310) := spear3xx
machine-$(CONFIG_MACH_SPEAR320) := spear3xx
machine-$(CONFIG_MACH_SPEAR600) := spear6xx
machine-$(CONFIG_ARCH_ZYNQ) := zynq
# Platform directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
......@@ -201,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_ARCH_ZYNQ) := versatile
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
......
/dts-v1/;
/ {
model = "SiRF Prima2 eVB";
compatible = "sirf,prima2-cb", "sirf,prima2";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
memory {
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1";
linux,stdout-path = &uart1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <32768>;
i-cache-size = <32768>;
/* from bootloader */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
axi {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x40000000 0x40000000 0x80000000>;
l2-cache-controller@80040000 {
compatible = "arm,pl310-cache";
reg = <0x80040000 0x1000>;
interrupts = <59>;
};
intc: interrupt-controller@80020000 {
#interrupt-cells = <1>;
interrupt-controller;
compatible = "sirf,prima2-intc";
reg = <0x80020000 0x1000>;
};
sys-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x88000000 0x88000000 0x40000>;
clock-controller@88000000 {
compatible = "sirf,prima2-clkc";
reg = <0x88000000 0x1000>;
interrupts = <3>;
};
reset-controller@88010000 {
compatible = "sirf,prima2-rstc";
reg = <0x88010000 0x1000>;
};
};
mem-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90000000 0x90000000 0x10000>;
memory-controller@90000000 {
compatible = "sirf,prima2-memc";
reg = <0x90000000 0x10000>;
interrupts = <27>;
};
};
disp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x90010000 0x90010000 0x30000>;
display@90010000 {
compatible = "sirf,prima2-lcd";
reg = <0x90010000 0x20000>;
interrupts = <30>;
};
vpp@90020000 {
compatible = "sirf,prima2-vpp";
reg = <0x90020000 0x10000>;
interrupts = <31>;
};
};
graphics-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x98000000 0x98000000 0x8000000>;
graphics@98000000 {
compatible = "powervr,sgx531";
reg = <0x98000000 0x8000000>;
interrupts = <6>;
};
};
multimedia-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa0000000 0xa0000000 0x8000000>;
multimedia@a0000000 {
compatible = "sirf,prima2-video-codec";
reg = <0xa0000000 0x8000000>;
interrupts = <5>;
};
};
dsp-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xa8000000 0xa8000000 0x2000000>;
dspif@a8000000 {
compatible = "sirf,prima2-dspif";
reg = <0xa8000000 0x10000>;
interrupts = <9>;
};
gps@a8010000 {
compatible = "sirf,prima2-gps";
reg = <0xa8010000 0x10000>;
interrupts = <7>;
};
dsp@a9000000 {
compatible = "sirf,prima2-dsp";
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
};
};
peri-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0xb0000000 0x180000>;
timer@b0020000 {
compatible = "sirf,prima2-tick";
reg = <0xb0020000 0x1000>;
interrupts = <0>;
};
nand@b0030000 {
compatible = "sirf,prima2-nand";
reg = <0xb0030000 0x10000>;
interrupts = <41>;
};
audio@b0040000 {
compatible = "sirf,prima2-audio";
reg = <0xb0040000 0x10000>;
interrupts = <35>;
};
uart0: uart@b0050000 {
cell-index = <0>;
compatible = "sirf,prima2-uart";
reg = <0xb0050000 0x10000>;
interrupts = <17>;
};
uart1: uart@b0060000 {
cell-index = <1>;
compatible = "sirf,prima2-uart";
reg = <0xb0060000 0x10000>;
interrupts = <18>;
};
uart2: uart@b0070000 {
cell-index = <2>;
compatible = "sirf,prima2-uart";
reg = <0xb0070000 0x10000>;
interrupts = <19>;
};
usp0: usp@b0080000 {
cell-index = <0>;
compatible = "sirf,prima2-usp";
reg = <0xb0080000 0x10000>;
interrupts = <20>;
};
usp1: usp@b0090000 {
cell-index = <1>;
compatible = "sirf,prima2-usp";
reg = <0xb0090000 0x10000>;
interrupts = <21>;
};
usp2: usp@b00a0000 {
cell-index = <2>;
compatible = "sirf,prima2-usp";
reg = <0xb00a0000 0x10000>;
interrupts = <22>;
};
dmac0: dma-controller@b00b0000 {
cell-index = <0>;
compatible = "sirf,prima2-dmac";
reg = <0xb00b0000 0x10000>;
interrupts = <12>;
};
dmac1: dma-controller@b0160000 {
cell-index = <1>;
compatible = "sirf,prima2-dmac";
reg = <0xb0160000 0x10000>;
interrupts = <13>;
};
vip@b00C0000 {
compatible = "sirf,prima2-vip";
reg = <0xb00C0000 0x10000>;
};
spi0: spi@b00d0000 {
cell-index = <0>;
compatible = "sirf,prima2-spi";
reg = <0xb00d0000 0x10000>;
interrupts = <15>;
};
spi1: spi@b0170000 {
cell-index = <1>;
compatible = "sirf,prima2-spi";
reg = <0xb0170000 0x10000>;
interrupts = <16>;
};
i2c0: i2c@b00e0000 {
cell-index = <0>;
compatible = "sirf,prima2-i2c";
reg = <0xb00e0000 0x10000>;
interrupts = <24>;
};
i2c1: i2c@b00f0000 {
cell-index = <1>;
compatible = "sirf,prima2-i2c";
reg = <0xb00f0000 0x10000>;
interrupts = <25>;
};
tsc@b0110000 {
compatible = "sirf,prima2-tsc";
reg = <0xb0110000 0x10000>;
interrupts = <33>;
};
gpio: gpio-controller@b0120000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,prima2-gpio";
reg = <0xb0120000 0x10000>;
gpio-controller;
interrupt-controller;
};
pwm@b0130000 {
compatible = "sirf,prima2-pwm";
reg = <0xb0130000 0x10000>;
};
efusesys@b0140000 {
compatible = "sirf,prima2-efuse";
reg = <0xb0140000 0x10000>;
};
pulsec@b0150000 {
compatible = "sirf,prima2-pulsec";
reg = <0xb0150000 0x10000>;
interrupts = <48>;
};
pci-iobg {
compatible = "sirf,prima2-pciiobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x56000000 0x56000000 0x1b00000>;
sd0: sdhci@56000000 {
cell-index = <0>;
compatible = "sirf,prima2-sdhc";
reg = <0x56000000 0x100000>;
interrupts = <38>;
};
sd1: sdhci@56100000 {
cell-index = <1>;
compatible = "sirf,prima2-sdhc";
reg = <0x56100000 0x100000>;
interrupts = <38>;
};
sd2: sdhci@56200000 {
cell-index = <2>;
compatible = "sirf,prima2-sdhc";
reg = <0x56200000 0x100000>;
interrupts = <23>;
};
sd3: sdhci@56300000 {
cell-index = <3>;
compatible = "sirf,prima2-sdhc";
reg = <0x56300000 0x100000>;
interrupts = <23>;
};
sd4: sdhci@56400000 {
cell-index = <4>;
compatible = "sirf,prima2-sdhc";
reg = <0x56400000 0x100000>;
interrupts = <39>;
};
sd5: sdhci@56500000 {
cell-index = <5>;
compatible = "sirf,prima2-sdhc";
reg = <0x56500000 0x100000>;
interrupts = <39>;
};
pci-copy@57900000 {
compatible = "sirf,prima2-pcicp";
reg = <0x57900000 0x100000>;
interrupts = <40>;
};
rom-interface@57a00000 {
compatible = "sirf,prima2-romif";
reg = <0x57a00000 0x100000>;
};
};
};
rtc-iobg {
compatible = "sirf,prima2-rtciobg", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x80030000 0x10000>;
gpsrtc@1000 {
compatible = "sirf,prima2-gpsrtc";
reg = <0x1000 0x1000>;
interrupts = <55 56 57>;
};
sysrtc@2000 {
compatible = "sirf,prima2-sysrtc";
reg = <0x2000 0x1000>;
interrupts = <52 53 54>;
};
pwrc@3000 {
compatible = "sirf,prima2-pwrc";
reg = <0x3000 0x1000>;
interrupts = <32>;
};
};
uus-iobg {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb8000000 0xb8000000 0x40000>;
usb0: usb@b00e0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8000000 0x10000>;
interrupts = <10>;
};
usb1: usb@b00f0000 {
compatible = "chipidea,ci13611a-prima2";
reg = <0xb8010000 0x10000>;
interrupts = <11>;
};
sata@b00f0000 {
compatible = "synopsys,dwc-ahsata";
reg = <0xb8020000 0x10000>;
interrupts = <37>;
};
security@b00f0000 {
compatible = "sirf,prima2-security";
reg = <0xb8030000 0x10000>;
interrupts = <42>;
};
};
};
};
/*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/ {
model = "Xilinx Zynq EP107";
compatible = "xlnx,zynq-ep107";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
memory {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
linux,stdout-path = &uart0;
};
amba {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller@f8f01000 {
interrupt-controller;
compatible = "arm,gic";
reg = <0xF8F01000 0x1000>;
#interrupt-cells = <2>;
};
uart0: uart@e0000000 {
compatible = "xlnx,xuartps";
reg = <0xE0000000 0x1000>;
interrupts = <59 0>;
clock = <50000000>;
};
};
};
......@@ -1397,6 +1397,40 @@ static struct clk dss_dss_clk = {
.recalc = &followparent_recalc,
};
static const struct clksel_rate div3_8to32_rates[] = {
{ .div = 8, .val = 0, .flags = RATE_IN_44XX },
{ .div = 16, .val = 1, .flags = RATE_IN_44XX },
{ .div = 32, .val = 2, .flags = RATE_IN_44XX },
{ .div = 0 },
};
static const struct clksel div_ts_div[] = {
{ .parent = &l4_wkup_clk_mux_ck, .rates = div3_8to32_rates },
{ .parent = NULL },
};
static struct clk div_ts_ck = {
.name = "div_ts_ck",
.parent = &l4_wkup_clk_mux_ck,
.clksel = div_ts_div,
.clksel_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_24_25_MASK,
.ops = &clkops_null,
.recalc = &omap2_clksel_recalc,
.round_rate = &omap2_clksel_round_rate,
.set_rate = &omap2_clksel_set_rate,
};
static struct clk bandgap_ts_fclk = {
.name = "bandgap_ts_fclk",
.ops = &clkops_omap2_dflt,
.enable_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL,
.enable_bit = OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT,
.clkdm_name = "l4_wkup_clkdm",
.parent = &div_ts_ck,
.recalc = &followparent_recalc,
};
static struct clk dss_48mhz_clk = {
.name = "dss_48mhz_clk",
.ops = &clkops_omap2_dflt,
......@@ -3028,7 +3062,9 @@ static struct omap_clk omap44xx_clks[] = {
CLK(NULL, "aes2_fck", &aes2_fck, CK_443X),
CLK(NULL, "aess_fck", &aess_fck, CK_443X),
CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X),
CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X),
CLK(NULL, "des3des_fck", &des3des_fck, CK_443X),
CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X),
CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X),
CLK(NULL, "dmic_fck", &dmic_fck, CK_443X),
CLK(NULL, "dsp_fck", &dsp_fck, CK_443X),
......@@ -3208,6 +3244,9 @@ int __init omap4xxx_clk_init(void)
if (cpu_is_omap44xx()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
} else if (cpu_is_omap446x()) {
cpu_mask = RATE_IN_4460;
cpu_clkflg = CK_446X;
}
clk_init(&omap2_clk_functions);
......
......@@ -101,6 +101,10 @@
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9)
/* Used by CM_L4CFG_CLKSTCTRL */
#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT 9
#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK (1 << 9)
/* Used by CM_CEFUSE_CLKSTCTRL */
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9
#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9)
......@@ -413,6 +417,10 @@
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11
#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11)
/* Used by CM_WKUP_CLKSTCTRL */
#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT 13
#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK (1 << 13)
/*
* Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL,
* CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL,
......@@ -444,6 +452,10 @@
#define OMAP4430_CLKSEL_60M_SHIFT 24
#define OMAP4430_CLKSEL_60M_MASK (1 << 24)
/* Used by CM_MPU_MPU_CLKCTRL */
#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT 25
#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
/* Used by CM1_ABE_AESS_CLKCTRL */
#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24)
......@@ -460,6 +472,10 @@
#define OMAP4430_CLKSEL_DIV_SHIFT 24
#define OMAP4430_CLKSEL_DIV_MASK (1 << 24)
/* Used by CM_MPU_MPU_CLKCTRL */
#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT 24
#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
/* Used by CM_CAM_FDIF_CLKCTRL */
#define OMAP4430_CLKSEL_FCLK_SHIFT 24
#define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24)
......@@ -555,6 +571,14 @@
#define OMAP4430_D2D_STATDEP_SHIFT 18
#define OMAP4430_D2D_STATDEP_MASK (1 << 18)
/* Used by CM_CLKSEL_DPLL_MPU */
#define OMAP4460_DCC_COUNT_MAX_SHIFT 24
#define OMAP4460_DCC_COUNT_MAX_MASK (0xff << 24)
/* Used by CM_CLKSEL_DPLL_MPU */
#define OMAP4460_DCC_EN_SHIFT 22
#define OMAP4460_DCC_EN_MASK (1 << 22)
/*
* Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
* CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
......@@ -564,6 +588,10 @@
#define OMAP4430_DELTAMSTEP_SHIFT 0
#define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0)
/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */
#define OMAP4460_DELTAMSTEP_0_20_SHIFT 0
#define OMAP4460_DELTAMSTEP_0_20_MASK (0x1fffff << 0)
/* Used by CM_DLL_CTRL */
#define OMAP4430_DLL_OVERRIDE_SHIFT 0
#define OMAP4430_DLL_OVERRIDE_MASK (1 << 0)
......@@ -1106,6 +1134,10 @@
#define OMAP4430_MODULEMODE_SHIFT 0
#define OMAP4430_MODULEMODE_MASK (0x3 << 0)
/* Used by CM_L4CFG_DYNAMICDEP */
#define OMAP4460_MPU_DYNDEP_SHIFT 19
#define OMAP4460_MPU_DYNDEP_MASK (1 << 19)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9
#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9)
......@@ -1198,6 +1230,10 @@
#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10
#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10)
/* Used by CM_WKUP_BANDGAP_CLKCTRL */
#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT 8
#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK (1 << 8)
/* Used by CM_DSS_DSS_CLKCTRL */
#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11
#define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11)
......
......@@ -31,7 +31,7 @@
static struct omap_chip_id omap_chip;
static unsigned int omap_revision;
u32 omap3_features;
u32 omap_features;
unsigned int omap_rev(void)
{
......@@ -183,14 +183,14 @@ static void __init omap24xx_check_revision(void)
#define OMAP3_CHECK_FEATURE(status,feat) \
if (((status & OMAP3_ ##feat## _MASK) \
>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \
omap3_features |= OMAP3_HAS_ ##feat; \
omap_features |= OMAP3_HAS_ ##feat; \
}
static void __init omap3_check_features(void)
{
u32 status;
omap3_features = 0;
omap_features = 0;
status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
......@@ -200,11 +200,11 @@ static void __init omap3_check_features(void)
OMAP3_CHECK_FEATURE(status, NEON);
OMAP3_CHECK_FEATURE(status, ISP);
if (cpu_is_omap3630())
omap3_features |= OMAP3_HAS_192MHZ_CLK;
omap_features |= OMAP3_HAS_192MHZ_CLK;
if (!cpu_is_omap3505() && !cpu_is_omap3517())
omap3_features |= OMAP3_HAS_IO_WAKEUP;
omap_features |= OMAP3_HAS_IO_WAKEUP;
omap3_features |= OMAP3_HAS_SDRC;
omap_features |= OMAP3_HAS_SDRC;
/*
* TODO: Get additional info (where applicable)
......@@ -212,9 +212,34 @@ static void __init omap3_check_features(void)
*/
}
static void __init omap4_check_features(void)
{
u32 si_type;
if (cpu_is_omap443x())
omap_features |= OMAP4_HAS_MPU_1GHZ;
if (cpu_is_omap446x()) {
si_type =
read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1);
switch ((si_type & (3 << 16)) >> 16) {
case 2:
/* High performance device */
omap_features |= OMAP4_HAS_MPU_1_5GHZ;
break;
case 1:
default:
/* Standard device */
omap_features |= OMAP4_HAS_MPU_1_2GHZ;
break;
}
}
}
static void __init ti816x_check_features(void)
{
omap3_features = OMAP3_HAS_NEON;
omap_features = OMAP3_HAS_NEON;
}
static void __init omap3_check_revision(void)
......@@ -344,10 +369,10 @@ static void __init omap4_check_revision(void)
rev = (idcode >> 28) & 0xf;
/*
* Few initial ES2.0 samples IDCODE is same as ES1.0
* Few initial 4430 ES2.0 samples IDCODE is same as ES1.0
* Use ARM register to detect the correct ES version
*/
if (!rev) {
if (!rev && (hawkeye != 0xb94e)) {
idcode = read_cpuid(CPUID_ID);
rev = (idcode & 0xf) - 1;
}
......@@ -377,6 +402,15 @@ static void __init omap4_check_revision(void)
omap_chip.oc |= CHIP_IS_OMAP4430ES2_2;
}
break;
case 0xb94e:
switch (rev) {
case 0:
default:
omap_revision = OMAP4460_REV_ES1_0;
omap_chip.oc |= CHIP_IS_OMAP4460ES1_0;
break;
}
break;
default:
/* Unknown default to latest silicon rev as default */
omap_revision = OMAP4430_REV_ES2_2;
......@@ -518,6 +552,7 @@ void __init omap2_check_revision(void)
return;
} else if (cpu_is_omap44xx()) {
omap4_check_revision();
omap4_check_features();
return;
} else {
pr_err("OMAP revision unknown, please fix!\n");
......
......@@ -283,6 +283,14 @@
#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT 10
#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK (0x3 << 10)
/* Used by PRM_DEVICE_OFF_CTRL */
#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT 8
#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK (1 << 8)
/* Used by PRM_DEVICE_OFF_CTRL */
#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT 9
#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK (1 << 9)
/* Used by RM_MPU_RSTST */
#define OMAP4430_EMULATION_RST_SHIFT 0
#define OMAP4430_EMULATION_RST_MASK (1 << 0)
......
obj-y := timer.o
obj-y += irq.o
obj-y += clock.o
obj-y += rstc.o
obj-y += prima2.o
obj-$(CONFIG_DEBUG_LL) += lluart.o
obj-$(CONFIG_CACHE_L2X0) += l2x0.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
This diff is collapsed.
/*
* This file contains common function prototypes to avoid externs in the c files.
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_COMMON_H__
#define __MACH_PRIMA2_COMMON_H__
#include <linux/init.h>
#include <asm/mach/time.h>
extern struct sys_timer sirfsoc_timer;
extern void __init sirfsoc_of_irq_init(void);
extern void __init sirfsoc_of_clk_init(void);
#ifndef CONFIG_DEBUG_LL
static inline void sirfsoc_map_lluart(void) {}
#else
extern void __init sirfsoc_map_lluart(void);
#endif
#endif
/*
* arch/arm/mach-prima2/include/mach/clkdev.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
#endif
/*
* arch/arm/mach-prima2/include/mach/debug-macro.S
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <mach/hardware.h>
#include <mach/uart.h>
.macro addruart, rp, rv
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm
.macro senduart,rd,rx
str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
.endm
.macro busyuart,rd,rx
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY
beq 1001b
.endm
/*
* arch/arm/mach-prima2/include/mach/entry-macro.S
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <mach/hardware.h>
#define SIRFSOC_INT_ID 0x38
.macro get_irqnr_preamble, base, tmp
ldr \base, =sirfsoc_intc_base
ldr \base, [\base]
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq
cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
movges \irqnr, #0
.endm
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* arch/arm/mach-prima2/include/mach/hardware.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_HARDWARE_H__
#define __MACH_HARDWARE_H__
#include <asm/sizes.h>
#include <mach/map.h>
#endif
/*
* arch/arm/mach-prima2/include/mach/io.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_IO_H
#define __MACH_PRIMA2_IO_H
#define IO_SPACE_LIMIT ((resource_size_t)0)
#define __mem_pci(a) (a)
#endif
/*
* arch/arm/mach-prima2/include/mach/irqs.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define SIRFSOC_INTENAL_IRQ_START 0
#define SIRFSOC_INTENAL_IRQ_END 59
#define NR_IRQS 220
#endif
/*
* memory & I/O static mapping definitions for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_MAP_H__
#define __MACH_PRIMA2_MAP_H__
#include <mach/vmalloc.h>
#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000))
#endif
/*
* arch/arm/mach-prima2/include/mach/memory.h
*
* Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Restrict DMA-able region to workaround silicon limitation.
* The limitation restricts buffers available for DMA to SD/MMC
* hardware to be below 256MB
*/
#define ARM_DMA_ZONE_SIZE (SZ_256M)
#endif
/*
* arch/arm/mach-prima2/include/mach/system.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
#include <linux/bitops.h>
#include <mach/hardware.h>
#define SIRFSOC_SYS_RST_BIT BIT(31)
extern void __iomem *sirfsoc_rstc_base;
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base);
}
#endif
/*
* arch/arm/mach-prima2/include/mach/timex.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_TIMEX_H__
#define __MACH_TIMEX_H__
#define CLOCK_TICK_RATE 1000000
#endif
/*
* arch/arm/mach-prima2/include/mach/uart.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_PRIMA2_SIRFSOC_UART_H
#define __MACH_PRIMA2_SIRFSOC_UART_H
/* UART-1: used as serial debug port */
#define SIRFSOC_UART1_PA_BASE 0xb0060000
#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000)
#define SIRFSOC_UART1_SIZE SZ_4K
#define SIRFSOC_UART_TXFIFO_STATUS 0x0114
#define SIRFSOC_UART_TXFIFO_DATA 0x0118
#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5)
#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6)
#endif
/*
* arch/arm/mach-prima2/include/mach/uncompress.h
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/uart.h>
void arch_decomp_setup(void)
{
}
#define arch_decomp_wdog()
static __inline__ void putc(char c)
{
/*
* during kernel decompression, all mappings are flat:
* virt_addr == phys_addr
*/
while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
& SIRFSOC_UART1_TXFIFO_FULL)
barrier();
__raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA);
}
static inline void flush(void)
{
}
#endif
/*
* arch/arm/ach-prima2/include/mach/vmalloc.h
*
* Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#ifndef __MACH_VMALLOC_H
#define __MACH_VMALLOC_H
#include <linux/const.h>
#define VMALLOC_END _AC(0xFEC00000, UL)
#endif
/*
* interrupt controller support for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/mach/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#define SIRFSOC_INT_RISC_MASK0 0x0018
#define SIRFSOC_INT_RISC_MASK1 0x001C
#define SIRFSOC_INT_RISC_LEVEL0 0x0020
#define SIRFSOC_INT_RISC_LEVEL1 0x0024
void __iomem *sirfsoc_intc_base;
static __init void
sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq);
ct = gc->chip_types;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->regs.mask = SIRFSOC_INT_RISC_MASK0;
irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0);
}
static __init void sirfsoc_irq_init(void)
{
sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32);
sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0);
writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1);
}
static struct of_device_id intc_ids[] = {
{ .compatible = "sirf,prima2-intc" },
};
void __init sirfsoc_of_irq_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, intc_ids);
if (!np)
panic("unable to find compatible intc node in dtb\n");
sirfsoc_intc_base = of_iomap(np, 0);
if (!sirfsoc_intc_base)
panic("unable to map intc cpu registers\n");
of_node_put(np);
sirfsoc_irq_init();
}
/*
* l2 cache initialization for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/memory.h>
#define L2X0_ADDR_FILTERING_START 0xC00
#define L2X0_ADDR_FILTERING_END 0xC04
static struct of_device_id l2x_ids[] = {
{ .compatible = "arm,pl310-cache" },
};
static int __init sirfsoc_of_l2x_init(void)
{
struct device_node *np;
void __iomem *sirfsoc_l2x_base;
np = of_find_matching_node(NULL, l2x_ids);
if (!np)
panic("unable to find compatible l2x node in dtb\n");
sirfsoc_l2x_base = of_iomap(np, 0);
if (!sirfsoc_l2x_base)
panic("unable to map l2x cpu registers\n");
of_node_put(np);
if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) {
/*
* set the physical memory windows L2 cache will cover
*/
writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
writel_relaxed(0,
sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL);
writel_relaxed(0,
sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL);
}
l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000,
0x00000000);
return 0;
}
early_initcall(sirfsoc_of_l2x_init);
/*
* Static memory mapping for DEBUG_LL
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <mach/map.h>
#include <mach/uart.h>
void __init sirfsoc_map_lluart(void)
{
struct map_desc sirfsoc_lluart_map = {
.virtual = SIRFSOC_UART1_VA_BASE,
.pfn = __phys_to_pfn(SIRFSOC_UART1_PA_BASE),
.length = SIRFSOC_UART1_SIZE,
.type = MT_DEVICE,
};
iotable_init(&sirfsoc_lluart_map, 1);
}
/*
* Defines machines for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include "common.h"
static struct of_device_id sirfsoc_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
{},
};
void __init sirfsoc_mach_init(void)
{
of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL);
}
static const char *prima2cb_dt_match[] __initdata = {
"sirf,prima2-cb",
NULL
};
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
.boot_params = 0x00000100,
.init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
MACHINE_END
/*
* reset controller for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/of_address.h>
void __iomem *sirfsoc_rstc_base;
static DEFINE_MUTEX(rstc_lock);
static struct of_device_id rstc_ids[] = {
{ .compatible = "sirf,prima2-rstc" },
};
static int __init sirfsoc_of_rstc_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, rstc_ids);
if (!np)
panic("unable to find compatible rstc node in dtb\n");
sirfsoc_rstc_base = of_iomap(np, 0);
if (!sirfsoc_rstc_base)
panic("unable to map rstc cpu registers\n");
of_node_put(np);
return 0;
}
early_initcall(sirfsoc_of_rstc_init);
int sirfsoc_reset_device(struct device *dev)
{
const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL);
unsigned int reset_bit;
if (!prop)
return -ENODEV;
reset_bit = be32_to_cpup(prop);
mutex_lock(&rstc_lock);
/*
* Writing 1 to this bit resets corresponding block. Writing 0 to this
* bit de-asserts reset signal of the corresponding block.
* datasheet doesn't require explicit delay between the set and clear
* of reset bit. it could be shorter if tests pass.
*/
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit,
sirfsoc_rstc_base + (reset_bit / 32) * 4);
msleep(10);
writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit,
sirfsoc_rstc_base + (reset_bit / 32) * 4);
mutex_unlock(&rstc_lock);
return 0;
}
/*
* System timer for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*
* Licensed under GPLv2 or later.
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/bitops.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/map.h>
#include <asm/mach/time.h>
#define SIRFSOC_TIMER_COUNTER_LO 0x0000
#define SIRFSOC_TIMER_COUNTER_HI 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0008
#define SIRFSOC_TIMER_MATCH_1 0x000C
#define SIRFSOC_TIMER_MATCH_2 0x0010
#define SIRFSOC_TIMER_MATCH_3 0x0014
#define SIRFSOC_TIMER_MATCH_4 0x0018
#define SIRFSOC_TIMER_MATCH_5 0x001C
#define SIRFSOC_TIMER_STATUS 0x0020
#define SIRFSOC_TIMER_INT_EN 0x0024
#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028
#define SIRFSOC_TIMER_DIV 0x002C
#define SIRFSOC_TIMER_LATCH 0x0030
#define SIRFSOC_TIMER_LATCHED_LO 0x0034
#define SIRFSOC_TIMER_LATCHED_HI 0x0038
#define SIRFSOC_TIMER_WDT_INDEX 5
#define SIRFSOC_TIMER_LATCH_BIT BIT(0)
static void __iomem *sirfsoc_timer_base;
static void __init sirfsoc_of_timer_map(void);
/* timer0 interrupt handler */
static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ce = dev_id;
WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0)));
/* clear timer0 interrupt */
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
ce->event_handler(ce);
return IRQ_HANDLED;
}
/* read 64-bit timer counter */
static cycle_t sirfsoc_timer_read(struct clocksource *cs)
{
u64 cycles;
/* latch the 64-bit timer counter */
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI);
cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
return cycles;
}
static int sirfsoc_timer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
unsigned long now, next;
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
next = now + delta;
writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0);
writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH);
now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO);
return next - now > delta ? -ETIME : 0;
}
static void sirfsoc_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *ce)
{
u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
WARN_ON(1);
break;
case CLOCK_EVT_MODE_ONESHOT:
writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_RESUME:
break;
}
}
static struct clock_event_device sirfsoc_clockevent = {
.name = "sirfsoc_clockevent",
.rating = 200,
.features = CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sirfsoc_timer_set_mode,
.set_next_event = sirfsoc_timer_set_next_event,
};
static struct clocksource sirfsoc_clocksource = {
.name = "sirfsoc_clocksource",
.rating = 200,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.read = sirfsoc_timer_read,
};
static struct irqaction sirfsoc_timer_irq = {
.name = "sirfsoc_timer0",
.flags = IRQF_TIMER,
.irq = 0,
.handler = sirfsoc_timer_interrupt,
.dev_id = &sirfsoc_clockevent,
};
/* Overwrite weak default sched_clock with more precise one */
unsigned long long notrace sched_clock(void)
{
static int is_mapped = 0;
/*
* sched_clock is called earlier than .init of sys_timer
* if we map timer memory in .init of sys_timer, system
* will panic due to illegal memory access
*/
if(!is_mapped) {
sirfsoc_of_timer_map();
is_mapped = 1;
}
return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE);
}
static void __init sirfsoc_clockevent_init(void)
{
clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
sirfsoc_clockevent.max_delta_ns =
clockevent_delta2ns(-2, &sirfsoc_clockevent);
sirfsoc_clockevent.min_delta_ns =
clockevent_delta2ns(2, &sirfsoc_clockevent);
sirfsoc_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&sirfsoc_clockevent);
}
/* initialize the kernel jiffy timer source */
static void __init sirfsoc_timer_init(void)
{
unsigned long rate;
/* timer's input clock is io clock */
struct clk *clk = clk_get_sys("io", NULL);
BUG_ON(IS_ERR(clk));
rate = clk_get_rate(clk);
BUG_ON(rate < CLOCK_TICK_RATE);
BUG_ON(rate % CLOCK_TICK_RATE);
writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
sirfsoc_clockevent_init();
}
static struct of_device_id timer_ids[] = {
{ .compatible = "sirf,prima2-tick" },
};
static void __init sirfsoc_of_timer_map(void)
{
struct device_node *np;
const unsigned int *intspec;
np = of_find_matching_node(NULL, timer_ids);
if (!np)
panic("unable to find compatible timer node in dtb\n");
sirfsoc_timer_base = of_iomap(np, 0);
if (!sirfsoc_timer_base)
panic("unable to map timer cpu registers\n");
/* Get the interrupts property */
intspec = of_get_property(np, "interrupts", NULL);
BUG_ON(!intspec);
sirfsoc_timer_irq.irq = be32_to_cpup(intspec);
of_node_put(np);
}
struct sys_timer sirfsoc_timer = {
.init = sirfsoc_timer_init,
};
#
# Makefile for the linux kernel.
#
# Common support
obj-y := common.o timer.o board_dt.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
/*
* This file contains common code that is intended to be used across
* boards so that it's not replicated.
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <mach/zynq_soc.h>
#include <mach/clkdev.h>
#include "common.h"
static struct of_device_id zynq_of_bus_ids[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
/**
* xilinx_init_machine() - System specific initialization, intended to be
* called from board specific initialization.
*/
static void __init xilinx_init_machine(void)
{
#ifdef CONFIG_CACHE_L2X0
/*
* 64KB way size, 8-way associativity, parity disabled
*/
l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF);
#endif
of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
}
/**
* xilinx_irq_init() - Interrupt controller initialization for the GIC.
*/
static void __init xilinx_irq_init(void)
{
gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
}
/* The minimum devices needed to be mapped before the VM system is up and
* running include the GIC, UART and Timer Counter.
*/
static struct map_desc io_desc[] __initdata = {
{
.virtual = TTC0_VIRT,
.pfn = __phys_to_pfn(TTC0_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = SCU_PERIPH_VIRT,
.pfn = __phys_to_pfn(SCU_PERIPH_PHYS),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = PL310_L2CC_VIRT,
.pfn = __phys_to_pfn(PL310_L2CC_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_DEBUG_LL
{
.virtual = UART0_VIRT,
.pfn = __phys_to_pfn(UART0_PHYS),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
/**
* xilinx_map_io() - Create memory mappings needed for early I/O.
*/
static void __init xilinx_map_io(void)
{
iotable_init(io_desc, ARRAY_SIZE(io_desc));
}
static const char *xilinx_dt_match[] = {
"xlnx,zynq-ep107",
NULL
};
MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
.map_io = xilinx_map_io,
.init_irq = xilinx_irq_init,
.init_machine = xilinx_init_machine,
.timer = &xttcpss_sys_timer,
.dt_compat = xilinx_dt_match,
MACHINE_END
/*
* This file contains common function prototypes to avoid externs
* in the c files.
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
#include <asm/mach/time.h>
extern struct sys_timer xttcpss_sys_timer;
#endif
/*
* arch/arm/mach-zynq/include/mach/clkdev.h
*
* Copyright (C) 2011 Xilinx, Inc.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __MACH_CLKDEV_H__
#define __MACH_CLKDEV_H__
#include <plat/clock.h>
struct clk {
unsigned long rate;
const struct clk_ops *ops;
const struct icst_params *params;
void __iomem *vcoreg;
};
#define __clk_get(clk) ({ 1; })
#define __clk_put(clk) do { } while (0)
#endif
/* arch/arm/mach-zynq/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <mach/zynq_soc.h>
#include <mach/uart.h>
.macro addruart, rp, rv
ldr \rp, =LL_UART_PADDR @ physical
ldr \rv, =LL_UART_VADDR @ virtual
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA
.endm
.macro waituart,rd,rx
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register
tst \rd, #UART_SR_TXFULL @
bne 1002b @ wait if FIFO is full
.endm
/*
* arch/arm/mach-zynq/include/mach/entry-macro.S
*
* Low-level IRQ helper macros
*
* Copyright (C) 2011 Xilinx
*
* based on arch/plat-mxc/include/mach/entry-macro.S
*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <mach/hardware.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/* arch/arm/mach-zynq/include/mach/hardware.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_HARDWARE_H__
#define __MACH_HARDWARE_H__
#endif
/* arch/arm/mach-zynq/include/mach/io.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_IO_H__
#define __MACH_IO_H__
/* Allow IO space to be anywhere in the memory */
#define IO_SPACE_LIMIT 0xffff
/* IO address mapping macros, nothing special at this time but required */
#ifdef __ASSEMBLER__
#define IOMEM(x) (x)
#else
#define IOMEM(x) ((void __force __iomem *)(x))
#endif
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)
#endif
/* arch/arm/mach-zynq/include/mach/irqs.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_IRQS_H
#define __MACH_IRQS_H
#define ARCH_NR_GPIOS 118
#define NR_IRQS (128 + ARCH_NR_GPIOS)
#endif
/* arch/arm/mach-zynq/include/mach/memory.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_MEMORY_H__
#define __MACH_MEMORY_H__
#include <asm/sizes.h>
#define PLAT_PHYS_OFFSET UL(0x0)
#endif
/* arch/arm/mach-zynq/include/mach/system.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_SYSTEM_H__
#define __MACH_SYSTEM_H__
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode, const char *cmd)
{
/* Add architecture specific reset processing here */
}
#endif
/* arch/arm/mach-zynq/include/mach/timex.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_TIMEX_H__
#define __MACH_TIMEX_H__
/* the following is needed for the system to build but will be removed
in the future, the value is not important but won't hurt
*/
#define CLOCK_TICK_RATE (100 * HZ)
#endif
/* arch/arm/mach-zynq/include/mach/uart.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UART_H__
#define __MACH_UART_H__
#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */
#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */
#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */
#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
#endif
/* arch/arm/mach-zynq/include/mach/uncompress.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_UNCOMPRESS_H__
#define __MACH_UNCOMPRESS_H__
#include <linux/io.h>
#include <asm/processor.h>
#include <mach/zynq_soc.h>
#include <mach/uart.h>
void arch_decomp_setup(void)
{
}
static inline void flush(void)
{
/*
* Wait while the FIFO is not empty
*/
while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXEMPTY))
cpu_relax();
}
#define arch_decomp_wdog()
static void putc(char ch)
{
/*
* Wait for room in the FIFO, then write the char into the FIFO
*/
while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) &
UART_SR_TXFULL)
cpu_relax();
__raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET));
}
#endif
/* arch/arm/mach-zynq/include/mach/vmalloc.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_VMALLOC_H__
#define __MACH_VMALLOC_H__
#define VMALLOC_END 0xE0000000UL
#endif
/* arch/arm/mach-zynq/include/mach/zynq_soc.h
*
* Copyright (C) 2011 Xilinx
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __MACH_XILINX_SOC_H__
#define __MACH_XILINX_SOC_H__
#define PERIPHERAL_CLOCK_RATE 2500000
/* For now, all mappings are flat (physical = virtual)
*/
#define UART0_PHYS 0xE0000000
#define UART0_VIRT UART0_PHYS
#define TTC0_PHYS 0xF8001000
#define TTC0_VIRT TTC0_PHYS
#define PL310_L2CC_PHYS 0xF8F02000
#define PL310_L2CC_VIRT PL310_L2CC_PHYS
#define SCU_PERIPH_PHYS 0xF8F00000
#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS
/* The following are intended for the devices that are mapped early */
#define TTC0_BASE IOMEM(TTC0_VIRT)
#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT)
#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100)
#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000)
#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT)
/*
* Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical
*/
#define LL_UART_PADDR UART0_PHYS
#define LL_UART_VADDR UART0_VIRT
#endif
/*
* This file contains driver for the Xilinx PS Timer Counter IP.
*
* Copyright (C) 2011 Xilinx
*
* based on arch/mips/kernel/time.c timer driver
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/types.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <asm/mach/time.h>
#include <mach/zynq_soc.h>
#include "common.h"
#define IRQ_TIMERCOUNTER0 42
/*
* This driver configures the 2 16-bit count-up timers as follows:
*
* T1: Timer 1, clocksource for generic timekeeping
* T2: Timer 2, clockevent source for hrtimers
* T3: Timer 3, <unused>
*
* The input frequency to the timer module for emulation is 2.5MHz which is
* common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32,
* the timers are clocked at 78.125KHz (12.8 us resolution).
*
* The input frequency to the timer module in silicon will be 200MHz. With the
* pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution).
*/
#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */
#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */
#define XTTCPSS_TIMER_BASE TTC0_BASE
#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1)
/*
* Timer Register Offset Definitions of Timer 1, Increment base address by 4
* and use same offsets for Timer 2
*/
#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */
#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */
#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */
#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1
/* Setup the timers to use pre-scaling */
#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32)
/**
* struct xttcpss_timer - This definition defines local timer structure
*
* @base_addr: Base address of timer
**/
struct xttcpss_timer {
void __iomem *base_addr;
};
static struct xttcpss_timer timers[2];
static struct clock_event_device xttcpss_clockevent;
/**
* xttcpss_set_interval - Set the timer interval value
*
* @timer: Pointer to the timer instance
* @cycles: Timer interval ticks
**/
static void xttcpss_set_interval(struct xttcpss_timer *timer,
unsigned long cycles)
{
u32 ctrl_reg;
/* Disable the counter, set the counter value and re-enable counter */
ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
__raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
/* Reset the counter (0x10) so that it starts from 0, one-shot
mode makes this needed for timing to be right. */
ctrl_reg |= 0x10;
ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
}
/**
* xttcpss_clock_event_interrupt - Clock event timer interrupt handler
*
* @irq: IRQ number of the Timer
* @dev_id: void pointer to the xttcpss_timer instance
*
* returns: Always IRQ_HANDLED - success
**/
static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &xttcpss_clockevent;
struct xttcpss_timer *timer = dev_id;
/* Acknowledge the interrupt and call event handler */
__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
timer->base_addr + XTTCPSS_ISR_OFFSET);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction event_timer_irq = {
.name = "xttcpss clockevent",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = xttcpss_clock_event_interrupt,
};
/**
* xttcpss_timer_hardware_init - Initialize the timer hardware
*
* Initialize the hardware to start the clock source, get the clock
* event timer ready to use, and hook up the interrupt.
**/
static void __init xttcpss_timer_hardware_init(void)
{
/* Setup the clock source counter to be an incrementing counter
* with no interrupt and it rolls over at 0xFFFF. Pre-scale
it by 32 also. Let it start running now.
*/
timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE;
__raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr +
XTTCPSS_IER_OFFSET);
__raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr +
XTTCPSS_CLK_CNTRL_OFFSET);
__raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr +
XTTCPSS_CNT_CNTRL_OFFSET);
/* Setup the clock event timer to be an interval timer which
* is prescaled by 32 using the interval interrupt. Leave it
* disabled for now.
*/
timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4;
__raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr +
XTTCPSS_CNT_CNTRL_OFFSET);
__raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr +
XTTCPSS_CLK_CNTRL_OFFSET);
__raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr +
XTTCPSS_IER_OFFSET);
/* Setup IRQ the clock event timer */
event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT];
setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq);
}
/**
* __raw_readl_cycles - Reads the timer counter register
*
* returns: Current timer counter register value
**/
static cycle_t __raw_readl_cycles(struct clocksource *cs)
{
struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE];
return (cycle_t)__raw_readl(timer->base_addr +
XTTCPSS_COUNT_VAL_OFFSET);
}
/*
* Instantiate and initialize the clock source structure
*/
static struct clocksource clocksource_xttcpss = {
.name = "xttcpss_timer1",
.rating = 200, /* Reasonable clock source */
.read = __raw_readl_cycles,
.mask = CLOCKSOURCE_MASK(16),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/**
* xttcpss_set_next_event - Sets the time interval for next event
*
* @cycles: Timer interval ticks
* @evt: Address of clock event instance
*
* returns: Always 0 - success
**/
static int xttcpss_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
xttcpss_set_interval(timer, cycles);
return 0;
}
/**
* xttcpss_set_mode - Sets the mode of timer
*
* @mode: Mode to be set
* @evt: Address of clock event instance
**/
static void xttcpss_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT];
u32 ctrl_reg;
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
xttcpss_set_interval(timer, TIMER_RATE / HZ);
break;
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
ctrl_reg = __raw_readl(timer->base_addr +
XTTCPSS_CNT_CNTRL_OFFSET);
ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg,
timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
break;
case CLOCK_EVT_MODE_RESUME:
ctrl_reg = __raw_readl(timer->base_addr +
XTTCPSS_CNT_CNTRL_OFFSET);
ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
__raw_writel(ctrl_reg,
timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
break;
}
}
/*
* Instantiate and initialize the clock event structure
*/
static struct clock_event_device xttcpss_clockevent = {
.name = "xttcpss_timer2",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_next_event = xttcpss_set_next_event,
.set_mode = xttcpss_set_mode,
.rating = 200,
};
/**
* xttcpss_timer_init - Initialize the timer
*
* Initializes the timer hardware and register the clock source and clock event
* timers with Linux kernal timer framework
**/
static void __init xttcpss_timer_init(void)
{
xttcpss_timer_hardware_init();
clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE);
/* Calculate the parameters to allow the clockevent to operate using
integer math
*/
clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4);
xttcpss_clockevent.max_delta_ns =
clockevent_delta2ns(0xfffe, &xttcpss_clockevent);
xttcpss_clockevent.min_delta_ns =
clockevent_delta2ns(1, &xttcpss_clockevent);
/* Indicate that clock event is on 1st CPU as SMP boot needs it */
xttcpss_clockevent.cpumask = cpumask_of(0);
clockevents_register_device(&xttcpss_clockevent);
}
/*
* Instantiate and initialize the system timer structure
*/
struct sys_timer xttcpss_sys_timer = {
.init = xttcpss_timer_init,
};
......@@ -821,7 +821,8 @@ config CACHE_L2X0
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE
ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
ARCH_PRIMA2 || ARCH_ZYNQ
default y
select OUTER_CACHE
select OUTER_CACHE_SYNC
......
......@@ -39,6 +39,7 @@ struct omap_clk {
#define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */
#define CK_443X (1 << 11)
#define CK_TI816X (1 << 12)
#define CK_446X (1 << 13)
#define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS)
......
......@@ -58,10 +58,12 @@ struct clkops {
#define RATE_IN_36XX (1 << 4)
#define RATE_IN_4430 (1 << 5)
#define RATE_IN_TI816X (1 << 6)
#define RATE_IN_4460 (1 << 7)
#define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X)
#define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
#define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX)
#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460)
/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
#define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
......
......@@ -88,6 +88,7 @@ unsigned int omap_rev(void);
* cpu_is_omap243x(): True for OMAP2430
* cpu_is_omap343x(): True for OMAP3430
* cpu_is_omap443x(): True for OMAP4430
* cpu_is_omap446x(): True for OMAP4460
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
......@@ -123,6 +124,7 @@ IS_OMAP_SUBCLASS(243x, 0x243)
IS_OMAP_SUBCLASS(343x, 0x343)
IS_OMAP_SUBCLASS(363x, 0x363)
IS_OMAP_SUBCLASS(443x, 0x443)
IS_OMAP_SUBCLASS(446x, 0x446)
IS_TI_SUBCLASS(816x, 0x816)
......@@ -137,6 +139,7 @@ IS_TI_SUBCLASS(816x, 0x816)
#define cpu_is_ti816x() 0
#define cpu_is_omap44xx() 0
#define cpu_is_omap443x() 0
#define cpu_is_omap446x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
......@@ -361,8 +364,10 @@ IS_OMAP_TYPE(3517, 0x3517)
# if defined(CONFIG_ARCH_OMAP4)
# undef cpu_is_omap44xx
# undef cpu_is_omap443x
# undef cpu_is_omap446x
# define cpu_is_omap44xx() is_omap44xx()
# define cpu_is_omap443x() is_omap443x()
# define cpu_is_omap446x() is_omap446x()
# endif
/* Macros to detect if we have OMAP1 or OMAP2 */
......@@ -410,6 +415,9 @@ IS_OMAP_TYPE(3517, 0x3517)
#define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8))
#define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8))
#define OMAP446X_CLASS 0x44600044
#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8))
/*
* omap_chip bits
*
......@@ -439,13 +447,15 @@ IS_OMAP_TYPE(3517, 0x3517)
#define CHIP_IS_OMAP4430ES2_1 (1 << 12)
#define CHIP_IS_OMAP4430ES2_2 (1 << 13)
#define CHIP_IS_TI816X (1 << 14)
#define CHIP_IS_OMAP4460ES1_0 (1 << 15)
#define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
#define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \
CHIP_IS_OMAP4430ES2 | \
CHIP_IS_OMAP4430ES2_1 | \
CHIP_IS_OMAP4430ES2_2)
CHIP_IS_OMAP4430ES2_2 | \
CHIP_IS_OMAP4460ES1_0)
/*
* "GE" here represents "greater than or equal to" in terms of ES
......@@ -468,7 +478,7 @@ void omap2_check_revision(void);
/*
* Runtime detection of OMAP3 features
*/
extern u32 omap3_features;
extern u32 omap_features;
#define OMAP3_HAS_L2CACHE BIT(0)
#define OMAP3_HAS_IVA BIT(1)
......@@ -478,11 +488,15 @@ extern u32 omap3_features;
#define OMAP3_HAS_192MHZ_CLK BIT(5)
#define OMAP3_HAS_IO_WAKEUP BIT(6)
#define OMAP3_HAS_SDRC BIT(7)
#define OMAP4_HAS_MPU_1GHZ BIT(8)
#define OMAP4_HAS_MPU_1_2GHZ BIT(9)
#define OMAP4_HAS_MPU_1_5GHZ BIT(10)
#define OMAP3_HAS_FEATURE(feat,flag) \
static inline unsigned int omap3_has_ ##feat(void) \
{ \
return (omap3_features & OMAP3_HAS_ ##flag); \
return omap_features & OMAP3_HAS_ ##flag; \
} \
OMAP3_HAS_FEATURE(l2cache, L2CACHE)
......@@ -494,4 +508,19 @@ OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
OMAP3_HAS_FEATURE(sdrc, SDRC)
/*
* Runtime detection of OMAP4 features
*/
extern u32 omap_features;
#define OMAP4_HAS_FEATURE(feat, flag) \
static inline unsigned int omap4_has_ ##feat(void) \
{ \
return omap_features & OMAP4_HAS_ ##flag; \
} \
OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ)
OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ)
OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ)
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment