scsi: hisi_sas: Modify macro name for OOB phy linkrate

The macro for OOB phy linkrate is named CFG_PROG_PHY_LINK_RATE_* but that
is inaccurate. For clarification, include OOB in macro name.

Link: https://lore.kernel.org/r/1598958790-232272-3-git-send-email-john.garry@huawei.comSigned-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_v3_hw.c

@@ -191,8 +191,8 @@
 #define PHY_CFG_PHY_RST_OFF		3
 #define PHY_CFG_PHY_RST_MSK		(0x1 << PHY_CFG_PHY_RST_OFF)
 #define PROG_PHY_LINK_RATE		(PORT_BASE + 0x8)
-#define CFG_PROG_PHY_LINK_RATE_OFF	8
-#define CFG_PROG_PHY_LINK_RATE_MSK	(0xf << CFG_PROG_PHY_LINK_RATE_OFF)
+#define CFG_PROG_OOB_PHY_LINK_RATE_OFF	8
+#define CFG_PROG_OOB_PHY_LINK_RATE_MSK	(0xf << CFG_PROG_OOB_PHY_LINK_RATE_OFF)
 #define PHY_CTRL			(PORT_BASE + 0x14)
 #define PHY_CTRL_RESET_OFF		0
 #define PHY_CTRL_RESET_MSK		(0x1 << PHY_CTRL_RESET_OFF)
@@ -2998,8 +2998,8 @@ static void hisi_sas_bist_test_restore_v3_hw(struct hisi_hba *hisi_hba)
 	/* restore the linkrate */
 	reg_val = hisi_sas_phy_read32(hisi_hba, phy_id, PROG_PHY_LINK_RATE);
 	/* init OOB link rate as 1.5 Gbits */
-	reg_val &= ~CFG_PROG_PHY_LINK_RATE_MSK;
-	reg_val |= (0x8 << CFG_PROG_PHY_LINK_RATE_OFF);
+	reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
+	reg_val |= (0x8 << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
 	hisi_sas_phy_write32(hisi_hba, phy_id, PROG_PHY_LINK_RATE, reg_val);
 
 	/* enable PHY */
@@ -3027,8 +3027,8 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 		/* set linkrate of bit test*/
 		reg_val = hisi_sas_phy_read32(hisi_hba, phy_id,
 					      PROG_PHY_LINK_RATE);
-		reg_val &= ~CFG_PROG_PHY_LINK_RATE_MSK;
-		reg_val |= (linkrate << CFG_PROG_PHY_LINK_RATE_OFF);
+		reg_val &= ~CFG_PROG_OOB_PHY_LINK_RATE_MSK;
+		reg_val |= (linkrate << CFG_PROG_OOB_PHY_LINK_RATE_OFF);
 		hisi_sas_phy_write32(hisi_hba, phy_id,
 				     PROG_PHY_LINK_RATE, reg_val);
 
@@ -3050,8 +3050,7 @@ static int debugfs_set_bist_v3_hw(struct hisi_hba *hisi_hba, bool enable)
 		hisi_sas_phy_write32(hisi_hba, phy_id,
 				     SAS_PHY_BIST_CODE,
 				     SAS_PHY_BIST_CODE_INIT);
-		hisi_sas_phy_write32(hisi_hba, phy_id,
-				     SAS_PHY_BIST_CODE1,
+		hisi_sas_phy_write32(hisi_hba, phy_id, SAS_PHY_BIST_CODE1,
 				     SAS_PHY_BIST_CODE1_INIT);
 
 		mdelay(100);