Commit 4b6253fa authored by Dmitry Torokhov's avatar Dmitry Torokhov

Input: bu21013_ts - switch to using standard touchscreen properties

This switches the driver over to the standard touchscreen properties for
coordinate transformation, while keeping old bindings working as well.
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
parent 307ec663
......@@ -10,6 +10,16 @@ Required properties:
Optional properties:
- touch-gpios : GPIO pin registering a touch event
- <supply_name>-supply : Phandle to a regulator supply
- touchscreen-size-x : General touchscreen binding, see [1].
- touchscreen-size-y : General touchscreen binding, see [1].
- touchscreen-inverted-x : General touchscreen binding, see [1].
- touchscreen-inverted-y : General touchscreen binding, see [1].
- touchscreen-swapped-x-y : General touchscreen binding, see [1].
[1] All general touchscreen properties are described in
Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
Deprecated properties:
- rohm,touch-max-x : Maximum outward permitted limit in the X axis
- rohm,touch-max-y : Maximum outward permitted limit in the Y axis
- rohm,flip-x : Flip touch coordinates on the X axis
......@@ -26,8 +36,8 @@ Example:
touch-gpio = <&gpio2 20 GPIO_ACTIVE_LOW>;
avdd-supply = <&ab8500_ldo_aux1_reg>;
rohm,touch-max-x = <384>;
rohm,touch-max-y = <704>;
rohm,flip-y;
touchscreen-size-x = <384>;
touchscreen-size-y = <704>;
touchscreen-inverted-y;
};
};
......@@ -10,6 +10,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
......@@ -139,6 +140,7 @@
* struct bu21013_ts - touch panel data structure
* @client: pointer to the i2c client
* @in_dev: pointer to the input device structure
* @props: the device coordinate transformation properties
* @regulator: pointer to the Regulator used for touch screen
* @cs_gpiod: chip select GPIO line
* @int_gpiod: touch interrupt GPIO line
......@@ -155,6 +157,7 @@
struct bu21013_ts {
struct i2c_client *client;
struct input_dev *in_dev;
struct touchscreen_properties props;
struct regulator *regulator;
struct gpio_desc *cs_gpiod;
struct gpio_desc *int_gpiod;
......@@ -201,19 +204,13 @@ static int bu21013_do_touch_report(struct bu21013_ts *ts)
for (i = 0; i < MAX_FINGERS; i++) {
const u8 *data = &buf[4 * i + 3];
struct input_mt_pos *p = &pos[finger_down_count];
unsigned int x, y;
p->x = data[0] << SHIFT_2 | (data[1] & MASK_BITS);
p->y = data[2] << SHIFT_2 | (data[3] & MASK_BITS);
if (p->x == 0 || p->y == 0)
continue;
finger_down_count++;
if (ts->x_flip)
p->x = ts->touch_x_max - p->x;
if (ts->y_flip)
p->y = ts->touch_y_max - p->y;
x = data[0] << SHIFT_2 | (data[1] & MASK_BITS);
y = data[2] << SHIFT_2 | (data[3] & MASK_BITS);
if (x != 0 && y != 0)
touchscreen_set_mt_pos(&pos[finger_down_count++],
&ts->props, x, y);
}
if (finger_down_count == 2 &&
......@@ -412,6 +409,8 @@ static int bu21013_probe(struct i2c_client *client,
{
struct bu21013_ts *ts;
struct input_dev *in_dev;
struct input_absinfo *info;
u32 max_x = 0, max_y = 0;
int error;
if (!i2c_check_functionality(client->adapter,
......@@ -434,11 +433,6 @@ static int bu21013_probe(struct i2c_client *client,
ts->x_flip = device_property_read_bool(&client->dev, "rohm,flip-x");
ts->y_flip = device_property_read_bool(&client->dev, "rohm,flip-y");
device_property_read_u32(&client->dev, "rohm,touch-max-x",
&ts->touch_x_max);
device_property_read_u32(&client->dev, "rohm,touch-max-y",
&ts->touch_y_max);
in_dev = devm_input_allocate_device(&client->dev);
if (!in_dev) {
dev_err(&client->dev, "device memory alloc failed\n");
......@@ -451,10 +445,28 @@ static int bu21013_probe(struct i2c_client *client,
in_dev->name = DRIVER_TP;
in_dev->id.bustype = BUS_I2C;
input_set_abs_params(in_dev, ABS_MT_POSITION_X,
0, ts->touch_x_max, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y,
0, ts->touch_y_max, 0, 0);
device_property_read_u32(&client->dev, "rohm,touch-max-x", &max_x);
device_property_read_u32(&client->dev, "rohm,touch-max-y", &max_y);
input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0, max_x, 0, 0);
input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0, max_y, 0, 0);
touchscreen_parse_properties(in_dev, true, &ts->props);
/* Adjust for the legacy "flip" properties, if present */
if (!ts->props.invert_x &&
device_property_read_bool(&client->dev, "rohm,flip-x")) {
info = &in_dev->absinfo[ABS_MT_POSITION_X];
info->maximum -= info->minimum;
info->minimum = 0;
}
if (!ts->props.invert_y &&
device_property_read_bool(&client->dev, "rohm,flip-y")) {
info = &in_dev->absinfo[ABS_MT_POSITION_Y];
info->maximum -= info->minimum;
info->minimum = 0;
}
error = input_mt_init_slots(in_dev, MAX_FINGERS,
INPUT_MT_DIRECT | INPUT_MT_TRACK |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment