Commit 4bd597b6 authored by Sascha Hauer's avatar Sascha Hauer

ARM i.MX ehci: do ehci init in board specific functions

The mxc-ehci driver calls SoC specific phy initialization right after
calling board specific initialization. To offer greater flexibility for
boards to setup the phy and to get rid of some unnecessary flags in
platform data this patch lets the boards call the SoC specific phy
initialization and remove it from the driver.
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent cb07625d
......@@ -210,14 +210,24 @@ static struct platform_device serial_device = {
#endif
#if defined(CONFIG_USB_ULPI)
static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = eukrea_cpuimx27_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = eukrea_cpuimx27_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
......
......@@ -84,15 +84,25 @@ static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
},
};
static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.init = eukrea_cpuimx25_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = eukrea_cpuimx25_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
......
......@@ -30,6 +30,7 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
......@@ -210,14 +211,16 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
return 0;
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static const struct mxc_usbh_platform_data
visstrim_m10_usbotg_pdata __initconst = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static void __init visstrim_m10_board_init(void)
......
......@@ -185,9 +185,14 @@ static const struct matrix_keymap_data mx25pdk_keymap_data __initconst = {
.keymap_size = ARRAY_SIZE(mx25pdk_keymap),
};
static int mx25pdk_usbh2_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = mx25pdk_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
......
......@@ -160,10 +160,14 @@ static int otg_phy_init(void)
}
#if defined(CONFIG_USB_ULPI)
static int mx27_3ds_otg_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx27_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
......
......@@ -271,25 +271,29 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
return 0;
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int usbh2_phy_init(struct platform_device *pdev)
{
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
return 0;
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
......
......@@ -281,9 +281,15 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
}
};
static int pcm038_usbh2_init(struct platform_device *pdev)
{
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_DIFF_UNI);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = pcm038_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static void __init pcm038_init(void)
......
......@@ -176,8 +176,10 @@ static int usbotg_init(struct platform_device *pdev)
gpio_set_value(OTG_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(OTG_RESET, 1/*HIGH*/);
mdelay(10);
return 0;
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_DIFF_UNI);
otg_free_reset:
gpio_free(OTG_RESET);
......@@ -233,8 +235,10 @@ static int usbh2_init(struct platform_device *pdev)
gpio_set_value(USBH2_RESET, 0/*LOW*/);
mdelay(5);
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
mdelay(10);
return 0;
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_DIFF_UNI);
h2_free_reset:
gpio_free(USBH2_RESET);
......@@ -246,13 +250,11 @@ static int usbh2_init(struct platform_device *pdev)
static struct mxc_usbh_platform_data usbotg_pdata __initdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif /* CONFIG_USB_ULPI */
......
......@@ -111,15 +111,25 @@ static const struct mxc_nand_platform_data
.flash_bbt = 1,
};
static int eukrea_cpuimx35_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.init = eukrea_cpuimx35_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = eukrea_cpuimx35_usbh1_init,
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
......
......@@ -245,7 +245,13 @@ static int mx31_3ds_usbotg_init(void)
return err;
}
static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev)
#if defined(CONFIG_USB_ULPI)
static int mx31_3ds_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static int mx31_3ds_host2_init(struct platform_device *pdev)
{
int err;
......@@ -276,23 +282,24 @@ static int __maybe_unused mx31_3ds_host2_init(struct platform_device *pdev)
mdelay(1);
gpio_set_value(USBH2_RST_B, 1);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
usbotg_free_reset:
gpio_free(USBH2_RST_B);
return err;
}
#if defined(CONFIG_USB_ULPI)
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx31_3ds_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = mx31_3ds_host2_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
......
......@@ -24,6 +24,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/smsc911x.h>
......@@ -156,7 +157,9 @@ static int usbotg_init(struct platform_device *pdev)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), "USBH1 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE2), 0);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static int usbh1_init(struct platform_device *pdev)
......@@ -183,7 +186,10 @@ static int usbh1_init(struct platform_device *pdev)
mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
static int usbh2_init(struct platform_device *pdev)
......@@ -220,25 +226,24 @@ static int usbh2_init(struct platform_device *pdev)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbotg_pdata = {
.init = usbotg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = usbh1_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static void lilly1131_usb_init(void)
......
......@@ -27,6 +27,7 @@
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/mtd/physmap.h>
#include <linux/delay.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -167,13 +168,14 @@ static int usbh2_init(struct platform_device *pdev)
gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
#endif
......
......@@ -401,10 +401,14 @@ static void usb_xcvr_reset(void)
}
#if defined(CONFIG_USB_ULPI)
static int moboard_usbh2_init_hw(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = moboard_usbh2_init_hw,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init moboard_usbh2_init(void)
......
......@@ -120,6 +120,11 @@ static iomux_v3_cfg_t mx35pdk_pads[] = {
MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};
static int mx35_3ds_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
}
/* OTG config */
static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
......@@ -127,15 +132,20 @@ static const struct fsl_usb2_platform_data usb_otg_pdata __initconst = {
};
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = mx35_3ds_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static int mx35_3ds_usbh_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY);
}
/* USB HOST config */
static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
.init = mx35_3ds_usbh_init,
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY,
};
static int otg_mode_host;
......
......@@ -534,14 +534,24 @@ static struct platform_device pcm970_sja1000 = {
};
#if defined(CONFIG_USB_ULPI)
static int pcm037_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = pcm037_otg_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int pcm037_usbh2_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.init = pcm037_usbh2_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
......
......@@ -306,16 +306,26 @@ pcm037_nand_board_info __initconst = {
};
#if defined(CONFIG_USB_ULPI)
static int pcm043_otg_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static struct mxc_usbh_platform_data otg_pdata __initdata = {
.init = pcm043_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
#endif
static int pcm043_usbh1_init(struct platform_device *pdev)
{
return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh1_pdata __initconst = {
.init = pcm043_usbh1_init,
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
......
......@@ -15,6 +15,7 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
......@@ -149,7 +150,10 @@ static int devboard_usbh1_hw_init(struct platform_device *pdev)
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
......@@ -187,7 +191,6 @@ static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = devboard_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init devboard_usbh1_init(void)
......
......@@ -265,7 +265,10 @@ static int marxbot_usbh1_hw_init(struct platform_device *pdev)
mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
return 0;
mdelay(10);
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_INTERFACE_SINGLE_UNI);
}
#define USBH1_VBUSEN_B IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
......@@ -303,7 +306,6 @@ static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
static struct mxc_usbh_platform_data usbh1_pdata __initdata = {
.init = marxbot_usbh1_hw_init,
.portsc = MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
};
static int __init marxbot_usbh1_init(void)
......
......@@ -123,9 +123,14 @@ static const struct fsl_usb2_platform_data usb_pdata __initconst = {
#if defined(CONFIG_USB_ULPI)
static int smartbot_otg_init(struct platform_device *pdev)
{
return mx31_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
static struct mxc_usbh_platform_data otg_host_pdata __initdata = {
.init = smartbot_otg_init,
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
.flags = MXC_EHCI_POWER_PINS_ENABLED,
};
static int __init smartbot_otg_host_init(void)
......
......@@ -184,7 +184,10 @@ static int initialize_otg_port(struct platform_device *pdev)
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
......@@ -202,13 +205,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
......@@ -219,7 +225,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
......
......@@ -167,7 +167,10 @@ static int initialize_otg_port(struct platform_device *pdev)
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
......@@ -186,13 +189,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
......@@ -203,7 +209,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
......
......@@ -259,7 +259,10 @@ static int initialize_otg_port(struct platform_device *pdev)
v |= MX51_USB_PLL_DIV_19_2_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static int initialize_usbh1_port(struct platform_device *pdev)
......@@ -277,13 +280,16 @@ static int initialize_usbh1_port(struct platform_device *pdev)
v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
static struct fsl_usb2_platform_data usb_pdata = {
......@@ -294,7 +300,6 @@ static struct fsl_usb2_platform_data usb_pdata = {
static struct mxc_usbh_platform_data usbh1_config = {
.init = initialize_usbh1_port,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = (MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_ITC_NO_THRESHOLD),
};
static int otg_mode_host;
......
......@@ -145,13 +145,15 @@ static int initialize_otg_port(struct platform_device *pdev)
v |= MX51_USB_PLL_DIV_24_MHZ;
__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
iounmap(usb_base);
return 0;
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
}
static struct mxc_usbh_platform_data dr_utmi_config = {
.init = initialize_otg_port,
.portsc = MXC_EHCI_UTMI_16BIT,
.flags = MXC_EHCI_INTERNAL_PHY,
};
/* PCBID2 PCBID1 PCBID0 STATE
......
......@@ -13,7 +13,6 @@ obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o
obj-$(CONFIG_MXC_PWM) += pwm.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
obj-$(CONFIG_MXC_ULPI) += ulpi.o
obj-$(CONFIG_MXC_USE_EPIT) += epit.o
obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
......
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/mxc_ehci.h>
int mxc_initialize_usb_hw(int port, unsigned int flags)
{
#if defined(CONFIG_SOC_IMX25)
if (cpu_is_mx25())
return mx25_initialize_usb_hw(port, flags);
#endif /* if defined(CONFIG_SOC_IMX25) */
#if defined(CONFIG_ARCH_MX3)
if (cpu_is_mx31())
return mx31_initialize_usb_hw(port, flags);
if (cpu_is_mx35())
return mx35_initialize_usb_hw(port, flags);
#endif /* CONFIG_ARCH_MX3 */
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27())
return mx27_initialize_usb_hw(port, flags);
#endif /* CONFIG_MACH_MX27 */
#ifdef CONFIG_SOC_IMX51
if (cpu_is_mx51())
return mx51_initialize_usb_hw(port, flags);
#endif
printk(KERN_WARNING
"%s() unable to setup USBCONTROL for this CPU\n", __func__);
return -EINVAL;
}
EXPORT_SYMBOL(mxc_initialize_usb_hw);
......@@ -44,12 +44,9 @@ struct mxc_usbh_platform_data {
int (*exit)(struct platform_device *pdev);
unsigned int portsc;
unsigned int flags;
struct otg_transceiver *otg;
};
int mxc_initialize_usb_hw(int port, unsigned int flags);
int mx51_initialize_usb_hw(int port, unsigned int flags);
int mx25_initialize_usb_hw(int port, unsigned int flags);
int mx31_initialize_usb_hw(int port, unsigned int flags);
......
......@@ -203,11 +203,6 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
mdelay(10);
}
/* setup specific usb hw */
ret = mxc_initialize_usb_hw(pdev->id, pdata->flags);
if (ret < 0)
goto err_init;
ehci = hcd_to_ehci(hcd);
/* EHCI registers start at offset 0x100 */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment