serial/esp32_uart: use prescaler when available

esp32s3 variant of the esp32 UART has limited baudrate divisor range
that does not allow it to use 9600 and lower rates with 40MHz input
clock. Use clock prescaler present in this UART variant to help with
that.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Link: https://lore.kernel.org/r/20231018191252.1551972-1-jcmvbkbc@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/esp32_uart.c

@@ -67,6 +67,26 @@
 #define ESP32S3_UART_TXFIFO_EMPTY_THRHD_SHIFT	10
 #define ESP32_UART_RX_FLOW_EN			BIT(23)
 #define ESP32S3_UART_RX_FLOW_EN			BIT(22)
+#define ESP32S3_UART_CLK_CONF_REG	0x78
+#define ESP32S3_UART_SCLK_DIV_B			GENMASK(5, 0)
+#define ESP32S3_UART_SCLK_DIV_A			GENMASK(11, 6)
+#define ESP32S3_UART_SCLK_DIV_NUM		GENMASK(19, 12)
+#define ESP32S3_UART_SCLK_SEL			GENMASK(21, 20)
+#define APB_CLK					1
+#define RC_FAST_CLK				2
+#define XTAL_CLK				3
+#define ESP32S3_UART_SCLK_EN			BIT(22)
+#define ESP32S3_UART_RST_CORE			BIT(23)
+#define ESP32S3_UART_TX_SCLK_EN			BIT(24)
+#define ESP32S3_UART_RX_SCLK_EN			BIT(25)
+#define ESP32S3_UART_TX_RST_CORE		BIT(26)
+#define ESP32S3_UART_RX_RST_CORE		BIT(27)
+
+#define ESP32S3_UART_CLK_CONF_DEFAULT \
+	(ESP32S3_UART_RX_SCLK_EN | \
+	 ESP32S3_UART_TX_SCLK_EN | \
+	 ESP32S3_UART_SCLK_EN | \
+	 FIELD_PREP(ESP32S3_UART_SCLK_SEL, XTAL_CLK))
 
 struct esp32_port {
 	struct uart_port port;
@@ -80,6 +100,7 @@ struct esp32_uart_variant {
 	u32 txfifo_empty_thrhd_shift;
 	u32 rx_flow_en;
 	const char *type;
+	bool has_clkconf;
 };
 
 static const struct esp32_uart_variant esp32_variant = {
@@ -98,6 +119,7 @@ static const struct esp32_uart_variant esp32s3_variant = {
 	.txfifo_empty_thrhd_shift = ESP32S3_UART_TXFIFO_EMPTY_THRHD_SHIFT,
 	.rx_flow_en = ESP32S3_UART_RX_FLOW_EN,
 	.type = "ESP32S3 UART",
+	.has_clkconf = true,
 };
 
 static const struct of_device_id esp32_uart_dt_ids[] = {
@@ -314,6 +336,9 @@ static int esp32_uart_startup(struct uart_port *port)
 	}
 
 	spin_lock_irqsave(&port->lock, flags);
+	if (port_variant(port)->has_clkconf)
+		esp32_uart_write(port, ESP32S3_UART_CLK_CONF_REG,
+				 ESP32S3_UART_CLK_CONF_DEFAULT);
 	esp32_uart_write(port, UART_CONF1_REG,
 			 (1 << UART_RXFIFO_FULL_THRHD_SHIFT) |
 			 (1 << port_variant(port)->txfifo_empty_thrhd_shift));
@@ -335,10 +360,24 @@ static void esp32_uart_shutdown(struct uart_port *port)
 
 static bool esp32_uart_set_baud(struct uart_port *port, u32 baud)
 {
-	u32 div = port->uartclk / baud;
-	u32 frag = (port->uartclk * 16) / baud - div * 16;
+	u32 sclk = port->uartclk;
+	u32 div = sclk / baud;
+
+	if (port_variant(port)->has_clkconf) {
+		u32 sclk_div = div / port_variant(port)->clkdiv_mask;
+
+		if (div > port_variant(port)->clkdiv_mask) {
+			sclk /= (sclk_div + 1);
+			div = sclk / baud;
+		}
+		esp32_uart_write(port, ESP32S3_UART_CLK_CONF_REG,
+				 FIELD_PREP(ESP32S3_UART_SCLK_DIV_NUM, sclk_div) |
+				 ESP32S3_UART_CLK_CONF_DEFAULT);
+	}
 
 	if (div <= port_variant(port)->clkdiv_mask) {
+		u32 frag = (sclk * 16) / baud - div * 16;
+
 		esp32_uart_write(port, UART_CLKDIV_REG,
 				 div | FIELD_PREP(UART_CLKDIV_FRAG, frag));
 		return true;
@@ -355,11 +394,15 @@ static void esp32_uart_set_termios(struct uart_port *port,
 	u32 conf0, conf1;
 	u32 baud;
 	const u32 rx_flow_en = port_variant(port)->rx_flow_en;
+	u32 max_div = port_variant(port)->clkdiv_mask;
 
 	termios->c_cflag &= ~CMSPAR;
 
+	if (port_variant(port)->has_clkconf)
+		max_div *= FIELD_MAX(ESP32S3_UART_SCLK_DIV_NUM);
+
 	baud = uart_get_baud_rate(port, termios, old,
-				  port->uartclk / port_variant(port)->clkdiv_mask,
+				  port->uartclk / max_div,
 				  port->uartclk / 16);
 
 	spin_lock_irqsave(&port->lock, flags);