Commit 4bfe6341 authored by Anil Kumar's avatar Anil Kumar Committed by Benoit Cousson

ARM: dts: Add minimal DT support for DevKit8000

DevKit8000 is a beagle board clone from Timll, sold by
armkits.com. The DevKit8000 has RS232 serial port, LCD, DVI-D,
S-Video, Ethernet, SD/MMC, keyboard, camera, SPI, I2C, USB and
JTAG interface.

Add the basic DT support for devkit8000. It includes:
- twl4030 (PMIC)
- MMC1
- I2C1
- leds
Signed-off-by: default avatarAnil Kumar <anilk4.v@gmail.com>
Tested-by: default avatarThomas Weber <thomas@tomweber.eu>
Signed-off-by: default avatarBenoit Cousson <benoit.cousson@linaro.org>
parent 4e4ead73
......@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3430-sdp.dtb \
omap3-beagle.dtb \
omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-evm.dtb \
omap3-tobi.dtb \
......
/*
* Author: Anil Kumar <anilk4.v@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/include/ "omap3.dtsi"
/ {
model = "TimLL OMAP3 Devkit8000";
compatible = "timll,omap3-devkit8000", "ti,omap3";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
leds {
compatible = "gpio-leds";
heartbeat {
label = "devkit8000::led1";
gpios = <&gpio6 26 0>; /* 186 -> LED1 */
default-state = "on";
linux,default-trigger = "heartbeat";
};
mmc {
label = "devkit8000::led2";
gpios = <&gpio6 3 0>; /* 163 -> LED2 */
default-state = "on";
linux,default-trigger = "none";
};
usr {
label = "devkit8000::led3";
gpios = <&gpio6 4 0>; /* 164 -> LED3 */
default-state = "on";
linux,default-trigger = "usr";
};
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
};
};
&i2c2 {
status = "disabled";
};
&i2c3 {
status = "disabled";
};
/include/ "twl4030.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&wdt2 {
status = "disabled";
};
&mcbsp1 {
status = "disabled";
};
&mcbsp2 {
status = "disabled";
};
&mcbsp3 {
status = "disabled";
};
&mcbsp4 {
status = "disabled";
};
&mcbsp5 {
status = "disabled";
};
......@@ -110,6 +110,7 @@ MACHINE_END
static const char *omap3_gp_boards_compat[] __initdata = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",
NULL,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment