staging: comedi: addi_apci_1032: board has 32 digital inputs

This board always has 32 digital inputs. Remove the test when
initializing the subdevice.

Also, since this board is the only one supported by this driver,
remove the boardinfo about the digital inputs and just use the
data directly in the subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_1032.c

@@ -18,9 +18,6 @@ static const struct addi_board apci1032_boardtypes[] = {
 		.pc_EepromChip		= ADDIDATA_93C76,
 		.i_NbrDiChannel		= 32,
 		.interrupt		= v_APCI1032_Interrupt,
-		.di_config		= i_APCI1032_ConfigDigitalInput,
-		.di_read		= i_APCI1032_Read1DigitalInput,
-		.di_bits		= i_APCI1032_ReadMoreDigitalInput,
 	},
 };
 
@@ -165,22 +162,15 @@ static int apci1032_attach_pci(struct comedi_device *dev,
 
 	/*  Allocate and Initialise DI Subdevice Structures */
 	s = &dev->subdevices[2];
-	if (devpriv->s_EeParameters.i_NbrDiChannel) {
-		s->type = COMEDI_SUBD_DI;
-		s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_COMMON;
-		s->n_chan = devpriv->s_EeParameters.i_NbrDiChannel;
-		s->maxdata = 1;
-		s->len_chanlist =
-			devpriv->s_EeParameters.i_NbrDiChannel;
-		s->range_table = &range_digital;
-		s->io_bits = 0;	/* all bits input */
-		s->insn_config = this_board->di_config;
-		s->insn_read = this_board->di_read;
-		s->insn_write = this_board->di_write;
-		s->insn_bits = this_board->di_bits;
-	} else {
-		s->type = COMEDI_SUBD_UNUSED;
-	}
+	s->type		= COMEDI_SUBD_DI;
+	s->subdev_flags	= SDF_READABLE;
+	s->n_chan	= 32;
+	s->maxdata	= 1;
+	s->len_chanlist	= 32;
+	s->range_table	= &range_digital;
+	s->insn_config	= i_APCI1032_ConfigDigitalInput;
+	s->insn_read	= i_APCI1032_Read1DigitalInput;
+	s->insn_bits	= i_APCI1032_ReadMoreDigitalInput;
 
 	/*  Allocate and Initialise DO Subdevice Structures */
 	s = &dev->subdevices[3];