Commit 4c6c914e authored by Uwe Koziolek's avatar Uwe Koziolek Committed by Bartlomiej Zolnierkiewicz

sis5513: adding PCI-ID

The SiS966 has one additional PCI-ID 1180.

If the chipset is using this PCI-ID, the primary channel is connected to the
first PATA-port. The secondary channel is connected to SATA-ports in IDE
emulation mode.  The legacy IO-ports are used.

The including of the PCI-ID into pata_sis is not sufficient, because the legacy
driver in drivers/ide is initialized before pata_sis.
Signed-off-by: default avatarUwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 95511ad4
...@@ -872,6 +872,7 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi ...@@ -872,6 +872,7 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi
static struct pci_device_id sis5513_pci_tbl[] = { static struct pci_device_id sis5513_pci_tbl[] = {
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, { PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5518, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_1180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ 0, }, { 0, },
}; };
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl); MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
......
...@@ -661,6 +661,7 @@ ...@@ -661,6 +661,7 @@
#define PCI_DEVICE_ID_SI_965 0x0965 #define PCI_DEVICE_ID_SI_965 0x0965
#define PCI_DEVICE_ID_SI_966 0x0966 #define PCI_DEVICE_ID_SI_966 0x0966
#define PCI_DEVICE_ID_SI_968 0x0968 #define PCI_DEVICE_ID_SI_968 0x0968
#define PCI_DEVICE_ID_SI_1180 0x1180
#define PCI_DEVICE_ID_SI_5511 0x5511 #define PCI_DEVICE_ID_SI_5511 0x5511
#define PCI_DEVICE_ID_SI_5513 0x5513 #define PCI_DEVICE_ID_SI_5513 0x5513
#define PCI_DEVICE_ID_SI_5517 0x5517 #define PCI_DEVICE_ID_SI_5517 0x5517
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment