Commit 4c9164b9 authored by Ralf Baechle's avatar Ralf Baechle

MIPS: SEAD3: Nuke remaining I2C bits.

With no I2C driver available, keeping the platform device registration
makes no sense just as keeping the code to instantiage the I2C devices.
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 968c94bc
......@@ -13,8 +13,7 @@ obj-y := sead3-lcd.o sead3-display.o sead3-init.o \
sead3-platform.o sead3-reset.o \
sead3-setup.o sead3-time.o
obj-y += sead3-i2c-dev.o sead3-i2c.o \
leds-sead3.o sead3-leds.o
obj-y += leds-sead3.o sead3-leds.o
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
obj-$(CONFIG_USB_EHCI_HCD) += sead3-ehci.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
#include <linux/i2c.h>
static struct i2c_board_info __initdata sead3_i2c_devices[] = {
{
I2C_BOARD_INFO("adt7476", 0x2c),
.irq = 0,
},
{
I2C_BOARD_INFO("m41t80", 0x68),
.irq = 0,
},
};
static int __init sead3_i2c_init(void)
{
int err;
err = i2c_register_board_info(0, sead3_i2c_devices,
ARRAY_SIZE(sead3_i2c_devices));
if (err < 0)
pr_err("sead3-i2c-dev: cannot register board I2C devices\n");
return err;
}
arch_initcall(sead3_i2c_init);
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
struct resource sead3_i2c_resources[] = {
{
.start = 0x805200,
.end = 0x8053ff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sead3_i2c_device = {
.name = "sead3-i2c",
.id = 0,
.num_resources = ARRAY_SIZE(sead3_i2c_resources),
.resource = sead3_i2c_resources,
};
static int __init sead3_i2c_init(void)
{
return platform_device_register(&sead3_i2c_device);
}
device_initcall(sead3_i2c_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment