staging: rtl8723bs: Fix line length

Fix some line length errors.
Co-developed-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Annika Knepper <av91obul@stud.informatik.uni-erlangen.de>
Signed-off-by: Andreas Hellmich <dy26hofu@stud.informatik.uni-erlangen.de>
Link: https://lore.kernel.org/r/20191129093939.2782-2-dy26hofu@stud.informatik.uni-erlangen.deSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723bs/core/rtw_mlme_ext.c

@@ -207,10 +207,10 @@ static RT_CHANNEL_PLAN_MAP	RTW_ChannelPlanMap[RT_CHANNEL_DOMAIN_MAX] = {
 	{0x02, 0x1F},	/* 0x57, RT_CHANNEL_DOMAIN_FCC1_FCC10 */
 };
 
-static RT_CHANNEL_PLAN_MAP	RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02}; /* use the combination for max channel numbers */
+ /* use the combination for max channel numbers */
+static RT_CHANNEL_PLAN_MAP RTW_CHANNEL_PLAN_MAP_REALTEK_DEFINE = {0x03, 0x02};
 
-/*
- * Search the @param ch in given @param ch_set
+/* Search the @param ch in given @param ch_set
  * @ch_set: the given channel set
  * @ch: the given channel number
  *
@@ -229,8 +229,7 @@ int rtw_ch_set_search_ch(RT_CHANNEL_INFO *ch_set, const u32 ch)
 	return i;
 }
 
-/*
- * Check the @param ch is fit with setband setting of @param adapter
+/* Check the @param ch is fit with setband setting of @param adapter
  * @adapter: the given adapter
  * @ch: the given channel number
  *
@@ -3356,9 +3355,11 @@ void issue_assocreq(struct adapter *padapter)
 					(!memcmp(pIE->data, WPS_OUI, 4))) {
 				vs_ie_length = pIE->Length;
 				if ((!padapter->registrypriv.wifi_spec) && (!memcmp(pIE->data, WPS_OUI, 4))) {
-					/* Commented by Kurt 20110629 */
-					/* In some older APs, WPS handshake */
-					/* would be fail if we append vender extensions information to AP */
+					/* Commented by Kurt 20110629
+					 * In some older APs, WPS handshake
+					 * would be fail if we append vendor
+					 * extensions information to AP
+					 */
 
 					vs_ie_length = 14;
 				}
@@ -5379,8 +5380,7 @@ static void rtw_mlmeext_disconnect(struct adapter *padapter)
 
 	/* set_opmode_cmd(padapter, infra_client_with_mlme); */
 
-	/*
-	 * For safety, prevent from keeping macid sleep.
+	/* For safety, prevent from keeping macid sleep.
 	 * If we can sure all power mode enter/leave are paired,
 	 * this check can be removed.
 	 * Lucas@20131113
@@ -6385,7 +6385,9 @@ u8 sitesurvey_cmd_hdl(struct adapter *padapter, u8 *pbuf)
 		Save_DM_Func_Flag(padapter);
 		Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
 
-		/* config the initial gain under scanning, need to write the BB registers */
+		/* config the initial gain under scanning, need to write the BB
+		 * registers
+		 */
 		initialgain = 0x1e;
 
 		rtw_hal_set_hwreg(padapter, HW_VAR_INITIAL_GAIN, (u8 *)(&initialgain));

drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c

 // SPDX-License-Identifier: GPL-2.0
-/******************************************************************************
+/*****************************************************************************
  *
  * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
  *
@@ -82,7 +82,9 @@ static void setIqkMatrix_8723B(
 		/* if (RFPath == ODM_RF_PATH_A) */
 		switch (RFPath) {
 		case ODM_RF_PATH_A:
-			/* write new elements A, C, D to regC80 and regC94, element B is always 0 */
+			/* write new elements A, C, D to regC80 and regC94,
+			 * element B is always 0
+			 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XATxIQImbalance, bMaskDWord, value32);
 
@@ -93,7 +95,9 @@ static void setIqkMatrix_8723B(
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_ECCAThreshold, BIT24, value32);
 			break;
 		case ODM_RF_PATH_B:
-			/* write new elements A, C, D to regC88 and regC9C, element B is always 0 */
+			/* write new elements A, C, D to regC88 and regC9C,
+			 * element B is always 0
+			 */
 			value32 = (ele_D<<22)|((ele_C&0x3F)<<16)|ele_A;
 			PHY_SetBBReg(pDM_Odm->Adapter, rOFDM0_XBTxIQImbalance, bMaskDWord, value32);
 

drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c

@@ -3191,22 +3191,26 @@ static void rtl8723b_fill_default_txdesc(
 	if (bmcst)
 		ptxdesc->bmc = 1;
 
-	/*  2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
-	/*  (1) The sequence number of each non-Qos frame / broadcast / multicast / */
-	/*  mgnt frame should be controlled by Hw because Fw will also send null data */
-	/*  which we cannot control when Fw LPS enable. */
-	/*  --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
-	/*  (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
-	/*  (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */
-	/*  2010.06.23. Added by tynli. */
+	/* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
+	 * (1) The sequence number of each non-Qos frame / broadcast /
+	 * multicast / mgnt frame should be controlled by Hw because Fw
+	 * will also send null data which we cannot control when Fw LPS
+	 * enable.
+	 * --> default enable non-Qos data sequense number. 2010.06.23.
+	 * by tynli.
+	 * (2) Enable HW SEQ control for beacon packet, because we use
+	 * Hw beacon.
+	 * (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos
+	 * packets.
+	 * 2010.06.23. Added by tynli.
+	 */
 	if (!pattrib->qos_en) /*  Hw set sequence number */
 		ptxdesc->en_hwseq = 1; /*  HWSEQ_EN */
 }
 
-/*
- *Description:
+/* Description:
  *
- *Parameters:
+ * Parameters:
  *	pxmitframe	xmitframe
  *	pbuf		where to fill tx desc
  */
@@ -4329,8 +4333,7 @@ void GetHwReg8723B(struct adapter *padapter, u8 variable, u8 *val)
 	}
 }
 
-/*
- *Description:
+/* Description:
  *	Change default setting of specified variable.
  */
 u8 SetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)
@@ -4348,8 +4351,7 @@ u8 SetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, v
 	return bResult;
 }
 
-/*
- *Description:
+/* Description:
  *	Query setting of specified variable.
  */
 u8 GetHalDefVar8723B(struct adapter *padapter, enum HAL_DEF_VARIABLE variable, void *pval)