Commit 4d59bce4 authored by Jan Kara's avatar Jan Kara Committed by Mark Fasheh

quota: Keep which entries were set by SETQUOTA quotactl

Quota in a clustered environment needs to synchronize quota information
among cluster nodes. This means we have to occasionally update some
information in dquot from disk / network. On the other hand we have to
be careful not to overwrite changes administrator did via SETQUOTA.
So indicate in dquot->dq_flags which entries have been set by SETQUOTA
and quota format can clear these flags when it properly propagated
the changes.
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarMark Fasheh <mfasheh@suse.com>
parent db49d2df
......@@ -2010,25 +2010,33 @@ static int do_set_dqblk(struct dquot *dquot, struct if_dqblk *di)
if (di->dqb_valid & QIF_SPACE) {
dm->dqb_curspace = di->dqb_curspace;
check_blim = 1;
__set_bit(DQ_LASTSET_B + QIF_SPACE_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BLIMITS) {
dm->dqb_bsoftlimit = qbtos(di->dqb_bsoftlimit);
dm->dqb_bhardlimit = qbtos(di->dqb_bhardlimit);
check_blim = 1;
__set_bit(DQ_LASTSET_B + QIF_BLIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_INODES) {
dm->dqb_curinodes = di->dqb_curinodes;
check_ilim = 1;
__set_bit(DQ_LASTSET_B + QIF_INODES_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ILIMITS) {
dm->dqb_isoftlimit = di->dqb_isoftlimit;
dm->dqb_ihardlimit = di->dqb_ihardlimit;
check_ilim = 1;
__set_bit(DQ_LASTSET_B + QIF_ILIMITS_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_BTIME)
if (di->dqb_valid & QIF_BTIME) {
dm->dqb_btime = di->dqb_btime;
if (di->dqb_valid & QIF_ITIME)
__set_bit(DQ_LASTSET_B + QIF_BTIME_B, &dquot->dq_flags);
}
if (di->dqb_valid & QIF_ITIME) {
dm->dqb_itime = di->dqb_itime;
__set_bit(DQ_LASTSET_B + QIF_ITIME_B, &dquot->dq_flags);
}
if (check_blim) {
if (!dm->dqb_bsoftlimit || dm->dqb_curspace < dm->dqb_bsoftlimit) {
......
......@@ -80,12 +80,21 @@
* Quota structure used for communication with userspace via quotactl
* Following flags are used to specify which fields are valid
*/
#define QIF_BLIMITS 1
#define QIF_SPACE 2
#define QIF_ILIMITS 4
#define QIF_INODES 8
#define QIF_BTIME 16
#define QIF_ITIME 32
enum {
QIF_BLIMITS_B = 0,
QIF_SPACE_B,
QIF_ILIMITS_B,
QIF_INODES_B,
QIF_BTIME_B,
QIF_ITIME_B,
};
#define QIF_BLIMITS (1 << QIF_BLIMITS_B)
#define QIF_SPACE (1 << QIF_SPACE_B)
#define QIF_ILIMITS (1 << QIF_ILIMITS_B)
#define QIF_INODES (1 << QIF_INODES_B)
#define QIF_BTIME (1 << QIF_BTIME_B)
#define QIF_ITIME (1 << QIF_ITIME_B)
#define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS)
#define QIF_USAGE (QIF_SPACE | QIF_INODES)
#define QIF_TIMES (QIF_BTIME | QIF_ITIME)
......@@ -242,6 +251,11 @@ extern struct dqstats dqstats;
#define DQ_FAKE_B 3 /* no limits only usage */
#define DQ_READ_B 4 /* dquot was read into memory */
#define DQ_ACTIVE_B 5 /* dquot is active (dquot_release not called) */
#define DQ_LASTSET_B 6 /* Following 6 bits (see QIF_) are reserved\
* for the mask of entries set via SETQUOTA\
* quotactl. They are set under dq_data_lock\
* and the quota format handling dquot can\
* clear them when it sees fit. */
struct dquot {
struct hlist_node dq_hash; /* Hash list in memory */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment