Commit 4d5e6fd4 authored by Mike Frysinger's avatar Mike Frysinger

Blackfin: bf533-ezkit: add resources for FISP devices

The BF533-EZKIT has two Flash In-System Programming devices hooked up to
the async memory bus, so add resources for the primary flashes and the
SRAMs on the devices.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent 2780cd64
...@@ -32,6 +32,7 @@ ...@@ -32,6 +32,7 @@
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/mtd/mtd.h> #include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h> #include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/flash.h> #include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
...@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = { ...@@ -86,6 +87,101 @@ static struct platform_device smc91x_device = {
}; };
#endif #endif
#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
static const char *map_probes[] = {
"stm_flash",
NULL,
};
static struct platdata_mtd_ram stm_pri_data_a = {
.mapname = "Flash A Primary",
.map_probes = map_probes,
.bankwidth = 2,
};
static struct resource stm_pri_resource_a = {
.start = 0x20000000,
.end = 0x200fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device stm_pri_device_a = {
.name = "mtd-ram",
.id = 0,
.dev = {
.platform_data = &stm_pri_data_a,
},
.num_resources = 1,
.resource = &stm_pri_resource_a,
};
static struct platdata_mtd_ram stm_pri_data_b = {
.mapname = "Flash B Primary",
.map_probes = map_probes,
.bankwidth = 2,
};
static struct resource stm_pri_resource_b = {
.start = 0x20100000,
.end = 0x201fffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device stm_pri_device_b = {
.name = "mtd-ram",
.id = 4,
.dev = {
.platform_data = &stm_pri_data_b,
},
.num_resources = 1,
.resource = &stm_pri_resource_b,
};
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
static struct platdata_mtd_ram sram_data_a = {
.mapname = "Flash A SRAM",
.bankwidth = 2,
};
static struct resource sram_resource_a = {
.start = 0x20240000,
.end = 0x2024ffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device sram_device_a = {
.name = "mtd-ram",
.id = 8,
.dev = {
.platform_data = &sram_data_a,
},
.num_resources = 1,
.resource = &sram_resource_a,
};
static struct platdata_mtd_ram sram_data_b = {
.mapname = "Flash B SRAM",
.bankwidth = 2,
};
static struct resource sram_resource_b = {
.start = 0x202c0000,
.end = 0x202cffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device sram_device_b = {
.name = "mtd-ram",
.id = 9,
.dev = {
.platform_data = &sram_data_b,
},
.num_resources = 1,
.resource = &sram_resource_b,
};
#endif
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = { static struct mtd_partition bfin_spi_flash_partitions[] = {
{ {
...@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = { ...@@ -357,6 +453,16 @@ static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc, &bfin_dpmc,
#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
&stm_pri_device_a,
&stm_pri_device_b,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
&sram_device_a,
&sram_device_b,
#endif
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
&smc91x_device, &smc91x_device,
#endif #endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment