Commit 4dba72fd authored by Ido Schimmel's avatar Ido Schimmel Committed by David S. Miller

selftests: forwarding: Add a test case for ARP suppression

ARP suppression allows the Linux bridge to answer ARP requests on behalf
of remote hosts. It reduces the amount of packets a VTEP needs to flood.

This test verifies that ARP suppression on / off works when a neighbour
exists and when it does not exist. It does so by sending an ARP request
from a host connected to one VTEP and checking whether it was received
by a second VTEP.
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Reviewed-by: default avatarPetr Machata <petrm@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 438a4f56
......@@ -94,10 +94,13 @@
ALL_TESTS="
ping_ipv4
arp_decap
arp_suppression
"
NUM_NETIFS=6
source lib.sh
require_command $ARPING
hx_create()
{
local vrf_name=$1; shift
......@@ -483,6 +486,77 @@ arp_decap()
dev vlan20 extern_learn
}
arp_suppression_compare()
{
local expect=$1; shift
local actual=$(in_ns ns1 tc_rule_stats_get vx10 1 ingress)
(( expect == actual ))
check_err $? "expected $expect arps got $actual"
}
arp_suppression()
{
ip link set dev vx10 type bridge_slave neigh_suppress on
in_ns ns1 tc qdisc add dev vx10 clsact
in_ns ns1 tc filter add dev vx10 ingress proto arp pref 1 handle 101 \
flower dst_mac ff:ff:ff:ff:ff:ff arp_tip 10.1.1.102 arp_op \
request action pass
# The neighbour is configured on the SVI and ARP suppression is on, so
# the ARP request should be suppressed
RET=0
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 0
log_test "neigh_suppress: on / neigh exists: yes"
# Delete the neighbour from the the SVI. A single ARP request should be
# received by the remote VTEP
RET=0
ip neigh del 10.1.1.102 dev vlan10
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 1
log_test "neigh_suppress: on / neigh exists: no"
# Turn off ARP suppression and make sure ARP is not suppressed,
# regardless of neighbour existence on the SVI
RET=0
ip neigh del 10.1.1.102 dev vlan10 &> /dev/null
ip link set dev vx10 type bridge_slave neigh_suppress off
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 2
log_test "neigh_suppress: off / neigh exists: no"
RET=0
ip neigh add 10.1.1.102 lladdr $(in_ns ns1 mac_get w2) nud noarp \
dev vlan10 extern_learn
$ARPING -I $h1 -fqb -c 1 -w 1 10.1.1.102
check_err $? "arping failed"
arp_suppression_compare 3
log_test "neigh_suppress: off / neigh exists: yes"
in_ns ns1 tc qdisc del dev vx10 clsact
}
trap cleanup EXIT
setup_prepare
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment