Commit 4e74663c authored by Dominik Brodowski's avatar Dominik Brodowski Committed by Dave Jones

[CPUFREQ] p4-clockmod: add more CPUs

Several more Intel CPUs are now capable using the p4-clockmod cpufreq
driver. As it is of limited use most of the time, print a big bold warning
if a better cpufreq driver might be available.
Signed-off-by: default avatarDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: default avatarDave Jones <davej@redhat.com>
parent e08f5f5b
......@@ -163,29 +163,27 @@ static int cpufreq_p4_verify(struct cpufreq_policy *policy)
static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if ((c->x86 == 0x06) && (c->x86_model == 0x09)) {
/* Pentium M (Banias) */
printk(KERN_WARNING PFX "Warning: Pentium M detected. "
"The speedstep_centrino module offers voltage scaling"
" in addition of frequency scaling. You should use "
"that instead of p4-clockmod, if possible.\n");
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
}
if ((c->x86 == 0x06) && (c->x86_model == 0x0D)) {
/* Pentium M (Dothan) */
printk(KERN_WARNING PFX "Warning: Pentium M detected. "
"The speedstep_centrino module offers voltage scaling"
" in addition of frequency scaling. You should use "
"that instead of p4-clockmod, if possible.\n");
/* on P-4s, the TSC runs with constant frequency independent whether
* throttling is active or not. */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
"The acpi-cpufreq module offers voltage scaling"
" in addition of frequency scaling. You should use "
"that instead of p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
case 0x0D: /* Pentium M (Dothan) */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
/* fall through */
case 0x09: /* Pentium M (Banias) */
return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
}
}
if (c->x86 != 0xF) {
printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <linux@brodo.de>\n");
printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n");
return 0;
}
......
......@@ -123,6 +123,36 @@ static unsigned int pentiumM_get_frequency(void)
return (msr_tmp * 100 * 1000);
}
static unsigned int pentium_core_get_frequency(void)
{
u32 fsb = 0;
u32 msr_lo, msr_tmp;
rdmsr(MSR_FSB_FREQ, msr_lo, msr_tmp);
/* see table B-2 of 24547212.pdf */
switch (msr_lo & 0x07) {
case 5:
fsb = 400;
break;
case 1:
fsb = 533;
break;
case 3:
fsb = 667;
break;
default:
printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
}
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
dprintk("PCORE - MSR_IA32_EBL_CR_POWERON: 0x%x 0x%x\n", msr_lo, msr_tmp);
msr_tmp = (msr_lo >> 22) & 0x1f;
dprintk("bits 22-26 are 0x%x, speed is %u\n", msr_tmp, (msr_tmp * fsb * 1000));
return (msr_tmp * fsb * 1000);
}
static unsigned int pentium4_get_frequency(void)
{
......@@ -174,6 +204,8 @@ static unsigned int pentium4_get_frequency(void)
unsigned int speedstep_get_processor_frequency(unsigned int processor)
{
switch (processor) {
case SPEEDSTEP_PROCESSOR_PCORE:
return pentium_core_get_frequency();
case SPEEDSTEP_PROCESSOR_PM:
return pentiumM_get_frequency();
case SPEEDSTEP_PROCESSOR_P4D:
......
......@@ -22,6 +22,7 @@
* the speedstep_get_processor_frequency() call. */
#define SPEEDSTEP_PROCESSOR_PM 0xFFFFFF03 /* Pentium M */
#define SPEEDSTEP_PROCESSOR_P4D 0xFFFFFF04 /* desktop P4 */
#define SPEEDSTEP_PROCESSOR_PCORE 0xFFFFFF05 /* Core */
/* speedstep states -- only two of them */
......
......@@ -95,6 +95,8 @@ static inline void wrmsrl (unsigned long msr, unsigned long long val)
#define MSR_P6_PERFCTR0 0xc1
#define MSR_P6_PERFCTR1 0xc2
#define MSR_FSB_FREQ 0xcd
#define MSR_IA32_BBL_CR_CTL 0x119
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment