extcon: arizona: Enable basic headphone identification

Use the headphone detection to identify if the accessory is a headphone or
line load. There are two different revisions of the IP with different
register layouts, support both.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com>

drivers/mfd/wm5102-tables.c

@@ -1106,6 +1106,8 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ACCESSORY_DETECT_MODE_1:
 	case ARIZONA_HEADPHONE_DETECT_1:
 	case ARIZONA_HEADPHONE_DETECT_2:
+	case ARIZONA_HP_DACVAL:
+	case ARIZONA_MICD_CLAMP_CONTROL:
 	case ARIZONA_MIC_DETECT_1:
 	case ARIZONA_MIC_DETECT_2:
 	case ARIZONA_MIC_DETECT_3:
@@ -1875,6 +1877,7 @@ static bool wm5102_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
 	case ARIZONA_HEADPHONE_DETECT_2:
+	case ARIZONA_HP_DACVAL:
 	case ARIZONA_MIC_DETECT_3:
 		return true;
 	default:

include/linux/mfd/arizona/registers.h

@@ -119,6 +119,7 @@
 #define ARIZONA_ACCESSORY_DETECT_MODE_1          0x293
 #define ARIZONA_HEADPHONE_DETECT_1               0x29B
 #define ARIZONA_HEADPHONE_DETECT_2               0x29C
+#define ARIZONA_HP_DACVAL			 0x29F
 #define ARIZONA_MICD_CLAMP_CONTROL               0x2A2
 #define ARIZONA_MIC_DETECT_1                     0x2A3
 #define ARIZONA_MIC_DETECT_2                     0x2A4
@@ -2036,6 +2037,9 @@
 /*
  * R667 (0x29B) - Headphone Detect 1
  */
+#define ARIZONA_HP_IMPEDANCE_RANGE_MASK          0x0600  /* HP_IMPEDANCE_RANGE - [10:9] */
+#define ARIZONA_HP_IMPEDANCE_RANGE_SHIFT              9  /* HP_IMPEDANCE_RANGE - [10:9] */
+#define ARIZONA_HP_IMPEDANCE_RANGE_WIDTH              2  /* HP_IMPEDANCE_RANGE - [10:9] */
 #define ARIZONA_HP_STEP_SIZE                     0x0100  /* HP_STEP_SIZE */
 #define ARIZONA_HP_STEP_SIZE_MASK                0x0100  /* HP_STEP_SIZE */
 #define ARIZONA_HP_STEP_SIZE_SHIFT                    8  /* HP_STEP_SIZE */
@@ -2070,6 +2074,14 @@
 #define ARIZONA_HP_LVL_SHIFT                          0  /* HP_LVL - [6:0] */
 #define ARIZONA_HP_LVL_WIDTH                          7  /* HP_LVL - [6:0] */
 
+#define ARIZONA_HP_DONE_B                        0x8000  /* HP_DONE */
+#define ARIZONA_HP_DONE_B_MASK                   0x8000  /* HP_DONE */
+#define ARIZONA_HP_DONE_B_SHIFT                      15  /* HP_DONE */
+#define ARIZONA_HP_DONE_B_WIDTH                       1  /* HP_DONE */
+#define ARIZONA_HP_LVL_B_MASK                    0x7FFF  /* HP_LVL - [14:0] */
+#define ARIZONA_HP_LVL_B_SHIFT                        0  /* HP_LVL - [14:0] */
+#define ARIZONA_HP_LVL_B_WIDTH                       15  /* HP_LVL - [14:0] */
+
 /*
  * R674 (0x2A2) - MICD clamp control
  */