ath9k: Update AR955x initvals

This patch disables HW peak detect calibration for
AR955x, since it is problematic on a few boards.
Instead, manual calibration will be done in the
driver.
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h

@@ -63,7 +63,7 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = {
 	{0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c},
 	{0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce},
 	{0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021},
-	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10822, 0xcfa10822},
+	{0x00009e3c, 0xcfa10820, 0xcfa10820, 0xcfa10820, 0xcfa10820},
 	{0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27},
 	{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
 	{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
@@ -83,7 +83,7 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = {
 	{0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010},
 	{0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110},
 	{0x0000a28c, 0x00022222, 0x00022222, 0x00022222, 0x00022222},
-	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18},
+	{0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18},
 	{0x0000a2cc, 0x18c50033, 0x18c43433, 0x18c41033, 0x18c44c33},
 	{0x0000a2d0, 0x00041982, 0x00041982, 0x00041982, 0x00041982},
 	{0x0000a2d8, 0x7999a83b, 0x7999a83b, 0x7999a83b, 0x7999a83b},