Blackfin arch: add SDIO host driver platform data

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

arch/blackfin/include/asm/bfin_sdh.h

+/*
+ * bfin_sdh.h - Blackfin SDH definitions
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_SDH_H__
+#define __BFIN_SDH_H__
+
+struct bfin_sd_host {
+	int dma_chan;
+	int irq_int0;
+	int irq_int1;
+	u16 pin_req[7];
+};
+
+#endif

arch/blackfin/mach-bf518/boards/ezbrd.c

@@ -44,6 +44,7 @@
 #include <asm/reboot.h>
 #include <asm/portmux.h>
 #include <asm/dpmc.h>
+#include <asm/bfin_sdh.h>
 #include <linux/spi/ad7877.h>
 
 /*
@@ -522,6 +523,23 @@ static struct platform_device bfin_device_gpiokeys = {
 };
 #endif
 
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_RSI,
+	.irq_int0 = IRQ_RSI_INT0,
+	.pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
+};
+
+static struct platform_device bf51x_sdh_device = {
+	.name = "bfin-sdh",
+	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
+};
+#endif
+
 static struct resource bfin_gpios_resources = {
 	.start = 0,
 	.end   = MAX_BLACKFIN_GPIOS - 1,
@@ -600,6 +618,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_device_gpiokeys,
 #endif
 
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+	&bf51x_sdh_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&ezbrd_flash_device,
 #endif

arch/blackfin/mach-bf548/boards/ezkit.c

@@ -45,6 +45,7 @@
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
+#include <asm/bfin_sdh.h>
 #include <mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -504,9 +505,19 @@ static struct platform_device bf5xx_nand_device = {
 #endif
 
 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
+
+static struct bfin_sd_host bfin_sdh_data = {
+	.dma_chan = CH_SDH,
+	.irq_int0 = IRQ_SDH_MASK0,
+	.pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0},
+};
+
 static struct platform_device bf54x_sdh_device = {
 	.name = "bfin-sdh",
 	.id = 0,
+	.dev = {
+		.platform_data = &bfin_sdh_data,
+	},
 };
 #endif