Merge tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6

Pull battery update, part 2, from Anton Vorontsov:
 "These are left overs that I didn't have time to review/apply before
  the merge window opened.  I didn't want to "spoil" the first pull
  request with these late patches, so they were not included:

   - A small patch for the RX51 OMAP board (Nokia N900 phone), the patch
     creates a battery monitor device instance, so that it can be
     probed.  It was acked by the OMAP maintainer;

   - A couple of late bug fixes for the charger-manager: corrects corner
     cases for the battery full handling."

* tag 'for-v3.8-part2' of git://git.infradead.org/battery-2.6:
  charger-manager: Fix bug when check dropped voltage after fullbatt event
  charger-manager: Fix bug related to checking fully charged state of battery
  ARM: OMAP: rx51: Register platform device for rx51_battery

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -256,6 +256,11 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
 	},
 };
 
+static struct platform_device rx51_battery_device = {
+	.name	= "rx51-battery",
+	.id	= -1,
+};
+
 static void rx51_charger_set_power(bool on)
 {
 	gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on);
@@ -277,6 +282,7 @@ static void __init rx51_charger_init(void)
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
 		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
+	platform_device_register(&rx51_battery_device);
 	platform_device_register(&rx51_charger_device);
 }
 

drivers/power/charger-manager.c

@@ -239,44 +239,37 @@ static bool is_full_charged(struct charger_manager *cm)
 	int uV;
 
 	/* If there is no battery, it cannot be charged */
-	if (!is_batt_present(cm)) {
-		val.intval = 0;
-		goto out;
-	}
+	if (!is_batt_present(cm))
+		return false;
 
 	if (cm->fuel_gauge && desc->fullbatt_full_capacity > 0) {
+		val.intval = 0;
+
 		/* Not full if capacity of fuel gauge isn't full */
 		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
 				POWER_SUPPLY_PROP_CHARGE_FULL, &val);
-		if (!ret && val.intval > desc->fullbatt_full_capacity) {
-			val.intval = 1;
-			goto out;
-		}
+		if (!ret && val.intval > desc->fullbatt_full_capacity)
+			return true;
 	}
 
 	/* Full, if it's over the fullbatt voltage */
 	if (desc->fullbatt_uV > 0) {
 		ret = get_batt_uV(cm, &uV);
-		if (!ret && uV >= desc->fullbatt_uV) {
-			val.intval = 1;
-			goto out;
-		}
+		if (!ret && uV >= desc->fullbatt_uV)
+			return true;
 	}
 
 	/* Full, if the capacity is more than fullbatt_soc */
 	if (cm->fuel_gauge && desc->fullbatt_soc > 0) {
+		val.intval = 0;
+
 		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
 				POWER_SUPPLY_PROP_CAPACITY, &val);
-		if (!ret && val.intval >= desc->fullbatt_soc) {
-			val.intval = 1;
-			goto out;
-		}
+		if (!ret && val.intval >= desc->fullbatt_soc)
+			return true;
 	}
 
-	val.intval = 0;
-
-out:
-	return val.intval ? true : false;
+	return false;
 }
 
 /**
@@ -489,8 +482,9 @@ static void fullbatt_vchk(struct work_struct *work)
 		return;
 	}
 
-	diff = desc->fullbatt_uV;
-	diff -= batt_uV;
+	diff = desc->fullbatt_uV - batt_uV;
+	if (diff < 0)
+		return;
 
 	dev_info(cm->dev, "VBATT dropped %duV after full-batt.\n", diff);