Commit 5047201b authored by Manuel Lauss's avatar Manuel Lauss Committed by Ralf Baechle

MIPS: Alchemy: Remove USB_DEV_REQ_INT prioritization hack

The Alchemy hardware provides a method to prioritize interrupts
on a controller by assigning them to a differenct core request line.
Assign usb device request interrupt to IC0 Request 0 (which has
highest priority in the core and the dispatcher) and others to
Request 1.  The explicit check for usb device request occurrence
should be obsolete now.
Signed-off-by: default avatarManuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 0273b4ef
......@@ -39,11 +39,18 @@
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
/* NOTE on interrupt priorities: The original writers of this code said:
*
* Because of the tight timing of SETUP token to reply transactions,
* the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
* needs the highest priority.
*/
/* per-processor fixed function irqs */
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
int im_request; /* set 1 to get higher priority */
} au1xxx_ic0_map[] __initdata = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
......@@ -63,14 +70,14 @@ struct au1xxx_irqmap {
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
......@@ -97,12 +104,12 @@ struct au1xxx_irqmap {
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
......@@ -129,14 +136,14 @@ struct au1xxx_irqmap {
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
......@@ -163,13 +170,13 @@ struct au1xxx_irqmap {
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 },
{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
......@@ -191,7 +198,7 @@ struct au1xxx_irqmap {
{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
......@@ -507,7 +514,7 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
asmlinkage void plat_irq_dispatch(void)
{
unsigned int pending = read_c0_status() & read_c0_cause();
unsigned long s, off, bit;
unsigned long s, off;
if (pending & CAUSEF_IP7) {
do_IRQ(MIPS_CPU_IRQ_BASE + 7);
......@@ -527,25 +534,12 @@ asmlinkage void plat_irq_dispatch(void)
} else
goto spurious;
bit = 0;
s = au_readl(s);
if (unlikely(!s)) {
spurious:
spurious_interrupt();
return;
}
#ifdef AU1000_USB_DEV_REQ_INT
/*
* Because of the tight timing of SETUP token to reply
* transactions, the USB devices-side packet complete
* interrupt needs the highest priority.
*/
bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
if ((pending & CAUSEF_IP2) && (s & bit)) {
do_IRQ(AU1000_USB_DEV_REQ_INT);
return;
}
#endif
do_IRQ(__ffs(s) + off);
}
......@@ -566,11 +560,11 @@ static void __init setup_irqmap(struct au1xxx_irqmap *map, int count)
if (irq_nr >= AU1000_INTC1_INT_BASE) {
bit = irq_nr - AU1000_INTC1_INT_BASE;
if (map[count].im_request)
au_writel(1 << bit, IC1_ASSIGNCLR);
au_writel(1 << bit, IC1_ASSIGNSET);
} else {
bit = irq_nr - AU1000_INTC0_INT_BASE;
if (map[count].im_request)
au_writel(1 << bit, IC0_ASSIGNCLR);
au_writel(1 << bit, IC0_ASSIGNSET);
}
au1x_ic_settype(irq_nr, map[count].im_type);
......@@ -588,7 +582,7 @@ void __init arch_init_irq(void)
au_writel(0xffffffff, IC0_CFG1CLR);
au_writel(0xffffffff, IC0_CFG2CLR);
au_writel(0xffffffff, IC0_MASKCLR);
au_writel(0xffffffff, IC0_ASSIGNSET);
au_writel(0xffffffff, IC0_ASSIGNCLR);
au_writel(0xffffffff, IC0_WAKECLR);
au_writel(0xffffffff, IC0_SRCSET);
au_writel(0xffffffff, IC0_FALLINGCLR);
......@@ -599,7 +593,7 @@ void __init arch_init_irq(void)
au_writel(0xffffffff, IC1_CFG1CLR);
au_writel(0xffffffff, IC1_CFG2CLR);
au_writel(0xffffffff, IC1_MASKCLR);
au_writel(0xffffffff, IC1_ASSIGNSET);
au_writel(0xffffffff, IC1_ASSIGNCLR);
au_writel(0xffffffff, IC1_WAKECLR);
au_writel(0xffffffff, IC1_SRCSET);
au_writel(0xffffffff, IC1_FALLINGCLR);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment