[media] saa7164: Add Digital TV support for the HVR2255 and HVR2205

Adding support for the Hauppauge HVR2255 and Hauppauge HVR2205
PCIe cards. Digital TV for DVB-T and ATSC/US-Cable is known to
work. Support for analog RF tuners does not work due to
a lack of analog support in the upstream SI2157 driver.
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7164/saa7164-cards.c

@@ -30,6 +30,7 @@
  * attached I2C devices, so we can simplify the virtual i2c mechansms
  * and keep the -i2c.c implementation clean.
  */
+#define REGLEN_0bit	0
 #define REGLEN_8bit	1
 #define REGLEN_16bit	2
 
@@ -499,6 +500,144 @@ struct saa7164_board saa7164_boards[] = {
 			.i2c_reg_len	= REGLEN_8bit,
 		} },
 	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255proto] = {
+		.name		= "Hauppauge WinTV-HVR2255(proto)",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x24,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x26,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2255] = {
+		.name		= "Hauppauge WinTV-HVR2255",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xb2 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "LGDT3306-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x1c >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2205] = {
+		.name		= "Hauppauge WinTV-HVR2205",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x28,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x06,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc8 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x25,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "SI2157-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_0bit,
+		}, {
+			.id		= 0x27,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "SI2168-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xcc >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
 };
 const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);
 
@@ -546,6 +685,21 @@ struct saa7164_subid saa7164_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8953,
 		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_5,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf111,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255,
+		/* Prototype card left here for documenation purposes.
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2255proto,
+		*/
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf123,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0xf120,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2205,
 	},
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -594,12 +748,26 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
 		/*
+		HVR2200 / HVR2250
 		GPIO 2: s5h1411 / tda10048-1 demod reset
 		GPIO 3: s5h1411 / tda10048-2 demod reset
 		GPIO 7: IRBlaster Zilog reset
 		 */
 
+		/* HVR2255
+		 * GPIO 2: lgdg3306-1 demod reset
+		 * GPIO 3: lgdt3306-2 demod reset
+		 */
+
+		/* HVR2205
+		 * GPIO 2: si2168-1 demod reset
+		 * GPIO 3: si2168-2 demod reset
+		 */
+
 		/* Reset parts by going in and out of reset */
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
 		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
@@ -647,6 +815,21 @@ static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
 		/* WinTV-HVR2200 (PCIe, Retail, half-height)
 		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
 		break;
+	case 151009:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, full-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151609:
+		/* First production board rev B2I6 */
+		/* WinTV-HVR2205 (PCIe, Retail, half-height bracket)
+		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */
+		break;
+	case 151061:
+		/* First production board rev B1I6 */
+		/* WinTV-HVR2255 (PCIe, Retail, full-height bracket)
+		 * ATSC/QAM (SI2157/LGDT3306) and basic analog, FM */
+		break;
 	default:
 		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
 			dev->name, tv.model);
@@ -676,6 +859,9 @@ void saa7164_card_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
 		hauppauge_eeprom(dev, &eeprom[0]);
 		break;
 	}

drivers/media/pci/saa7164/saa7164-dvb.c

@@ -24,6 +24,9 @@
 #include "tda10048.h"
 #include "tda18271.h"
 #include "s5h1411.h"
+#include "si2157.h"
+#include "si2168.h"
+#include "lgdt3306a.h"
 
 #define DRIVER_NAME "saa7164"
 
@@ -82,6 +85,64 @@ static struct s5h1411_config hauppauge_s5h1411_config = {
 	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
 };
 
+static struct lgdt3306a_config hauppauge_hvr2255a_config = {
+	.i2c_addr               = 0xb2 >> 1,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct lgdt3306a_config hauppauge_hvr2255b_config = {
+	.i2c_addr               = 0x1c >> 1,
+	.qam_if_khz             = 4000,
+	.vsb_if_khz             = 3250,
+	.deny_i2c_rptr          = 1, /* Disabled */
+	.spectral_inversion     = 0, /* Disabled */
+	.mpeg_mode              = LGDT3306A_MPEG_SERIAL,
+	.tpclk_edge             = LGDT3306A_TPCLK_RISING_EDGE,
+	.tpvalid_polarity       = LGDT3306A_TP_VALID_HIGH,
+	.xtalMHz                = 25, /* 24 or 25 */
+};
+
+static struct si2157_config hauppauge_hvr2255_tuner_config = {
+	.inversion = 0,
+};
+
+static int si2157_attach(struct saa7164_port *port, struct i2c_adapter *adapter,
+	struct dvb_frontend *fe, u8 addr8bit, struct si2157_config *cfg)
+{
+	struct i2c_board_info bi;
+	struct i2c_client *tuner;
+
+	cfg->fe = fe;
+
+	memset(&bi, 0, sizeof(bi));
+
+	strlcpy(bi.type, "si2157", I2C_NAME_SIZE);
+	bi.platform_data = cfg;
+	bi.addr = addr8bit >> 1;
+
+	request_module(bi.type);
+
+	tuner = i2c_new_device(adapter, &bi);
+	if (tuner == NULL || tuner->dev.driver == NULL)
+		return -ENODEV;
+
+	if (!try_module_get(tuner->dev.driver->owner)) {
+		i2c_unregister_device(tuner);
+		return -ENODEV;
+	}
+
+	port->i2c_client_tuner = tuner;
+
+	return 0;
+}
+
 static int saa7164_dvb_stop_port(struct saa7164_port *port)
 {
 	struct saa7164_dev *dev = port->dev;
@@ -242,14 +303,16 @@ static int saa7164_dvb_start_feed(struct dvb_demux_feed *feed)
 	if (!demux->dmx.frontend)
 		return -EINVAL;
 
-	mutex_lock(&dvb->lock);
-	if (dvb->feeding++ == 0) {
-		/* Start transport */
-		ret = saa7164_dvb_start_port(port);
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (dvb->feeding++ == 0) {
+			/* Start transport */
+			ret = saa7164_dvb_start_port(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
 	}
-	mutex_unlock(&dvb->lock);
-	dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
-		__func__, port->nr, dvb->feeding);
 
 	return ret;
 }
@@ -264,14 +327,16 @@ static int saa7164_dvb_stop_feed(struct dvb_demux_feed *feed)
 
 	dprintk(DBGLVL_DVB, "%s(port=%d)\n", __func__, port->nr);
 
-	mutex_lock(&dvb->lock);
-	if (--dvb->feeding == 0) {
-		/* Stop transport */
-		ret = saa7164_dvb_stop_streaming(port);
+	if (dvb) {
+		mutex_lock(&dvb->lock);
+		if (--dvb->feeding == 0) {
+			/* Stop transport */
+			ret = saa7164_dvb_stop_streaming(port);
+		}
+		mutex_unlock(&dvb->lock);
+		dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
+			__func__, port->nr, dvb->feeding);
 	}
-	mutex_unlock(&dvb->lock);
-	dprintk(DBGLVL_DVB, "%s(port=%d) now feeding = %d\n",
-		__func__, port->nr, dvb->feeding);
 
 	return ret;
 }
@@ -425,6 +490,7 @@ int saa7164_dvb_unregister(struct saa7164_port *port)
 	struct saa7164_dev *dev = port->dev;
 	struct saa7164_buffer *b;
 	struct list_head *c, *n;
+	struct i2c_client *client;
 
 	dprintk(DBGLVL_DVB, "%s()\n", __func__);
 
@@ -443,6 +509,20 @@ int saa7164_dvb_unregister(struct saa7164_port *port)
 	if (dvb->frontend == NULL)
 		return 0;
 
+	/* remove I2C client for tuner */
+	client = port->i2c_client_tuner;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
+	/* remove I2C client for demodulator */
+	client = port->i2c_client_demod;
+	if (client) {
+		module_put(client->dev.driver->owner);
+		i2c_unregister_device(client);
+	}
+
 	dvb_net_release(&dvb->net);
 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
@@ -462,6 +542,12 @@ int saa7164_dvb_register(struct saa7164_port *port)
 	struct saa7164_dev *dev = port->dev;
 	struct saa7164_dvb *dvb = &port->dvb;
 	struct saa7164_i2c *i2c_bus = NULL;
+	struct si2168_config si2168_config;
+	struct si2157_config si2157_config;
+	struct i2c_adapter *adapter;
+	struct i2c_board_info info;
+	struct i2c_client *client_demod;
+	struct i2c_client *client_tuner;
 	int ret;
 
 	dprintk(DBGLVL_DVB, "%s()\n", __func__);
@@ -527,6 +613,118 @@ int saa7164_dvb_register(struct saa7164_port *port)
 			}
 		}
 
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255proto:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2255:
+		i2c_bus = &dev->i2c_bus[2];
+
+		if (port->nr == 0) {
+			port->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_hvr2255a_config, &i2c_bus->i2c_adap);
+		} else {
+			port->dvb.frontend = dvb_attach(lgdt3306a_attach,
+				&hauppauge_hvr2255b_config, &i2c_bus->i2c_adap);
+		}
+
+		if (port->dvb.frontend != NULL) {
+
+			if (port->nr == 0) {
+				si2157_attach(port, &dev->i2c_bus[0].i2c_adap, port->dvb.frontend,
+					0xc0, &hauppauge_hvr2255_tuner_config);
+			} else {
+				si2157_attach(port, &dev->i2c_bus[1].i2c_adap, port->dvb.frontend,
+					0xc0, &hauppauge_hvr2255_tuner_config);
+			}
+		}
+		break;
+	case SAA7164_BOARD_HAUPPAUGE_HVR2205:
+
+		if (port->nr == 0) {
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &port->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0xc8 >> 1;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_device(&dev->i2c_bus[2].i2c_adap, &info);
+			if (client_demod == NULL || client_demod->dev.driver == NULL) {
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = port->dvb.frontend;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0xc0 >> 1;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
+			if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+		} else {
+			/* attach frontend */
+			memset(&si2168_config, 0, sizeof(si2168_config));
+			si2168_config.i2c_adapter = &adapter;
+			si2168_config.fe = &port->dvb.frontend;
+			si2168_config.ts_mode = SI2168_TS_SERIAL;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+			info.addr = 0xcc >> 1;
+			info.platform_data = &si2168_config;
+			request_module(info.type);
+			client_demod = i2c_new_device(&dev->i2c_bus[2].i2c_adap, &info);
+			if (client_demod == NULL || client_demod->dev.driver == NULL) {
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_demod->dev.driver->owner)) {
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_demod = client_demod;
+
+			/* attach tuner */
+			memset(&si2157_config, 0, sizeof(si2157_config));
+			si2157_config.fe = port->dvb.frontend;
+			memset(&info, 0, sizeof(struct i2c_board_info));
+			strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+			info.addr = 0xc0 >> 1;
+			info.platform_data = &si2157_config;
+			request_module(info.type);
+			client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
+			if (client_tuner == NULL || client_tuner->dev.driver == NULL) {
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			if (!try_module_get(client_tuner->dev.driver->owner)) {
+				i2c_unregister_device(client_tuner);
+				module_put(client_demod->dev.driver->owner);
+				i2c_unregister_device(client_demod);
+				goto frontend_detach;
+			}
+			port->i2c_client_tuner = client_tuner;
+		}
+
 		break;
 	default:
 		printk(KERN_ERR "%s: The frontend isn't supported\n",
@@ -548,5 +746,9 @@ int saa7164_dvb_register(struct saa7164_port *port)
 	}
 
 	return 0;
+
+frontend_detach:
+	printk(KERN_ERR "%s() Frontend/I2C initialization failed\n", __func__);
+	return -1;
 }
 

drivers/media/pci/saa7164/saa7164.h

@@ -83,6 +83,9 @@
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_4	9
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_5	10
+#define SAA7164_BOARD_HAUPPAUGE_HVR2255proto	11
+#define SAA7164_BOARD_HAUPPAUGE_HVR2255		12
+#define SAA7164_BOARD_HAUPPAUGE_HVR2205		13
 
 #define SAA7164_MAX_UNITS		8
 #define SAA7164_TS_NUMBER_OF_LINES	312
@@ -371,6 +374,8 @@ struct saa7164_port {
 
 	/* --- DVB Transport Specific --- */
 	struct saa7164_dvb dvb;
+	struct i2c_client *i2c_client_demod;
+	struct i2c_client *i2c_client_tuner;
 
 	/* --- Encoder/V4L related attributes --- */
 	/* Encoder */