Commit 5065a706 authored by Masanari Iida's avatar Masanari Iida Committed by Jiri Kosina

treewide: Fix typo in Kconfig

Correct spelling typo in Kconfig.
Signed-off-by: default avatarMasanari Iida <standby24x7@gmail.com>
Acked-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 90e51adf
......@@ -241,7 +241,7 @@ config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, beeing the decentralized unit of a building automation
carrier board, being the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
......
......@@ -948,7 +948,7 @@ config X86_ANCIENT_MCE
depends on X86_32 && X86_MCE
---help---
Include support for machine check handling on old Pentium 5 or WinChip
systems. These typically need to be enabled explicitely on the command
systems. These typically need to be enabled explicitly on the command
line.
config X86_MCE_THRESHOLD
......
......@@ -17,7 +17,7 @@ config MISDN_DSP
This module may be used for special applications that require
cross connecting of bchannels, conferencing, dtmf decoding,
echo cancelation, tone generation, and Blowfish encryption and
echo cancellation, tone generation, and Blowfish encryption and
decryption. It may use hardware features if available.
E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
......
......@@ -204,9 +204,9 @@ config SCSI_MULTI_LUN
Some devices support more than one LUN (Logical Unit Number) in order
to allow access to several media, e.g. CD jukebox, USB card reader,
mobile phone in mass storage mode. This option forces the kernel to
probe for all LUNs by default. This setting can be overriden by
probe for all LUNs by default. This setting can be overridden by
max_luns boot/module parameter. Note that this option does not affect
devices conforming to SCSI-3 or higher as they can explicitely report
devices conforming to SCSI-3 or higher as they can explicitly report
their number of LUNs. It is safe to say Y here unless you have one of
those rare devices which reacts in an unexpected way when probed for
multiple LUNs.
......
......@@ -223,7 +223,7 @@ config XEN_ACPI_PROCESSOR
To do that the driver parses the Power Management data and uploads
said information to the Xen hypervisor. Then the Xen hypervisor can
select the proper Cx and Pxx states. It also registers itslef as the
select the proper Cx and Pxx states. It also registers itself as the
SMM so that other drivers (such as ACPI cpufreq scaling driver) will
not load.
......
......@@ -21,7 +21,7 @@ config IP_SET_MAX
You can define here default value of the maximum number
of IP sets for the kernel.
The value can be overriden by the 'max_sets' module
The value can be overridden by the 'max_sets' module
parameter of the 'ip_set' module.
config IP_SET_BITMAP_IP
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment