ARM: OMAP: USB: Add phy binding information

This is w.r.t the changes in PHY library to support adding and getting
multiple PHYs of the same type. In the new design, the
binding information between the PHY and the USB controller should be
specified in the platform specific initialization code. So it's been
done here for OMAP platforms.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/mach-omap2/board-2430sdp.c

@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -263,6 +264,7 @@ static void __init omap_2430sdp_init(void)
 	omap_hsmmc_init(mmc);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	board_smc91x_init();

arch/arm/mach-omap2/board-3430sdp.c

@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -579,6 +580,7 @@ static void __init omap_3430sdp_init(void)
 	omap_ads7846_init(1, gpio_pendown, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_smc91x_init();
 	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);

arch/arm/mach-omap2/board-4430sdp.c

@@ -28,6 +28,7 @@
 #include <linux/leds_pwm.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
@@ -696,6 +697,7 @@ static void __init omap_4430sdp_init(void)
 	omap4_sdp4430_wifi_init();
 	omap4_twl6030_hsmmc_init(mmc);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 
 	status = omap_ethernet_init();

arch/arm/mach-omap2/board-cm-t35.c

@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/tdo24m.h>
@@ -724,6 +725,7 @@ static void __init cm_t3x_common_init(void)
 	cm_t35_init_display();
 	omap_twl4030_audio_init("cm-t3x");
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	cm_t35_init_usbh();
 	cm_t35_init_camera();

arch/arm/mach-omap2/board-devkit8000.c

@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -622,6 +623,7 @@ static void __init devkit8000_init(void)
 
 	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(devkit8000_nand_partitions,

arch/arm/mach-omap2/board-igep0020.c

@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -625,6 +626,7 @@ static void __init igep_init(void)
 	omap_serial_init();
 	omap_sdrc_init(m65kxxxxam_sdrc_params,
 				  m65kxxxxam_sdrc_params);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	igep_flash_init();

arch/arm/mach-omap2/board-ldp.c

@@ -28,6 +28,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -418,6 +419,7 @@ static void __init omap_ldp_init(void)
 	omap_ads7846_init(1, 54, 310, NULL);
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
 			ZOOM_NAND_CS, 0, nand_default_timings);

arch/arm/mach-omap2/board-omap3beagle.c

@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/regulator/machine.h>
 #include <linux/i2c/twl.h>
@@ -519,6 +520,7 @@ static void __init omap3_beagle_init(void)
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3beagle_nand_partitions,

arch/arm/mach-omap2/board-omap3evm.c

@@ -41,6 +41,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mmc/host.h>
 #include <linux/export.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -734,6 +735,7 @@ static void __init omap3_evm_init(void)
 		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		usbhs_bdata.reset_gpio_port[1] = 135;
 	}
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3evm_nand_partitions,

arch/arm/mach-omap2/board-omap3logic.c

@@ -29,6 +29,7 @@
 
 #include <linux/i2c/twl.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -215,6 +216,7 @@ static void __init omap3logic_init(void)
 	board_mmc_init();
 	board_smsc911x_init();
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-omap3pandora.c

@@ -35,6 +35,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
 #include <linux/regulator/fixed.h>
+#include <linux/usb/phy.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
 #include <asm/mach-types.h>
@@ -601,6 +602,7 @@ static void __init omap3pandora_init(void)
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	gpmc_nand_init(&pandora_nand_data, NULL);
 

arch/arm/mach-omap2/board-omap3stalker.c

@@ -33,6 +33,7 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/i2c/at24.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -404,6 +405,7 @@ static void __init omap3_stalker_init(void)
 
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/spi/spi.h>
@@ -365,6 +366,7 @@ static void __init omap3_touchbook_init(void)
 
 	/* Touchscreen and accelerometer */
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	board_nand_init(omap3touchbook_nand_partitions,

arch/arm/mach-omap2/board-omap4panda.c

@@ -30,6 +30,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/ti_wilink_st.h>
 #include <linux/usb/musb.h>
+#include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
@@ -447,6 +448,7 @@ static void __init omap4_panda_init(void)
 	omap_sdrc_init(NULL, NULL);
 	omap4_twl6030_hsmmc_init(mmc);
 	omap4_ehci_init();
+	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
 	usb_musb_init(&musb_board_data);
 	omap4_panda_display_init();
 }

arch/arm/mach-omap2/board-overo.c

@@ -36,6 +36,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mmc/host.h>
+#include <linux/usb/phy.h>
 
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
@@ -499,6 +500,7 @@ static void __init overo_init(void)
 				  mt46h32m32lf6_sdrc_params);
 	board_nand_init(overo_nand_partitions,
 			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();

arch/arm/mach-omap2/board-rm680.c

@@ -18,6 +18,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
@@ -134,6 +135,7 @@ static void __init rm680_init(void)
 	sdrc_params = nokia_get_sdram_timings();
 	omap_sdrc_init(sdrc_params, sdrc_params);
 
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	rm680_peripherals_init();
 }

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -20,6 +20,7 @@
 #include <linux/wl12xx.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_data/gpio-omap.h>
+#include <linux/usb/phy.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -298,6 +299,7 @@ void __init zoom_peripherals_init(void)
 	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
+	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
 	usb_musb_init(NULL);
 	enable_board_wakeup_source();
 	omap_serial_init();