ARM: at91: pm: Use ULP0 naming instead of slow clock

Switch to use ULP0 naming instead of slow clock naming for power modes, to
be as closed as possible to datasheet. This commit does the necessary
renaming and macro addition to be as close as possible to the namings
from [1].

[1] https://lore.kernel.org/lkml/1470650705-31418-3-git-send-email-wenyou.yang@atmel.comSigned-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

arch/arm/mach-at91/pm.c

@@ -40,15 +40,15 @@ extern void at91_pinctrl_gpio_resume(void);
 #endif
 
 static const match_table_t pm_modes __initconst = {
-	{ 0, "standby" },
-	{ AT91_PM_SLOW_CLOCK, "ulp0" },
+	{ AT91_PM_STANDBY, "standby" },
+	{ AT91_PM_ULP0, "ulp0" },
 	{ AT91_PM_BACKUP, "backup" },
 	{ -1, NULL },
 };
 
 static struct at91_pm_data pm_data = {
-	.standby_mode = 0,
-	.suspend_mode = AT91_PM_SLOW_CLOCK,
+	.standby_mode = AT91_PM_STANDBY,
+	.suspend_mode = AT91_PM_ULP0,
 };
 
 #define at91_ramc_read(id, field) \
@@ -145,7 +145,7 @@ static int at91_pm_verify_clocks(void)
  */
 int at91_suspend_entering_slow_clock(void)
 {
-	return (pm_data.mode >= AT91_PM_SLOW_CLOCK);
+	return (pm_data.mode >= AT91_PM_ULP0);
 }
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
@@ -186,7 +186,7 @@ static void at91_pm_suspend(suspend_state_t state)
  * event sources; and reduces DRAM power.  But otherwise it's identical to
  * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
  *
- * AT91_PM_SLOW_CLOCK is like STANDBY plus slow clock mode, so drivers must
+ * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
  * suspend more deeply, the master clock switches to the clk32k and turns off
  * the main oscillator
  *
@@ -204,7 +204,7 @@ static int at91_pm_enter(suspend_state_t state)
 		/*
 		 * Ensure that clocks are in a valid state.
 		 */
-		if ((pm_data.mode >= AT91_PM_SLOW_CLOCK) &&
+		if (pm_data.mode >= AT91_PM_ULP0 &&
 		    !at91_pm_verify_clocks())
 			goto error;
 
@@ -546,9 +546,9 @@ static void __init at91_pm_backup_init(void)
 	pm_data.sfrbu = NULL;
 
 	if (pm_data.standby_mode == AT91_PM_BACKUP)
-		pm_data.standby_mode = AT91_PM_SLOW_CLOCK;
+		pm_data.standby_mode = AT91_PM_ULP0;
 	if (pm_data.suspend_mode == AT91_PM_BACKUP)
-		pm_data.suspend_mode = AT91_PM_SLOW_CLOCK;
+		pm_data.suspend_mode = AT91_PM_ULP0;
 }
 
 struct pmc_info {

arch/arm/mach-at91/pm.h

@@ -21,7 +21,8 @@
 #define AT91_MEMCTRL_SDRAMC	1
 #define AT91_MEMCTRL_DDRSDR	2
 
-#define	AT91_PM_SLOW_CLOCK	0x01
+#define	AT91_PM_STANDBY		0x00
+#define AT91_PM_ULP0		0x01
 #define	AT91_PM_BACKUP		0x02
 
 #ifndef __ASSEMBLY__

arch/arm/mach-at91/pm_suspend.S

@@ -112,8 +112,8 @@ ENTRY(at91_pm_suspend_in_sram)
 	bl	at91_sramc_self_refresh
 
 	ldr	r0, .pm_mode
-	cmp	r0, #AT91_PM_SLOW_CLOCK
-	beq	slow_clock
+	cmp	r0, #AT91_PM_ULP0
+	beq	ulp0_mode
 	cmp	r0, #AT91_PM_BACKUP
 	beq	backup_mode
 
@@ -122,8 +122,8 @@ ENTRY(at91_pm_suspend_in_sram)
 	at91_cpu_idle
 	b	exit_suspend
 
-slow_clock:
-	bl	at91_slowck_mode
+ulp0_mode:
+	bl	at91_ulp0_mode
 	b	exit_suspend
 backup_mode:
 	bl	at91_backup_mode
@@ -151,7 +151,7 @@ ENTRY(at91_backup_mode)
 	str	tmp1, [r0, #0]
 ENDPROC(at91_backup_mode)
 
-ENTRY(at91_slowck_mode)
+ENTRY(at91_ulp0_mode)
 	ldr	pmc, .pmc_base
 
 	/* Save Master clock setting */
@@ -212,7 +212,7 @@ ENTRY(at91_slowck_mode)
 	wait_mckrdy
 
 	mov	pc, lr
-ENDPROC(at91_slowck_mode)
+ENDPROC(at91_ulp0_mode)
 
 /*
  * void at91_sramc_self_refresh(unsigned int is_active)