x86/apic: Get rid of get_physical_broadcast()

There is no point for this function. The only case where this is used is
when there is no XAPIC available, which means the broadcast address is 0xF.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.057209154@linutronix.de

arch/x86/kernel/apic/apic.c

@@ -261,16 +261,6 @@ u64 native_apic_icr_read(void)
 	return icr1 | ((u64)icr2 << 32);
 }
 
-#ifdef CONFIG_X86_32
-/**
- * get_physical_broadcast - Get number of physical broadcast IDs
- */
-int get_physical_broadcast(void)
-{
-	return modern_apic() ? 0xff : 0xf;
-}
-#endif
-
 /**
  * lapic_get_maxlvt - get the maximum number of local vector table entries
  */

arch/x86/kernel/apic/io_apic.c

@@ -1460,12 +1460,12 @@ void restore_boot_irq_mode(void)
  */
 static void __init setup_ioapic_ids_from_mpc_nocheck(void)
 {
-	union IO_APIC_reg_00 reg_00;
 	physid_mask_t phys_id_present_map;
-	int ioapic_idx;
-	int i;
+	const u32 broadcast_id = 0xF;
+	union IO_APIC_reg_00 reg_00;
 	unsigned char old_id;
 	unsigned long flags;
+	int ioapic_idx, i;
 
 	/*
 	 * This is broken; anything with a real cpu count has to
@@ -1484,11 +1484,10 @@ static void __init setup_ioapic_ids_from_mpc_nocheck(void)
 
 		old_id = mpc_ioapic_id(ioapic_idx);
 
-		if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n",
-				ioapic_idx, mpc_ioapic_id(ioapic_idx));
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				reg_00.bits.ID);
+		if (mpc_ioapic_id(ioapic_idx) >= broadcast_id) {
+			pr_err(FW_BUG "IO-APIC#%d ID is %d in the MPC table!...\n",
+			       ioapic_idx, mpc_ioapic_id(ioapic_idx));
+			pr_err("... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID);
 			ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID;
 		}
 
@@ -1499,15 +1498,14 @@ static void __init setup_ioapic_ids_from_mpc_nocheck(void)
 		 */
 		if (apic->check_apicid_used(&phys_id_present_map,
 					    mpc_ioapic_id(ioapic_idx))) {
-			printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n",
-				ioapic_idx, mpc_ioapic_id(ioapic_idx));
-			for (i = 0; i < get_physical_broadcast(); i++)
+			pr_err(FW_BUG "IO-APIC#%d ID %d is already used!...\n",
+			       ioapic_idx, mpc_ioapic_id(ioapic_idx));
+			for (i = 0; i < broadcast_id; i++)
 				if (!physid_isset(i, phys_id_present_map))
 					break;
-			if (i >= get_physical_broadcast())
+			if (i >= broadcast_id)
 				panic("Max APIC ID exceeded!\n");
-			printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n",
-				i);
+			pr_err("... fixing up to %d. (tell your hw vendor)\n", i);
 			physid_set(i, phys_id_present_map);
 			ioapics[ioapic_idx].mp_config.apicid = i;
 		} else {
@@ -2209,7 +2207,7 @@ static inline void __init check_timer(void)
 	 * 8259A.
 	 */
 	if (pin1 == -1) {
-		panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC");
+		panic_if_irq_remap(FW_BUG "Timer not connected to IO-APIC");
 		pin1 = pin2;
 		apic1 = apic2;
 		no_pin1 = 1;
@@ -2495,6 +2493,7 @@ unsigned int arch_dynirq_lower_bound(unsigned int from)
 static int io_apic_get_unique_id(int ioapic, int apic_id)
 {
 	static physid_mask_t apic_id_map = PHYSID_MASK_NONE;
+	const u32 broadcast_id = 0xF;
 	union IO_APIC_reg_00 reg_00;
 	unsigned long flags;
 	int i = 0;
@@ -2515,9 +2514,9 @@ static int io_apic_get_unique_id(int ioapic, int apic_id)
 	reg_00.raw = io_apic_read(ioapic, 0);
 	raw_spin_unlock_irqrestore(&ioapic_lock, flags);
 
-	if (apic_id >= get_physical_broadcast()) {
-		printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying "
-			"%d\n", ioapic, apic_id, reg_00.bits.ID);
+	if (apic_id >= broadcast_id) {
+		pr_warn("IOAPIC[%d]: Invalid apic_id %d, trying %d\n",
+			ioapic, apic_id, reg_00.bits.ID);
 		apic_id = reg_00.bits.ID;
 	}
 
@@ -2527,17 +2526,15 @@ static int io_apic_get_unique_id(int ioapic, int apic_id)
 	 */
 	if (apic->check_apicid_used(&apic_id_map, apic_id)) {
 
-		for (i = 0; i < get_physical_broadcast(); i++) {
+		for (i = 0; i < broadcast_id; i++) {
 			if (!apic->check_apicid_used(&apic_id_map, i))
 				break;
 		}
 
-		if (i == get_physical_broadcast())
+		if (i == broadcast_id)
 			panic("Max apic_id exceeded!\n");
 
-		printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, "
-			"trying %d\n", ioapic, apic_id, i);
-
+		pr_warn("IOAPIC[%d]: apic_id %d already used, trying %d\n", ioapic, apic_id, i);
 		apic_id = i;
 	}
 
@@ -2567,11 +2564,9 @@ static int io_apic_get_unique_id(int ioapic, int apic_id)
 
 static u8 io_apic_unique_id(int idx, u8 id)
 {
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(boot_cpu_apic_version))
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && !APIC_XAPIC(boot_cpu_apic_version))
 		return io_apic_get_unique_id(idx, id);
-	else
-		return id;
+	return id;
 }
 #else
 static u8 io_apic_unique_id(int idx, u8 id)