Commit 51d35631 authored by Douglas Anderson's avatar Douglas Anderson Committed by Linus Walleij

drm/panel-simple: Add N116BCA-EA1

This panel is quite similar to the similarly named N116BGE panel (the
nominal timings are, in fact identical).  However, let's add a new
entry because the full range of clocks listed for N116BGE aren't
supported for N116BCA-EA1, at least according to the datasheet.
Signed-off-by: default avatarDouglas Anderson <dianders@chromium.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115144345.v2.5.I3c01f3aab8335cb509da7009d8938c1a27a266dc@changeid
parent 339c3e80
......@@ -2407,6 +2407,36 @@ static const struct panel_desc innolux_g121x1_l03 = {
},
};
static const struct drm_display_mode innolux_n116bca_ea1_mode = {
.clock = 76420,
.hdisplay = 1366,
.hsync_start = 1366 + 136,
.hsync_end = 1366 + 136 + 30,
.htotal = 1366 + 136 + 30 + 60,
.vdisplay = 768,
.vsync_start = 768 + 8,
.vsync_end = 768 + 8 + 12,
.vtotal = 768 + 8 + 12 + 12,
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
};
static const struct panel_desc innolux_n116bca_ea1 = {
.modes = &innolux_n116bca_ea1_mode,
.num_modes = 1,
.bpc = 6,
.size = {
.width = 256,
.height = 144,
},
.delay = {
.hpd_absent_delay = 200,
.prepare_to_enable = 80,
.unprepare = 500,
},
.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
.connector_type = DRM_MODE_CONNECTOR_eDP,
};
/*
* Datasheet specifies that at 60 Hz refresh rate:
* - total horizontal time: { 1506, 1592, 1716 }
......@@ -4322,6 +4352,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "innolux,g121x1-l03",
.data = &innolux_g121x1_l03,
}, {
.compatible = "innolux,n116bca-ea1",
.data = &innolux_n116bca_ea1,
}, {
.compatible = "innolux,n116bge",
.data = &innolux_n116bge,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment