Commit 51f1ffc0 authored by Bharat Kumar Gogada's avatar Bharat Kumar Gogada Committed by Bjorn Helgaas

PCI: xilinx-cpm: Add support for Versal CPM5 Root Port

The Xilinx Versal Premium series has CPM5 block which supports Root Port
functioning at Gen5 speed.

Xilinx Versal CPM5 has a few changes from the existing CPM block:

  - CPM5 has dedicated register space for control and status registers.

  - CPM5 legacy interrupt handling needs additional register bit to enable
    and handle legacy interrupts.

Add support for the new CPM5 features.

[bhelgaas: compare variant->version with CPM5 explicitly]
Link: https://lore.kernel.org/r/20220705105646.16980-3-bharat.kumar.gogada@xilinx.comSigned-off-by: default avatarBharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
parent 49f40703
......@@ -35,6 +35,10 @@
#define XILINX_CPM_PCIE_MISC_IR_ENABLE 0x00000348
#define XILINX_CPM_PCIE_MISC_IR_LOCAL BIT(1)
#define XILINX_CPM_PCIE_IR_STATUS 0x000002A0
#define XILINX_CPM_PCIE_IR_ENABLE 0x000002A8
#define XILINX_CPM_PCIE_IR_LOCAL BIT(0)
/* Interrupt registers definitions */
#define XILINX_CPM_PCIE_INTR_LINK_DOWN 0
#define XILINX_CPM_PCIE_INTR_HOT_RESET 3
......@@ -98,6 +102,19 @@
/* Phy Status/Control Register definitions */
#define XILINX_CPM_PCIE_REG_PSCR_LNKUP BIT(11)
enum xilinx_cpm_version {
CPM,
CPM5,
};
/**
* struct xilinx_cpm_variant - CPM variant information
* @version: CPM version
*/
struct xilinx_cpm_variant {
enum xilinx_cpm_version version;
};
/**
* struct xilinx_cpm_pcie - PCIe port information
* @dev: Device pointer
......@@ -109,6 +126,7 @@
* @intx_irq: legacy interrupt number
* @irq: Error interrupt number
* @lock: lock protecting shared register access
* @variant: CPM version check pointer
*/
struct xilinx_cpm_pcie {
struct device *dev;
......@@ -120,6 +138,7 @@ struct xilinx_cpm_pcie {
int intx_irq;
int irq;
raw_spinlock_t lock;
const struct xilinx_cpm_variant *variant;
};
static u32 pcie_read(struct xilinx_cpm_pcie *port, u32 reg)
......@@ -285,6 +304,13 @@ static void xilinx_cpm_pcie_event_flow(struct irq_desc *desc)
generic_handle_domain_irq(port->cpm_domain, i);
pcie_write(port, val, XILINX_CPM_PCIE_REG_IDR);
if (port->variant->version == CPM5) {
val = readl_relaxed(port->cpm_base + XILINX_CPM_PCIE_IR_STATUS);
if (val)
writel_relaxed(val, port->cpm_base +
XILINX_CPM_PCIE_IR_STATUS);
}
/*
* XILINX_CPM_PCIE_MISC_IR_STATUS register is mapped to
* CPM SLCR block.
......@@ -484,6 +510,12 @@ static void xilinx_cpm_pcie_init_port(struct xilinx_cpm_pcie *port)
*/
writel(XILINX_CPM_PCIE_MISC_IR_LOCAL,
port->cpm_base + XILINX_CPM_PCIE_MISC_IR_ENABLE);
if (port->variant->version == CPM5) {
writel(XILINX_CPM_PCIE_IR_LOCAL,
port->cpm_base + XILINX_CPM_PCIE_IR_ENABLE);
}
/* Enable the Bridge enable bit */
pcie_write(port, pcie_read(port, XILINX_CPM_PCIE_REG_RPSC) |
XILINX_CPM_PCIE_REG_RPSC_BEN,
......@@ -518,7 +550,14 @@ static int xilinx_cpm_pcie_parse_dt(struct xilinx_cpm_pcie *port,
if (IS_ERR(port->cfg))
return PTR_ERR(port->cfg);
port->reg_base = port->cfg->win;
if (port->variant->version == CPM5) {
port->reg_base = devm_platform_ioremap_resource_byname(pdev,
"cpm_csr");
if (IS_ERR(port->reg_base))
return PTR_ERR(port->reg_base);
} else {
port->reg_base = port->cfg->win;
}
return 0;
}
......@@ -559,6 +598,8 @@ static int xilinx_cpm_pcie_probe(struct platform_device *pdev)
if (!bus)
return -ENODEV;
port->variant = of_device_get_match_data(dev);
err = xilinx_cpm_pcie_parse_dt(port, bus->res);
if (err) {
dev_err(dev, "Parsing DT failed\n");
......@@ -591,8 +632,23 @@ static int xilinx_cpm_pcie_probe(struct platform_device *pdev)
return err;
}
static const struct xilinx_cpm_variant cpm_host = {
.version = CPM,
};
static const struct xilinx_cpm_variant cpm5_host = {
.version = CPM5,
};
static const struct of_device_id xilinx_cpm_pcie_of_match[] = {
{ .compatible = "xlnx,versal-cpm-host-1.00", },
{
.compatible = "xlnx,versal-cpm-host-1.00",
.data = &cpm_host,
},
{
.compatible = "xlnx,versal-cpm5-host",
.data = &cpm5_host,
},
{}
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment