Commit 51ffd971 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Ben Dooks

ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100

Move i2c helpers from plat-s5pc1xx to mach-s5pc100.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent b884c0e0
......@@ -23,6 +23,11 @@ config S5PC100_SETUP_SDHCI
help
Internal helper functions for S5PC100 based SDHCI systems
config S5PC100_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
......@@ -31,9 +36,8 @@ config MACH_SMDKC100
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S5PC1XX_SETUP_I2C0
select S5PC1XX_SETUP_I2C1
select S5PC100_SETUP_FB_24BPP
select S5PC100_SETUP_I2C1
select S5PC100_SETUP_SDHCI
help
Machine support for the Samsung SMDKC100
......@@ -12,10 +12,12 @@ obj- :=
# Core support for S5PC100 system
obj-$(CONFIG_CPU_S5PC100) += cpu.o gpiolib.o
obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o
# Helper and device support
obj-$(CONFIG_S5PC100_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
# machine support
......
/* linux/arch/arm/plat-s5pc1xx/setup-i2c0.c
/* linux/arch/arm/mach-s5pc100/setup-i2c0.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Base S5PC1XX I2C bus 0 gpio configuration
* Base S5PC100 I2C bus 0 gpio configuration
*
* Based on plat-s3c64xx/setup-i2c0.c
*
......
/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c
/* linux/arch/arm/mach-s5pc100/setup-i2c1.c
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* Base S5PC1XX I2C bus 1 gpio configuration
* Base S5PC100 I2C bus 1 gpio configuration
*
* Based on plat-s3c64xx/setup-i2c1.c
*
......
......@@ -39,20 +39,6 @@ config CPU_S5PC100_CLOCK
# platform specific device setup
config S5PC1XX_SETUP_I2C0
bool
default y
help
Common setup code for i2c bus 0.
Note, currently since i2c0 is always compiled, this setup helper
is always compiled with it.
config S5PC1XX_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S5PC1XX_SETUP_SDHCI_GPIO
bool
help
......
......@@ -23,6 +23,4 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK) += s5pc100-clock.o
# Device setup
obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment