pinctrl: sx150x: Register pinctrl before adding the gpiochip

commit 1a1d39e1 upstream.

Various gpiolib activity depend on the pinctrl to be up and kicking.
Therefore, register the pinctrl before adding a gpiochip.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/pinctrl/pinctrl-sx150x.c

@@ -1144,6 +1144,27 @@ static int sx150x_probe(struct i2c_client *client,
 	if (ret)
 		return ret;
 
+	/* Pinctrl_desc */
+	pctl->pinctrl_desc.name = "sx150x-pinctrl";
+	pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops;
+	pctl->pinctrl_desc.confops = &sx150x_pinconf_ops;
+	pctl->pinctrl_desc.pins = pctl->data->pins;
+	pctl->pinctrl_desc.npins = pctl->data->npins;
+	pctl->pinctrl_desc.owner = THIS_MODULE;
+
+	ret = devm_pinctrl_register_and_init(dev, &pctl->pinctrl_desc,
+					     pctl, &pctl->pctldev);
+	if (ret) {
+		dev_err(dev, "Failed to register pinctrl device\n");
+		return ret;
+	}
+
+	ret = pinctrl_enable(pctl->pctldev);
+	if (ret) {
+		dev_err(dev, "Failed to enable pinctrl device\n");
+		return ret;
+	}
+
 	/* Register GPIO controller */
 	pctl->gpio.label = devm_kstrdup(dev, client->name, GFP_KERNEL);
 	pctl->gpio.base = -1;
@@ -1217,20 +1238,6 @@ static int sx150x_probe(struct i2c_client *client,
 					    client->irq);
 	}
 
-	/* Pinctrl_desc */
-	pctl->pinctrl_desc.name = "sx150x-pinctrl";
-	pctl->pinctrl_desc.pctlops = &sx150x_pinctrl_ops;
-	pctl->pinctrl_desc.confops = &sx150x_pinconf_ops;
-	pctl->pinctrl_desc.pins = pctl->data->pins;
-	pctl->pinctrl_desc.npins = pctl->data->npins;
-	pctl->pinctrl_desc.owner = THIS_MODULE;
-
-	pctl->pctldev = devm_pinctrl_register(dev, &pctl->pinctrl_desc, pctl);
-	if (IS_ERR(pctl->pctldev)) {
-		dev_err(dev, "Failed to register pinctrl device\n");
-		return PTR_ERR(pctl->pctldev);
-	}
-
 	return 0;
 }