Merge branch 'linus_origin' into hotfixes

Documentation/00-INDEX

@@ -109,6 +109,8 @@ cpu-hotplug.txt
 	- document describing CPU hotplug support in the Linux kernel.
 cpu-load.txt
 	- document describing how CPU load statistics are collected.
+cpuidle/
+	- info on CPU_IDLE, CPU idle state management subsystem.
 cpusets.txt
 	- documents the cpusets feature; assign CPUs and Mem to a set of tasks.
 cputopology.txt

Documentation/cpuidle/core.txt

+
+		Supporting multiple CPU idle levels in kernel
+
+				cpuidle
+
+General Information:
+
+Various CPUs today support multiple idle levels that are differentiated
+by varying exit latencies and power consumption during idle.
+cpuidle is a generic in-kernel infrastructure that separates
+idle policy (governor) from idle mechanism (driver) and provides a
+standardized infrastructure to support independent development of
+governors and drivers.
+
+cpuidle resides under drivers/cpuidle.
+
+Boot options:
+"cpuidle_sysfs_switch"
+enables current_governor interface in /sys/devices/system/cpu/cpuidle/,
+which can be used to switch governors at run time. This boot option
+is meant for developer testing only. In normal usage, kernel picks the
+best governor based on governor ratings.
+SEE ALSO: sysfs.txt in this directory.

Documentation/cpuidle/driver.txt

+
+
+		Supporting multiple CPU idle levels in kernel
+
+				cpuidle drivers
+
+
+
+
+cpuidle driver hooks into the cpuidle infrastructure and handles the
+architecture/platform dependent part of CPU idle states. Driver
+provides the platform idle state detection capability and also
+has mechanisms in place to support actual entry-exit into CPU idle states.
+
+cpuidle driver initializes the cpuidle_device structure for each CPU device
+and registers with cpuidle using cpuidle_register_device.
+
+It can also support the dynamic changes (like battery <-> AC), by using
+cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device,
+cpuidle_resume_and_unlock.
+
+Interfaces:
+extern int cpuidle_register_driver(struct cpuidle_driver *drv);
+extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
+extern int cpuidle_register_device(struct cpuidle_device *dev);
+extern void cpuidle_unregister_device(struct cpuidle_device *dev);
+
+extern void cpuidle_pause_and_lock(void);
+extern void cpuidle_resume_and_unlock(void);
+extern int cpuidle_enable_device(struct cpuidle_device *dev);
+extern void cpuidle_disable_device(struct cpuidle_device *dev);

Documentation/cpuidle/governor.txt

+
+
+
+		Supporting multiple CPU idle levels in kernel
+
+				cpuidle governors
+
+
+
+
+cpuidle governor is policy routine that decides what idle state to enter at
+any given time. cpuidle core uses different callbacks to the governor.
+
+* enable() to enable governor for a particular device
+* disable() to disable governor for a particular device
+* select() to select an idle state to enter
+* reflect() called after returning from the idle state, which can be used
+  by the governor for some record keeping.
+
+More than one governor can be registered at the same time and
+users can switch between drivers using /sysfs interface (when enabled).
+More than one governor part is supported for developers to easily experiment
+with different governors. By default, most optimal governor based on your
+kernel configuration and platform will be selected by cpuidle.
+
+Interfaces:
+extern int cpuidle_register_governor(struct cpuidle_governor *gov);
+extern void cpuidle_unregister_governor(struct cpuidle_governor *gov);
+struct cpuidle_governor

Documentation/cpuidle/sysfs.txt

+
+
+		Supporting multiple CPU idle levels in kernel
+
+				cpuidle sysfs
+
+System global cpuidle related information and tunables are under
+/sys/devices/system/cpu/cpuidle
+
+The current interfaces in this directory has self-explanatory names:
+* current_driver
+* current_governor_ro
+
+With cpuidle_sysfs_switch boot option (meant for developer testing)
+following objects are visible instead.
+* current_driver
+* available_governors
+* current_governor
+In this case users can switch the governor at run time by writing
+to current_governor.
+
+
+Per logical CPU specific cpuidle information are under
+/sys/devices/system/cpu/cpuX/cpuidle
+for each online cpu X
+
+--------------------------------------------------------------------------------
+# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/
+/sys/devices/system/cpu/cpu0/cpuidle/:
+total 0
+drwxr-xr-x 2 root root 0 Feb  8 10:42 state0
+drwxr-xr-x 2 root root 0 Feb  8 10:42 state1
+drwxr-xr-x 2 root root 0 Feb  8 10:42 state2
+drwxr-xr-x 2 root root 0 Feb  8 10:42 state3
+
+/sys/devices/system/cpu/cpu0/cpuidle/state0:
+total 0
+-r--r--r-- 1 root root 4096 Feb  8 10:42 desc
+-r--r--r-- 1 root root 4096 Feb  8 10:42 latency
+-r--r--r-- 1 root root 4096 Feb  8 10:42 name
+-r--r--r-- 1 root root 4096 Feb  8 10:42 power
+-r--r--r-- 1 root root 4096 Feb  8 10:42 time
+-r--r--r-- 1 root root 4096 Feb  8 10:42 usage
+
+/sys/devices/system/cpu/cpu0/cpuidle/state1:
+total 0
+-r--r--r-- 1 root root 4096 Feb  8 10:42 desc
+-r--r--r-- 1 root root 4096 Feb  8 10:42 latency
+-r--r--r-- 1 root root 4096 Feb  8 10:42 name
+-r--r--r-- 1 root root 4096 Feb  8 10:42 power
+-r--r--r-- 1 root root 4096 Feb  8 10:42 time
+-r--r--r-- 1 root root 4096 Feb  8 10:42 usage
+
+/sys/devices/system/cpu/cpu0/cpuidle/state2:
+total 0
+-r--r--r-- 1 root root 4096 Feb  8 10:42 desc
+-r--r--r-- 1 root root 4096 Feb  8 10:42 latency
+-r--r--r-- 1 root root 4096 Feb  8 10:42 name
+-r--r--r-- 1 root root 4096 Feb  8 10:42 power
+-r--r--r-- 1 root root 4096 Feb  8 10:42 time
+-r--r--r-- 1 root root 4096 Feb  8 10:42 usage
+
+/sys/devices/system/cpu/cpu0/cpuidle/state3:
+total 0
+-r--r--r-- 1 root root 4096 Feb  8 10:42 desc
+-r--r--r-- 1 root root 4096 Feb  8 10:42 latency
+-r--r--r-- 1 root root 4096 Feb  8 10:42 name
+-r--r--r-- 1 root root 4096 Feb  8 10:42 power
+-r--r--r-- 1 root root 4096 Feb  8 10:42 time
+-r--r--r-- 1 root root 4096 Feb  8 10:42 usage
+--------------------------------------------------------------------------------
+
+
+* desc : Small description about the idle state (string)
+* latency : Latency to exit out of this idle state (in microseconds)
+* name : Name of the idle state (string)
+* power : Power consumed while in this idle state (in milliwatts)
+* time : Total time spent in this idle state (in microseconds)
+* usage : Number of times this state was entered (count)

MAINTAINERS

@@ -1255,8 +1255,8 @@ W:	http://linux-net.osdl.org/index.php/DCCP
 S:	Maintained
 
 DECnet NETWORK LAYER
-P:	Patrick Caulfield
-M:	patrick@tykepenguin.com
+P:	Christine Caulfield
+M:	christine.caulfield@googlemail.com
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Maintained
@@ -1318,8 +1318,8 @@ L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 DISTRIBUTED LOCK MANAGER
-P:	Patrick Caulfield
-M:	pcaulfie@redhat.com
+P:	Christine Caulfield
+M:	ccaulfie@redhat.com
 P:	David Teigland
 M:	teigland@redhat.com
 L:	cluster-devel@redhat.com
@@ -1616,6 +1616,7 @@ S:	Maintained
 FILESYSTEMS (VFS and infrastructure)
 P:	Alexander Viro
 M:	viro@zeniv.linux.org.uk
+L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 
 FIREWIRE SUBSYSTEM (drivers/firewire, <linux/firewire*.h>)

arch/alpha/kernel/osf_sys.c

@@ -259,8 +259,8 @@ osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bu
 
 	retval = user_path_walk(path, &nd);
 	if (!retval) {
-		retval = do_osf_statfs(nd.dentry, buffer, bufsiz);
-		path_release(&nd);
+		retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
+		path_put(&nd.path);
 	}
 	return retval;
 }

arch/blackfin/kernel/traps.c

@@ -126,15 +126,13 @@ static void decode_address(char *buf, unsigned long address)
 			struct vm_area_struct *vma = vml->vma;
 
 			if (address >= vma->vm_start && address < vma->vm_end) {
+				char _tmpbuf[256];
 				char *name = p->comm;
 				struct file *file = vma->vm_file;
-				if (file) {
-					char _tmpbuf[256];
-					name = d_path(file->f_dentry,
-					              file->f_vfsmnt,
-					              _tmpbuf,
-					              sizeof(_tmpbuf));
-				}
+
+				if (file)
+					name = d_path(&file->f_path, _tmpbuf,
+						      sizeof(_tmpbuf));
 
 				/* FLAT does not have its text aligned to the start of
 				 * the map while FDPIC ELF does ...

arch/m68knommu/platform/5206/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/5206e/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/520x/Makefile

@@ -12,8 +12,6 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o

arch/m68knommu/platform/523x/Makefile

@@ -12,8 +12,6 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o

arch/m68knommu/platform/5249/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/5272/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/527x/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/528x/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/5307/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y	+= config.o
 

arch/m68knommu/platform/532x/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 #obj-y := config.o usb-mcf532x.o spi-mcf532x.o
 obj-y := config.o

arch/m68knommu/platform/5407/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-EXTRA_AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-y := config.o
 

arch/m68knommu/platform/coldfire/Makefile

@@ -12,9 +12,7 @@
 # EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT
 #
 
-ifdef CONFIG_FULLDEBUG
-AFLAGS += -DDEBUGGER_COMPATIBLE_CACHE=1
-endif
+asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 
 obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o

arch/m68knommu/platform/coldfire/entry.S

@@ -197,14 +197,13 @@ ENTRY(fasthandler)
 	RESTORE_LOCAL
 
 ENTRY(ret_from_interrupt)
-	jeq	2f
-1:
-	RESTORE_ALL
-2:
 	moveb	%sp@(PT_SR),%d0
 	andl	#0x7,%d0
-	jhi	1b
+	jeq	1f
 
+	RESTORE_ALL
+
+1:
 	/* check if we need to do software interrupts */
 	movel	irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0
 	jeq	ret_from_exception

arch/m68knommu/platform/coldfire/timers.c

@@ -148,25 +148,32 @@ irqreturn_t coldfire_profile_tick(int irq, void *dummy)
 	/* Reset ColdFire timer2 */
 	__raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
 	if (current->pid)
-		profile_tick(CPU_PROFILING, regs);
+		profile_tick(CPU_PROFILING);
 	return IRQ_HANDLED;
 }
 
 /***************************************************************************/
 
+static struct irqaction coldfire_profile_irq = {
+	.name	 = "profile timer",
+	.flags	 = IRQF_DISABLED | IRQF_TIMER,
+	.handler = coldfire_profile_tick,
+};
+
 void coldfire_profile_init(void)
 {
-	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n", PROFILEHZ);
+	printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
+	       PROFILEHZ);
+
+	setup_irq(mcf_profilevector, &coldfire_profile_irq);
 
 	/* Set up TIMER 2 as high speed profile clock */
 	__raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 
-	__raw_writetrr(((MCF_CLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
+	__raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
 	__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 		MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 
-	request_irq(mcf_profilevector, coldfire_profile_tick,
-		(IRQF_DISABLED | IRQ_FLG_FAST), "profile timer", NULL);
 	mcf_settimericr(2, 7);
 }
 

arch/mips/kernel/sysirix.c

@@ -694,7 +694,7 @@ asmlinkage int irix_statfs(const char __user *path,
 	if (error)
 		goto out;
 
-	error = vfs_statfs(nd.dentry, &kbuf);
+	error = vfs_statfs(nd.path.dentry, &kbuf);
 	if (error)
 		goto dput_and_out;
 
@@ -711,7 +711,7 @@ asmlinkage int irix_statfs(const char __user *path,
 	}
 
 dput_and_out:
-	path_release(&nd);
+	path_put(&nd.path);
 out:
 	return error;
 }
@@ -1360,7 +1360,7 @@ asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
-	error = vfs_statfs(nd.dentry, &kbuf);
+	error = vfs_statfs(nd.path.dentry, &kbuf);
 	if (error)
 		goto dput_and_out;
 
@@ -1385,7 +1385,7 @@ asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
 		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
-	path_release(&nd);
+	path_put(&nd.path);
 out:
 	return error;
 }
@@ -1611,7 +1611,7 @@ asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *
 	error = user_path_walk(fname, &nd);
 	if (error)
 		goto out;
-	error = vfs_statfs(nd.dentry, &kbuf);
+	error = vfs_statfs(nd.path.dentry, &kbuf);
 	if (error)
 		goto dput_and_out;
 
@@ -1636,7 +1636,7 @@ asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *
 		error |= __put_user(0, &buf->f_fstr[i]);
 
 dput_and_out:
-	path_release(&nd);
+	path_put(&nd.path);
 out:
 	return error;
 }

arch/parisc/hpux/sys_hpux.c

@@ -219,10 +219,10 @@ asmlinkage long hpux_statfs(const char __user *path,
 	error = user_path_walk(path, &nd);
 	if (!error) {
 		struct hpux_statfs tmp;
-		error = vfs_statfs_hpux(nd.dentry, &tmp);
+		error = vfs_statfs_hpux(nd.path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_release(&nd);
+		path_put(&nd.path);
 	}
 	return error;
 }

arch/powerpc/Kconfig

@@ -442,10 +442,6 @@ config SECCOMP
 
 	  If unsure, say Y. Only embedded should say N here.
 
-config WANT_DEVICE_TREE
-	bool
-	default n
-
 endmenu
 
 config ISA_DMA_API

arch/powerpc/boot/Makefile

@@ -147,6 +147,8 @@ HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
 targets += dtc-src/dtc-parser.tab.c
 targets += dtc-src/dtc-lexer.lex.c
 
+clean-files += dtc-src/dtc-parser.tab.h
+
 ifdef DTC_GENPARSER
 BISON = bison
 FLEX = flex

arch/powerpc/boot/ps3-hvcall.S

@@ -145,7 +145,7 @@
 .macro STORE_REGS_5_2
 	lwz r11, 16(r1)
 	std r4, 0(r11)
-	lwz r11, 24(r1)
+	lwz r11, 20(r1)
 	std r5, 0(r11)
 .endm
 

arch/powerpc/kernel/Makefile

@@ -104,3 +104,5 @@ quiet_cmd_systbl_chk = CALL    $<
 PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
+
+clean-files := vmlinux.lds

arch/powerpc/kernel/process.c

@@ -462,7 +462,7 @@ void show_regs(struct pt_regs * regs)
 	       current, task_pid_nr(current), current->comm, task_thread_info(current));
 
 #ifdef CONFIG_SMP
-	printk(" CPU: %d", smp_processor_id());
+	printk(" CPU: %d", raw_smp_processor_id());
 #endif /* CONFIG_SMP */
 
 	for (i = 0;  i < 32;  i++) {

arch/powerpc/kernel/vdso.c

@@ -336,9 +336,9 @@ static unsigned long __init find_function32(struct lib32_elfinfo *lib,
 	return sym->st_value - VDSO32_LBASE;
 }
 
-static int vdso_do_func_patch32(struct lib32_elfinfo *v32,
-				struct lib64_elfinfo *v64,
-				const char *orig, const char *fix)
+static int __init vdso_do_func_patch32(struct lib32_elfinfo *v32,
+				       struct lib64_elfinfo *v64,
+				       const char *orig, const char *fix)
 {
 	Elf32_Sym *sym32_gen, *sym32_fix;
 
@@ -433,9 +433,9 @@ static unsigned long __init find_function64(struct lib64_elfinfo *lib,
 #endif
 }
 
-static int vdso_do_func_patch64(struct lib32_elfinfo *v32,
-				struct lib64_elfinfo *v64,
-				const char *orig, const char *fix)
+static int __init vdso_do_func_patch64(struct lib32_elfinfo *v32,
+				       struct lib64_elfinfo *v64,
+				       const char *orig, const char *fix)
 {
 	Elf64_Sym *sym64_gen, *sym64_fix;
 

arch/powerpc/oprofile/cell/spu_task_sync.c

@@ -198,14 +198,13 @@ static int release_cached_info(int spu_index)
  * dcookie user still being registered (namely, the reader
  * of the event buffer).
  */
-static inline unsigned long fast_get_dcookie(struct dentry *dentry,
-					     struct vfsmount *vfsmnt)
+static inline unsigned long fast_get_dcookie(struct path *path)
 {
 	unsigned long cookie;
 
-	if (dentry->d_cookie)
-		return (unsigned long)dentry;
-	get_dcookie(dentry, vfsmnt, &cookie);
+	if (path->dentry->d_cookie)
+		return (unsigned long)path->dentry;
+	get_dcookie(path, &cookie);
 	return cookie;
 }
 
@@ -240,8 +239,7 @@ get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
 			continue;
 		if (!(vma->vm_flags & VM_EXECUTABLE))
 			continue;
-		app_cookie = fast_get_dcookie(vma->vm_file->f_dentry,
-					  vma->vm_file->f_vfsmnt);
+		app_cookie = fast_get_dcookie(&vma->vm_file->f_path);
 		pr_debug("got dcookie for %s\n",
 			 vma->vm_file->f_dentry->d_name.name);
 		app = vma->vm_file;
@@ -262,8 +260,7 @@ get_exec_dcookie_and_offset(struct spu *spu, unsigned int *offsetp,
 		break;
 	}
 
-	*spu_bin_dcookie = fast_get_dcookie(vma->vm_file->f_dentry,
-						 vma->vm_file->f_vfsmnt);
+	*spu_bin_dcookie = fast_get_dcookie(&vma->vm_file->f_path);
 	pr_debug("got dcookie for %s\n", vma->vm_file->f_dentry->d_name.name);
 
 	up_read(&mm->mmap_sem);

arch/powerpc/platforms/512x/Kconfig

@@ -13,7 +13,6 @@ config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MULTIPLATFORM && PPC32
 	select DEFAULT_UIMAGE
-	select WANT_DEVICE_TREE
 	select PPC_MPC5121
 	help
 	  This option enables support for the MPC5121E ADS board.

arch/powerpc/platforms/52xx/Kconfig

@@ -8,7 +8,6 @@ config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
 	depends on PPC_MPC52xx
 	select DEFAULT_UIMAGE
-	select WANT_DEVICE_TREE
 	help
 	  This option enables support for a simple MPC52xx based boards which
 	  do not need a custom platform specific setup. Such boards are
@@ -35,7 +34,6 @@ config PPC_LITE5200
 	bool "Freescale Lite5200 Eval Board"
 	depends on PPC_MPC52xx
 	select DEFAULT_UIMAGE
-	select WANT_DEVICE_TREE
 
 config PPC_MPC5200_BUGFIX
 	bool "MPC5200 (L25R) bugfix support"

arch/powerpc/platforms/Kconfig

@@ -15,7 +15,6 @@ config PPC_MULTIPLATFORM
 config PPC_82xx
 	bool "Freescale 82xx"
 	depends on 6xx
-	select WANT_DEVICE_TREE
 
 config PPC_83xx
 	bool "Freescale 83xx"
@@ -23,7 +22,6 @@ config PPC_83xx
 	select FSL_SOC
 	select MPC83xx
 	select IPIC
-	select WANT_DEVICE_TREE
 	select FSL_EMB_PERFMON
 
 config PPC_86xx

arch/powerpc/platforms/Kconfig.cputype

@@ -29,26 +29,22 @@ config PPC_85xx
 	bool "Freescale 85xx"
 	select E500
 	select FSL_SOC
-	select WANT_DEVICE_TREE
 	select MPC85xx
 
 config PPC_8xx
 	bool "Freescale 8xx"
 	select FSL_SOC
 	select 8xx
-	select WANT_DEVICE_TREE
 	select PPC_LIB_RHEAP
 
 config 40x
 	bool "AMCC 40x"
 	select PPC_DCR_NATIVE
-	select WANT_DEVICE_TREE
 	select PPC_UDBG_16550
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
-	select WANT_DEVICE_TREE
 	select PPC_UDBG_16550
 
 config E200

arch/powerpc/platforms/cell/ras.c

-#define DEBUG
+/*
+ * Copyright 2006-2008, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
 
 #include <linux/types.h>
 #include <linux/kernel.h>

arch/powerpc/platforms/cell/spufs/inode.c

+
 /*
  * SPU file system
  *
@@ -592,7 +593,7 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 
 	ret = -EINVAL;
 	/* check if we are on spufs */
-	if (nd->dentry->d_sb->s_type != &spufs_type)
+	if (nd->path.dentry->d_sb->s_type != &spufs_type)
 		goto out;
 
 	/* don't accept undefined flags */
@@ -600,9 +601,9 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 		goto out;
 
 	/* only threads can be underneath a gang */
-	if (nd->dentry != nd->dentry->d_sb->s_root) {
+	if (nd->path.dentry != nd->path.dentry->d_sb->s_root) {
 		if ((flags & SPU_CREATE_GANG) ||
-		    !SPUFS_I(nd->dentry->d_inode)->i_gang)
+		    !SPUFS_I(nd->path.dentry->d_inode)->i_gang)
 			goto out;
 	}
 
@@ -618,16 +619,17 @@ long spufs_create(struct nameidata *nd, unsigned int flags, mode_t mode,
 	mode &= ~current->fs->umask;
 
 	if (flags & SPU_CREATE_GANG)
-		return spufs_create_gang(nd->dentry->d_inode,
-					dentry, nd->mnt, mode);
+		return spufs_create_gang(nd->path.dentry->d_inode,
+					 dentry, nd->path.mnt, mode);
 	else
-		return spufs_create_context(nd->dentry->d_inode,
-					dentry, nd->mnt, flags, mode, filp);
+		return spufs_create_context(nd->path.dentry->d_inode,
+					    dentry, nd->path.mnt, flags, mode,
+					    filp);
 
 out_dput:
 	dput(dentry);
 out_dir:
-	mutex_unlock(&nd->dentry->d_inode->i_mutex);
+	mutex_unlock(&nd->path.dentry->d_inode->i_mutex);
 out:
 	return ret;
 }

arch/powerpc/platforms/cell/spufs/syscalls.c

@@ -73,7 +73,7 @@ static long do_spu_create(const char __user *pathname, unsigned int flags,
 				LOOKUP_OPEN|LOOKUP_CREATE, &nd);
 		if (!ret) {
 			ret = spufs_create(&nd, flags, mode, neighbor);
-			path_release(&nd);
+			path_put(&nd.path);
 		}
 		putname(tmp);
 	}

arch/powerpc/platforms/embedded6xx/Kconfig

@@ -24,7 +24,6 @@ config STORCENTER
 	select MPIC
 	select FSL_SOC
 	select PPC_UDBG_16550 if SERIAL_8250
-	select WANT_DEVICE_TREE
 	select MPC10X_OPENPIC
 	select MPC10X_BRIDGE
 	help
@@ -37,7 +36,6 @@ config MPC7448HPC2
 	select TSI108_BRIDGE
 	select DEFAULT_UIMAGE
 	select PPC_UDBG_16550
-	select WANT_DEVICE_TREE
 	select TSI108_BRIDGE
 	help
 	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
@@ -48,7 +46,6 @@ config PPC_HOLLY
 	depends on EMBEDDED6xx
 	select TSI108_BRIDGE
 	select PPC_UDBG_16550
-	select WANT_DEVICE_TREE
 	select TSI108_BRIDGE
 	help
 	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
@@ -59,7 +56,6 @@ config PPC_PRPMC2800
 	depends on EMBEDDED6xx
 	select MV64X60
 	select NOT_COHERENT_CACHE
-	select WANT_DEVICE_TREE
 	help
 	  This option enables support for the Motorola PrPMC2800 board
 

arch/powerpc/platforms/iseries/vio.c

@@ -75,7 +75,7 @@ static struct property *new_property(const char *name, int length,
 	return np;
 }
 
-static void __init free_property(struct property *np)
+static void free_property(struct property *np)
 {
 	kfree(np);
 }

arch/sh/Kconfig

@@ -93,6 +93,9 @@ config ARCH_NO_VIRT_TO_BUS
 config ARCH_SUPPORTS_AOUT
 	def_bool y
 
+config IO_TRAPPED
+	bool
+
 source "init/Kconfig"
 
 menu "System type"
@@ -312,6 +315,13 @@ config CPU_SUBTYPE_SH7722
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
+config CPU_SUBTYPE_SH7366
+	bool "Support SH7366 processor"
+	select CPU_SH4AL_DSP
+	select CPU_SHX2
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+
 # SH-5 Processor Support
 
 config CPU_SUBTYPE_SH5_101
@@ -456,6 +466,7 @@ config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
 	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
 	help
 	  Select RTS7751R2D if configuring for a Renesas Technology
 	  Sales SH-Graphics board.
@@ -472,6 +483,14 @@ config SH_HIGHLANDER
 	bool "Highlander"
 	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
 	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
 
 config SH_EDOSK7705
 	bool "EDOSK7705"

arch/sh/Kconfig.cpu

@@ -12,6 +12,7 @@ config CPU_LITTLE_ENDIAN
 
 config CPU_BIG_ENDIAN
 	bool "Big Endian"
+	depends on !CPU_SH5
 
 endchoice
 
@@ -87,9 +88,6 @@ config SH64_ID2815_WORKAROUND
 config CPU_HAS_INTEVT
 	bool
 
-config CPU_HAS_MASKREG_IRQ
-	bool
-
 config CPU_HAS_IPR_IRQ
 	bool
 

arch/sh/Kconfig.debug

@@ -29,7 +29,8 @@ config EARLY_SCIF_CONSOLE
 config EARLY_SCIF_CONSOLE_PORT
 	hex
 	depends on EARLY_SCIF_CONSOLE
- 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
+	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
+	default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263

arch/sh/Makefile

@@ -116,6 +116,7 @@ machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
 machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
 machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
+machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
 machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
 machdir-$(CONFIG_SH_7710VOIPGW)			+= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto

arch/sh/boards/renesas/migor/Makefile

+obj-y	 := setup.o

arch/sh/boards/renesas/migor/setup.c

+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = P2SEGADDR(0x10000300),
+		.end    = P2SEGADDR(0x1000030f),
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 32, /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+};
+
+static int __init migor_devices_setup(void)
+{
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+	ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_setup		= migor_setup,
+};

arch/sh/boards/renesas/r7780rp/setup.c

@@ -23,6 +23,7 @@
 #include <asm/clock.h>
 #include <asm/heartbeat.h>
 #include <asm/io.h>
+#include <asm/io_trapped.h>
 
 static struct resource r8a66597_usb_host_resources[] = {
 	[0] = {
@@ -181,13 +182,27 @@ static struct platform_device *r7780rp_devices[] __initdata = {
 	&m66592_usb_peripheral_device,
 	&heartbeat_device,
 #ifndef CONFIG_SH_R7780RP
-	&cf_ide_device,
 	&ax88796_device,
 #endif
 };
 
+/*
+ * The CF is connected using a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
 static int __init r7780rp_devices_setup(void)
 {
+#ifndef CONFIG_SH_R7780RP
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		platform_device_register(&cf_ide_device);
+#endif
 	return platform_add_devices(r7780rp_devices,
 				    ARRAY_SIZE(r7780rp_devices));
 }
@@ -226,34 +241,6 @@ static void r7780rp_power_off(void)
 		ctrl_outw(0x0001, PA_POFF);
 }
 
-static inline unsigned char is_ide_ioaddr(unsigned long addr)
-{
-	return ((cf_ide_resources[0].start <= addr &&
-		 addr <= cf_ide_resources[0].end) ||
-		(cf_ide_resources[1].start <= addr &&
-		 addr <= cf_ide_resources[1].end));
-}
-
-void highlander_writeb(u8 b, void __iomem *addr)
-{
-	unsigned long tmp = (unsigned long __force)addr;
-
-	if (is_ide_ioaddr(tmp))
-		ctrl_outw((u16)b, tmp);
-	else
-		ctrl_outb(b, tmp);
-}
-
-u8 highlander_readb(void __iomem *addr)
-{
-	unsigned long tmp = (unsigned long __force)addr;
-
-	if (is_ide_ioaddr(tmp))
-		return ctrl_inw(tmp) & 0xff;
-	else
-		return ctrl_inb(tmp);
-}
-
 /*
  * Initialize the board
  */
@@ -338,6 +325,4 @@ static struct sh_machine_vector mv_highlander __initmv = {
 	.mv_setup		= highlander_setup,
 	.mv_init_irq		= highlander_init_irq,
 	.mv_irq_demux		= highlander_irq_demux,
-	.mv_readb		= highlander_readb,
-	.mv_writeb		= highlander_writeb,
 };

arch/sh/boards/renesas/rts7751r2d/setup.c

@@ -21,6 +21,7 @@
 #include <asm/machvec.h>
 #include <asm/rts7751r2d.h>
 #include <asm/io.h>
+#include <asm/io_trapped.h>
 #include <asm/spi.h>
 
 static struct resource cf_ide_resources[] = {
@@ -214,13 +215,25 @@ static struct platform_device *rts7751r2d_devices[] __initdata = {
 	&uart_device,
 	&sm501_device,
 #endif
-	&cf_ide_device,
 	&heartbeat_device,
 	&spi_sh_sci_device,
 };
 
+/*
+ * The CF is connected with a 16-bit bus where 8-bit operations are
+ * unsupported. The linux ata driver is however using 8-bit operations, so
+ * insert a trapped io filter to convert 8-bit operations into 16-bit.
+ */
+static struct trapped_io cf_trapped_io = {
+	.resource		= cf_ide_resources,
+	.num_resources		= 2,
+	.minimum_bus_width	= 16,
+};
+
 static int __init rts7751r2d_devices_setup(void)
 {
+	if (register_trapped_io(&cf_trapped_io) == 0)
+		platform_device_register(&cf_ide_device);
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
 	return platform_add_devices(rts7751r2d_devices,
 				    ARRAY_SIZE(rts7751r2d_devices));
@@ -232,34 +245,6 @@ static void rts7751r2d_power_off(void)
 	ctrl_outw(0x0001, PA_POWOFF);
 }
 
-static inline unsigned char is_ide_ioaddr(unsigned long addr)
-{
-	return ((cf_ide_resources[0].start <= addr &&
-		 addr <= cf_ide_resources[0].end) ||
-		(cf_ide_resources[1].start <= addr &&
-		 addr <= cf_ide_resources[1].end));
-}
-
-void rts7751r2d_writeb(u8 b, void __iomem *addr)
-{
-	unsigned long tmp = (unsigned long __force)addr;
-
-	if (is_ide_ioaddr(tmp))
-		ctrl_outw((u16)b, tmp);
-	else
-		ctrl_outb(b, tmp);
-}
-
-u8 rts7751r2d_readb(void __iomem *addr)
-{
-	unsigned long tmp = (unsigned long __force)addr;
-
-	if (is_ide_ioaddr(tmp))
-		return ctrl_inw(tmp) & 0xff;
-	else
-		return ctrl_inb(tmp);
-}
-
 /*
  * Initialize the board
  */
@@ -310,6 +295,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_setup		= rts7751r2d_setup,
 	.mv_init_irq		= init_rts7751r2d_IRQ,
 	.mv_irq_demux		= rts7751r2d_irq_demux,
-	.mv_writeb		= rts7751r2d_writeb,
-	.mv_readb		= rts7751r2d_readb,
 };

arch/sh/boards/renesas/sdk7780/Kconfig

@@ -4,13 +4,6 @@ choice
 	prompt "SDK7780 options"
 	default SH_SDK7780_BASE
 
-config SH_SDK7780_STANDALONE
-	bool "SDK7780 board support"
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Selecting this option will enable support for the
-	  standalone version of the SDK7780. If in doubt, say Y.
-
 config SH_SDK7780_BASE
 	bool "SDK7780 with base-board support"
 	depends on CPU_SUBTYPE_SH7780

arch/sh/cchips/hd6446x/hd64465/setup.c

@@ -17,10 +17,8 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/io.h>
 #include <asm/irq.h>
-
 #include <asm/hd64465/hd64465.h>
 
 static void disable_hd64465_irq(unsigned int irq)
@@ -28,51 +26,45 @@ static void disable_hd64465_irq(unsigned int irq)
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
 
-    	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
+	pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
 	nimr = inw(HD64465_REG_NIMR);
 	nimr |= mask;
 	outw(nimr, HD64465_REG_NIMR);
 }
 
-
 static void enable_hd64465_irq(unsigned int irq)
 {
 	unsigned short nimr;
 	unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);
 
-    	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
+	pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
 	nimr = inw(HD64465_REG_NIMR);
 	nimr &= ~mask;
 	outw(nimr, HD64465_REG_NIMR);
 }
 
-
 static void mask_and_ack_hd64465(unsigned int irq)
 {
 	disable_hd64465_irq(irq);
 }
 
-
 static void end_hd64465_irq(unsigned int irq)
 {
 	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		enable_hd64465_irq(irq);
 }
 
-
 static unsigned int startup_hd64465_irq(unsigned int irq)
-{ 
+{
 	enable_hd64465_irq(irq);
 	return 0;
 }
 
-
 static void shutdown_hd64465_irq(unsigned int irq)
 {
 	disable_hd64465_irq(irq);
 }
 
-
 static struct hw_interrupt_type hd64465_irq_type = {
 	.typename	= "HD64465-IRQ",
 	.startup	= startup_hd64465_irq,
@@ -83,7 +75,6 @@ static struct hw_interrupt_type hd64465_irq_type = {
 	.end		= end_hd64465_irq,
 };
 
-
 static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
 {
 	printk(KERN_INFO
@@ -93,9 +84,6 @@ static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-
-/*====================================================*/
-
 /*
  * Support for a secondary IRQ demux step.  This is necessary
  * because the HD64465 presents a very thin interface to the
@@ -103,8 +91,7 @@ static irqreturn_t hd64465_interrupt(int irq, void *dev_id)
  * normally done in hardware by other PCMCIA host bridges is
  * instead done in software.
  */
-static struct
-{
+static struct {
     int (*func)(int, void *);
     void *dev;
 } hd64465_demux[HD64465_IRQ_NUM];
@@ -112,19 +99,17 @@ static struct
 void hd64465_register_irq_demux(int irq,
 		int (*demux)(int irq, void *dev), void *dev)
 {
-    	hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
-    	hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
+	hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
+	hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
 }
 EXPORT_SYMBOL(hd64465_register_irq_demux);
 
 void hd64465_unregister_irq_demux(int irq)
 {
-    	hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
+	hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
 }
 EXPORT_SYMBOL(hd64465_unregister_irq_demux);
 
-
-
 int hd64465_irq_demux(int irq)
 {
 	if (irq == CONFIG_HD64465_IRQ) {
@@ -132,16 +117,16 @@ int hd64465_irq_demux(int irq)
 		unsigned short nirr = inw(HD64465_REG_NIRR);
 		unsigned short nimr = inw(HD64465_REG_NIMR);
 
-    	    	pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
+		pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
 		nirr &= ~nimr;
 		for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
 		    if (nirr & bit)
-		    	break;
+			break;
 
-    	    	if (i < HD64465_IRQ_NUM) {
+		if (i < HD64465_IRQ_NUM) {
 		    irq = HD64465_IRQ_BASE + i;
-    	    	    if (hd64465_demux[i].func != 0)
-		    	irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
+		    if (hd64465_demux[i].func != 0)
+			irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
 		}
 	}
 	return irq;
@@ -154,7 +139,6 @@ static struct irqaction irq0  = {
 	.name = "HD64465",
 };
 
-
 static int __init setup_hd64465(void)
 {
 	int i;
@@ -176,8 +160,8 @@ static int __init setup_hd64465(void)
 
 	rev = inw(HD64465_REG_SRR);
 	printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
-	       
-	outw(0xffff, HD64465_REG_NIMR); 	/* mask all interrupts */
+
+	outw(0xffff, HD64465_REG_NIMR);	/* mask all interrupts */
 
 	for (i = 0; i < HD64465_IRQ_NUM ; i++) {
 		irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type;
@@ -185,16 +169,13 @@ static int __init setup_hd64465(void)
 
 	setup_irq(CONFIG_HD64465_IRQ, &irq0);
 
-#ifdef CONFIG_SERIAL
 	/* wake up the UART from STANDBY at this point */
 	smscr = inw(HD64465_REG_SMSCR);
 	outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);
 
 	/* remap IO ports for first ISA serial port to HD64465 UART */
 	hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
-#endif
 
 	return 0;
 }
-
 module_init(setup_hd64465);

arch/sh/configs/se7705_defconfig

@@ -231,7 +231,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_SH_DSP is not set
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_PINT_IRQ=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 

arch/sh/drivers/dma/dma-api.c

@@ -350,7 +350,7 @@ int register_dmac(struct dma_info *info)
 
 	BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
 
-	info->pdev = platform_device_register_simple((char *)info->name, -1,
+	info->pdev = platform_device_register_simple(info->name, -1,
 						     NULL, 0);
 	if (IS_ERR(info->pdev))
 		return PTR_ERR(info->pdev);

arch/sh/drivers/pci/fixups-lboxre2.c

@@ -18,7 +18,7 @@ int pci_fixup_pcic(void)
 {
 	unsigned long bcr1, mcr;
 
-	bcr1 = inl(SH7751_BCR1);
+	bcr1 = ctrl_inl(SH7751_BCR1);
 	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
 	pci_write_reg(bcr1, SH4_PCIBCR1);
 
@@ -28,7 +28,7 @@ int pci_fixup_pcic(void)
 	pci_write_reg(0xfb900047, SH7751_PCICONF1);
 	pci_write_reg(0xab000001, SH7751_PCICONF4);
 
-	mcr = inl(SH7751_MCR);
+	mcr = ctrl_inl(SH7751_MCR);
 	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
 	pci_write_reg(mcr, SH4_PCIMCR);
 

arch/sh/drivers/pci/fixups-rts7751r2d.c

@@ -19,7 +19,7 @@ int pci_fixup_pcic(void)
 {
 	unsigned long bcr1, mcr;
 
-	bcr1 = inl(SH7751_BCR1);
+	bcr1 = ctrl_inl(SH7751_BCR1);
 	bcr1 |= 0x40080000;	/* Enable Bit 19 BREQEN, set PCIC to slave */
 	pci_write_reg(bcr1, SH4_PCIBCR1);
 
@@ -30,7 +30,7 @@ int pci_fixup_pcic(void)
 	pci_write_reg(0xfb900047, SH7751_PCICONF1);
 	pci_write_reg(0xab000001, SH7751_PCICONF4);
 
-	mcr = inl(SH7751_MCR);
+	mcr = ctrl_inl(SH7751_MCR);
 	mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF;
 	pci_write_reg(mcr, SH4_PCIMCR);
 

arch/sh/drivers/pci/ops-dreamcast.c

@@ -83,9 +83,9 @@ static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
-		case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
-		case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
-		case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
+		case 1: *val = ctrl_inb(GAPSPCI_BBA_CONFIG+where); break;
+		case 2: *val = ctrl_inw(GAPSPCI_BBA_CONFIG+where); break;
+		case 4: *val = ctrl_inl(GAPSPCI_BBA_CONFIG+where); break;
 	}	
 
         return PCIBIOS_SUCCESSFUL;
@@ -97,9 +97,9 @@ static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
-		case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
-		case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
-		case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
+		case 1: ctrl_outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
+		case 2: ctrl_outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
+		case 4: ctrl_outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
 	}
 
         return PCIBIOS_SUCCESSFUL;
@@ -127,36 +127,36 @@ int __init gapspci_init(void)
 	 */
 
 	for (i=0; i<16; i++)
-		idbuf[i] = inb(GAPSPCI_REGS+i);
+		idbuf[i] = ctrl_inb(GAPSPCI_REGS+i);
 
 	if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
 		return -ENODEV;
 
-	outl(0x5a14a501, GAPSPCI_REGS+0x18);
+	ctrl_outl(0x5a14a501, GAPSPCI_REGS+0x18);
 
 	for (i=0; i<1000000; i++)
 		;
 
-	if (inl(GAPSPCI_REGS+0x18) != 1)
+	if (ctrl_inl(GAPSPCI_REGS+0x18) != 1)
 		return -EINVAL;
 
-	outl(0x01000000, GAPSPCI_REGS+0x20);
-	outl(0x01000000, GAPSPCI_REGS+0x24);
+	ctrl_outl(0x01000000, GAPSPCI_REGS+0x20);
+	ctrl_outl(0x01000000, GAPSPCI_REGS+0x24);
 
-	outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
-	outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
+	ctrl_outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
+	ctrl_outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
 
-	outl(1, GAPSPCI_REGS+0x14);
-	outl(1, GAPSPCI_REGS+0x34);
+	ctrl_outl(1, GAPSPCI_REGS+0x14);
+	ctrl_outl(1, GAPSPCI_REGS+0x34);
 
 	/* Setting Broadband Adapter */
-	outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
-	outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
-	outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
-	outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
-	outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
-	outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
-	outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
+	ctrl_outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
+	ctrl_outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
+	ctrl_outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
+	ctrl_outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
+	ctrl_outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
+	ctrl_outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
+	ctrl_outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
 
 	return 0;
 }

arch/sh/drivers/pci/ops-rts7751r2d.c

@@ -33,7 +33,7 @@ int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
 static struct resource sh7751_io_resource = {
 	.name	= "SH7751_IO",
 	.start	= 0x4000,
-	.end	= 0x4000 + SH7751_PCI_IO_SIZE - 1,
+	.end	= SH7751_PCI_IO_SIZE - 1,
 	.flags	= IORESOURCE_IO
 };
 
@@ -68,6 +68,7 @@ static struct sh4_pci_address_map sh7751_pci_map = {
 
 int __init pcibios_init_platform(void)
 {
+	__set_io_port_base(SH7751_PCI_IO_BASE);
 	return sh7751_pcic_init(&sh7751_pci_map);
 }
 

arch/sh/drivers/pci/pci-sh4.h

@@ -172,11 +172,11 @@ struct sh4_pci_address_map {
 
 static inline void pci_write_reg(unsigned long val, unsigned long reg)
 {
-	outl(val, PCI_REG(reg));
+	ctrl_outl(val, PCI_REG(reg));
 }
 
 static inline unsigned long pci_read_reg(unsigned long reg)
 {
-	return inl(PCI_REG(reg));
+	return ctrl_inl(PCI_REG(reg));
 }
 #endif /* __PCI_SH4_H */

arch/sh/drivers/pci/pci-sh7751.c

@@ -58,7 +58,7 @@ static int __init __area_sdram_check(unsigned int area)
 {
 	u32 word;
 
-	word = inl(SH7751_BCR1);
+	word = ctrl_inl(SH7751_BCR1);
 	/* check BCR for SDRAM in area */
 	if (((word >> area) & 1) == 0) {
 		printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%x\n",
@@ -67,7 +67,7 @@ static int __init __area_sdram_check(unsigned int area)
 	}
 	pci_write_reg(word, SH4_PCIBCR1);
 
-	word = (u16)inw(SH7751_BCR2);
+	word = (u16)ctrl_inw(SH7751_BCR2);
 	/* check BCR2 for 32bit SDRAM interface*/
 	if (((word >> (area << 1)) & 0x3) != 0x3) {
 		printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%x\n",
@@ -85,9 +85,9 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 	u32 word;
 
 	/* Set the BCR's to enable PCI access */
-	reg = inl(SH7751_BCR1);
+	reg = ctrl_inl(SH7751_BCR1);
 	reg |= 0x80000;
-	outl(reg, SH7751_BCR1);
+	ctrl_outl(reg, SH7751_BCR1);
 
 	/* Turn the clocks back on (not done in reset)*/
 	pci_write_reg(0, SH4_PCICLKR);
@@ -179,13 +179,13 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 		return 0;
 
 	/* configure the wait control registers */
-	word = inl(SH7751_WCR1);
+	word = ctrl_inl(SH7751_WCR1);
 	pci_write_reg(word, SH4_PCIWCR1);
-	word = inl(SH7751_WCR2);
+	word = ctrl_inl(SH7751_WCR2);
 	pci_write_reg(word, SH4_PCIWCR2);
-	word = inl(SH7751_WCR3);
+	word = ctrl_inl(SH7751_WCR3);
 	pci_write_reg(word, SH4_PCIWCR3);
-	word = inl(SH7751_MCR);
+	word = ctrl_inl(SH7751_MCR);
 	pci_write_reg(word, SH4_PCIMCR);
 
 	/* NOTE: I'm ignoring the PCI error IRQs for now..

arch/sh/drivers/pci/pci-sh7780.c

@@ -52,7 +52,7 @@ static int __init sh7780_pci_init(void)
 
 	pr_debug("PCI: Starting intialization.\n");
 
-	outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
+	ctrl_outl(0x00000001, SH7780_PCI_VCR2); /* Enable PCIC */
 
 	/* check for SH7780/SH7780R hardware */
 	id = pci_read_reg(SH7780_PCIVID);

arch/sh/kernel/Makefile_32

@@ -22,5 +22,6 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror

arch/sh/kernel/Makefile_64

@@ -18,5 +18,6 @@ obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror

arch/sh/kernel/cpu/irq/Makefile

@@ -6,4 +6,3 @@ obj-y	+= intc.o
 obj-$(CONFIG_SUPERH32)			+= imask.o
 obj-$(CONFIG_CPU_SH5)			+= intc-sh5.o
 obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
-obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o

arch/sh/kernel/cpu/irq/intc-sh5.c

@@ -75,21 +75,6 @@ int intc_evt_to_irq[(0xE20/0x20)+1] = {
 	-1, -1				/* 0xE00 - 0xE20 */
 };
 
-/*
- * Opposite mapper.
- */
-static int IRQ_to_vectorN[NR_INTC_IRQS] = {
-	0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
-	  -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53,	/*  8-15 */
-	0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
-	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38,	/* 32-39 */
-        0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
-	  -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
-
-};
-
 static unsigned long intc_virt;
 
 static unsigned int startup_intc_irq(unsigned int irq);
@@ -176,6 +161,18 @@ void make_intc_irq(unsigned int irq)
 }
 
 #if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+static int IRQ_to_vectorN[NR_INTC_IRQS] = {
+	0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /*  0- 7 */
+	  -1,   -1,   -1,   -1, 0x50, 0x51, 0x52, 0x53,	/*  8-15 */
+	0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36,   -1, /* 16-23 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 24-31 */
+	0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38,	/* 32-39 */
+        0x39, 0x3A, 0x3B,   -1,   -1,   -1,   -1,   -1, /* 40-47 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1,   -1, /* 48-55 */
+	  -1,   -1,   -1,   -1,   -1,   -1,   -1, 0x2B, /* 56-63 */
+
+};
+
 int intc_irq_describe(char* p, int irq)
 {
 	if (irq < NR_INTC_IRQS)

arch/sh/kernel/cpu/irq/maskreg.c

-/*
- * Interrupt handling for Simple external interrupt mask register
- *
- * Copyright (C) 2001 A&D Co., Ltd. <http://www.aandd.co.jp>
- *
- * This is for the machine which have single 16 bit register
- * for masking external IRQ individually.
- * Each bit of the register is for masking each interrupt.
- *
- * This file may be copied or modified under the terms of the GNU
- * General Public License.  See linux/COPYING for more information.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-/* address of external interrupt mask register */
-unsigned long irq_mask_register;
-
-/* forward declaration */
-static unsigned int startup_maskreg_irq(unsigned int irq);
-static void shutdown_maskreg_irq(unsigned int irq);
-static void enable_maskreg_irq(unsigned int irq);
-static void disable_maskreg_irq(unsigned int irq);
-static void mask_and_ack_maskreg(unsigned int);
-static void end_maskreg_irq(unsigned int irq);
-
-/* hw_interrupt_type */
-static struct hw_interrupt_type maskreg_irq_type = {
-	.typename = "Mask Register",
-	.startup = startup_maskreg_irq,
-	.shutdown = shutdown_maskreg_irq,
-	.enable = enable_maskreg_irq,
-	.disable = disable_maskreg_irq,
-	.ack = mask_and_ack_maskreg,
-	.end = end_maskreg_irq
-};
-
-/* actual implementation */
-static unsigned int startup_maskreg_irq(unsigned int irq)
-{
-	enable_maskreg_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_maskreg_irq(unsigned int irq)
-{
-	disable_maskreg_irq(irq);
-}
-
-static void disable_maskreg_irq(unsigned int irq)
-{
-	unsigned short val, mask = 0x01 << irq;
-
-	BUG_ON(!irq_mask_register);
-
-	/* Set "irq"th bit */
-	val = ctrl_inw(irq_mask_register);
-	val |= mask;
-	ctrl_outw(val, irq_mask_register);
-}
-
-static void enable_maskreg_irq(unsigned int irq)
-{
-	unsigned short val, mask = ~(0x01 << irq);
-
-	BUG_ON(!irq_mask_register);
-
-	/* Clear "irq"th bit */
-	val = ctrl_inw(irq_mask_register);
-	val &= mask;
-	ctrl_outw(val, irq_mask_register);
-}
-
-static void mask_and_ack_maskreg(unsigned int irq)
-{
-	disable_maskreg_irq(irq);
-}
-
-static void end_maskreg_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_maskreg_irq(irq);
-}
-
-void make_maskreg_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].handler = &maskreg_irq_type;
-	disable_maskreg_irq(irq);
-}

arch/sh/kernel/cpu/sh4/probe.c

@@ -126,12 +126,18 @@ int __init detect_cpu_and_cache_system(void)
 					  CPU_HAS_LLSC;
 		break;
 	case 0x3008:
-		if (prr == 0xa0) {
+		if (prr == 0xa0 || prr == 0xa1) {
 			boot_cpu_data.type = CPU_SH7722;
 			boot_cpu_data.icache.ways = 4;
 			boot_cpu_data.dcache.ways = 4;
 			boot_cpu_data.flags |= CPU_HAS_LLSC;
 		}
+		else if (prr == 0x70) {
+			boot_cpu_data.type = CPU_SH7366;
+			boot_cpu_data.icache.ways = 4;
+			boot_cpu_data.dcache.ways = 4;
+			boot_cpu_data.flags |= CPU_HAS_LLSC;
+		}
 		break;
 	case 0x4000:	/* 1st cut */
 	case 0x4001:	/* 2nd cut */

arch/sh/kernel/cpu/sh4a/Makefile

@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
 # SMP setup
@@ -21,6 +22,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
 obj-y			+= $(clock-y)

arch/sh/kernel/cpu/sh4a/clock-sh7722.c

 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 support for the clock framework
+ * SH7722 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -417,15 +417,19 @@ static int sh7722_siu_which(struct clk *clk)
 		return 0;
 	if (!strcmp(clk->name, "siu_b_clk"))
 		return 1;
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	if (!strcmp(clk->name, "irda_clk"))
 		return 2;
+#endif
 	return -EINVAL;
 }
 
 static unsigned long sh7722_siu_regs[] = {
 	[0] = SCLKACR,
 	[1] = SCLKBCR,
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	[2] = IrDACLKCR,
+#endif
 };
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
@@ -571,10 +575,12 @@ static struct clk sh7722_siu_b_clock = {
 	.ops = &sh7722_siu_clk_ops,
 };
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
 	.name = "irda_clk",
 	.ops = &sh7722_siu_clk_ops,
 };
+#endif
 
 static struct clk sh7722_video_clock = {
 	.name = "video_clk",
@@ -588,7 +594,9 @@ static struct clk *sh7722_clocks[] = {
 	&sh7722_sdram_clock,
 	&sh7722_siu_a_clock,
 	&sh7722_siu_b_clock,
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	&sh7722_irda_clock,
+#endif
 	&sh7722_video_clock,
 };
 

arch/sh/kernel/cpu/sh5/probe.c

@@ -20,19 +20,18 @@ int __init detect_cpu_and_cache_system(void)
 {
 	unsigned long long cir;
 
-	/* Do peeks in real mode to avoid having to set up a mapping for the
-	   WPC registers. On SH5-101 cut2, such a mapping would be exposed to
-	   an address translation erratum which would make it hard to set up
-	   correctly. */
+	/*
+	 * Do peeks in real mode to avoid having to set up a mapping for
+	 * the WPC registers. On SH5-101 cut2, such a mapping would be
+	 * exposed to an address translation erratum which would make it
+	 * hard to set up correctly.
+	 */
 	cir = peek_real_address_q(0x0d000008);
-	if ((cir & 0xffff) == 0x5103) {
+	if ((cir & 0xffff) == 0x5103)
 		boot_cpu_data.type = CPU_SH5_103;
-	} else if (((cir >> 32) & 0xffff) == 0x51e2) {
+	else if (((cir >> 32) & 0xffff) == 0x51e2)
 		/* CPU.VCR aliased at CIR address on SH5-101 */
 		boot_cpu_data.type = CPU_SH5_101;
-	} else {
-		boot_cpu_data.type = CPU_SH_NONE;
-	}
 
 	/*
 	 * First, setup some sane values for the I-cache.
@@ -40,37 +39,33 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.icache.ways		= 4;
 	boot_cpu_data.icache.sets		= 256;
 	boot_cpu_data.icache.linesz		= L1_CACHE_BYTES;
+	boot_cpu_data.icache.way_incr		= (1 << 13);
+	boot_cpu_data.icache.entry_shift	= 5;
+	boot_cpu_data.icache.way_size		= boot_cpu_data.icache.sets *
+						  boot_cpu_data.icache.linesz;
+	boot_cpu_data.icache.entry_mask		= 0x1fe0;
+	boot_cpu_data.icache.flags		= 0;
 
-#if 0
 	/*
-	 * FIXME: This can probably be cleaned up a bit as well.. for example,
-	 * do we really need the way shift _and_ the way_step_shift ?? Judging
-	 * by the existing code, I would guess no.. is there any valid reason
-	 * why we need to be tracking this around?
+	 * Next, setup some sane values for the D-cache.
+	 *
+	 * On the SH5, these are pretty consistent with the I-cache settings,
+	 * so we just copy over the existing definitions.. these can be fixed
+	 * up later, especially if we add runtime CPU probing.
+	 *
+	 * Though in the meantime it saves us from having to duplicate all of
+	 * the above definitions..
 	 */
-	boot_cpu_data.icache.way_shift		= 13;
-	boot_cpu_data.icache.entry_shift	= 5;
-	boot_cpu_data.icache.set_shift		= 4;
-	boot_cpu_data.icache.way_step_shift	= 16;
-	boot_cpu_data.icache.asid_shift		= 2;
+	boot_cpu_data.dcache		= boot_cpu_data.icache;
 
 	/*
-	 * way offset = cache size / associativity, so just don't factor in
-	 * associativity in the first place..
+	 * Setup any cache-related flags here
 	 */
-	boot_cpu_data.icache.way_ofs	= boot_cpu_data.icache.sets *
-					  boot_cpu_data.icache.linesz;
-
-	boot_cpu_data.icache.asid_mask		= 0x3fc;
-	boot_cpu_data.icache.idx_mask		= 0x1fe0;
-	boot_cpu_data.icache.epn_mask		= 0xffffe000;
+#if defined(CONFIG_CACHE_WRITETHROUGH)
+	set_bit(SH_CACHE_MODE_WT, &(boot_cpu_data.dcache.flags));
+#elif defined(CONFIG_CACHE_WRITEBACK)
+	set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
 #endif
 
-	boot_cpu_data.icache.flags		= 0;
-
-	/* A trivial starting point.. */
-	memcpy(&boot_cpu_data.dcache,
-	       &boot_cpu_data.icache, sizeof(struct cache_info));
-
 	return 0;
 }

arch/sh/kernel/io.c

@@ -63,7 +63,13 @@ EXPORT_SYMBOL(memset_io);
 
 void __iomem *ioport_map(unsigned long port, unsigned int nr)
 {
-	return sh_mv.mv_ioport_map(port, nr);
+	void __iomem *ret;
+
+	ret = __ioport_map_trapped(port, nr);
+	if (ret)
+		return ret;
+
+	return __ioport_map(port, nr);
 }
 EXPORT_SYMBOL(ioport_map);
 

arch/sh/kernel/irq.c

@@ -248,9 +248,6 @@ asmlinkage void do_softirq(void)
 
 void __init init_IRQ(void)
 {
-#ifdef CONFIG_CPU_HAS_PINT_IRQ
-	init_IRQ_pint();
-#endif
 	plat_irq_setup();
 
 	/* Perform the machine specific initialisation */

arch/sh/kernel/process_64.c

@@ -623,6 +623,7 @@ extern void interruptible_sleep_on(wait_queue_head_t *q);
 
 #define mid_sched	((unsigned long) interruptible_sleep_on)
 
+#ifdef CONFIG_FRAME_POINTER
 static int in_sh64_switch_to(unsigned long pc)
 {
 	extern char __sh64_switch_to_end;
@@ -631,12 +632,10 @@ static int in_sh64_switch_to(unsigned long pc)
 	return (pc >= (unsigned long) sh64_switch_to) &&
 	       (pc < (unsigned long) &__sh64_switch_to_end);
 }
+#endif
 
 unsigned long get_wchan(struct task_struct *p)
 {
-	unsigned long schedule_fp;
-	unsigned long sh64_switch_to_fp;
-	unsigned long schedule_caller_pc;
 	unsigned long pc;
 
 	if (!p || p == current || p->state == TASK_RUNNING)
@@ -649,6 +648,10 @@ unsigned long get_wchan(struct task_struct *p)
 
 #ifdef CONFIG_FRAME_POINTER
 	if (in_sh64_switch_to(pc)) {
+		unsigned long schedule_fp;
+		unsigned long sh64_switch_to_fp;
+		unsigned long schedule_caller_pc;
+
 		sh64_switch_to_fp = (long) p->thread.sp;
 		/* r14 is saved at offset 4 in the sh64_switch_to frame */
 		schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4);

arch/sh/kernel/ptrace_32.c

@@ -220,7 +220,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		dp = ((unsigned long) child) + THREAD_SIZE -
 			 sizeof(struct pt_dspregs);
 		if (*((int *) (dp - 4)) == SR_FD) {
-			copy_to_user(addr, (void *) dp,
+			copy_to_user((void *)addr, (void *) dp,
 				sizeof(struct pt_dspregs));
 			ret = 0;
 		}
@@ -234,7 +234,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		dp = ((unsigned long) child) + THREAD_SIZE -
 			 sizeof(struct pt_dspregs);
 		if (*((int *) (dp - 4)) == SR_FD) {
-			copy_from_user((void *) dp, addr,
+			copy_from_user((void *) dp, (void *)addr,
 				sizeof(struct pt_dspregs));
 			ret = 0;
 		}