firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()

qcom_scm_set_cold/warm_boot_addr() currently take a cpumask parameter,
but it's not very useful because at the end we always set the same entry
address for all CPUs. This also allows speeding up probe of
cpuidle-qcom-spm a bit because only one SCM call needs to be made to
the TrustZone firmware, instead of one per CPU.

The main reason for this change is that it allows implementing the
"multi-cluster" variant of the set_boot_addr() call more easily
without having to rely on functions that break in certain build
configurations or that are not exported to modules.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201130505.257379-4-stephan@gerhold.net

arch/arm/mach-qcom/platsmp.c

@@ -357,8 +357,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu;
 
-	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
-					cpu_present_mask)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;

drivers/cpuidle/cpuidle-qcom-spm.c

@@ -122,10 +122,6 @@ static int spm_cpuidle_register(struct device *cpuidle_dev, int cpu)
 	if (ret <= 0)
 		return ret ? : -ENODEV;
 
-	ret = qcom_scm_set_warm_boot_addr(cpu_resume_arm, cpumask_of(cpu));
-	if (ret)
-		return ret;
-
 	return cpuidle_register(&data->cpuidle_driver, NULL);
 }
 
@@ -136,6 +132,10 @@ static int spm_cpuidle_drv_probe(struct platform_device *pdev)
 	if (!qcom_scm_is_available())
 		return -EPROBE_DEFER;
 
+	ret = qcom_scm_set_warm_boot_addr(cpu_resume_arm);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "set warm boot addr failed");
+
 	for_each_possible_cpu(cpu) {
 		ret = spm_cpuidle_register(&pdev->dev, cpu);
 		if (ret && ret != -ENODEV) {

drivers/firmware/qcom_scm.c

@@ -243,8 +243,7 @@ static bool __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
 	return ret ? false : !!res.result[0];
 }
 
-static int qcom_scm_set_boot_addr(void *entry, const cpumask_t *cpus,
-				  const u8 *cpu_bits)
+static int qcom_scm_set_boot_addr(void *entry, const u8 *cpu_bits)
 {
 	int cpu;
 	unsigned int flags = 0;
@@ -255,7 +254,7 @@ static int qcom_scm_set_boot_addr(void *entry, const cpumask_t *cpus,
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 
-	for_each_cpu(cpu, cpus) {
+	for_each_present_cpu(cpu) {
 		if (cpu >= QCOM_SCM_BOOT_MAX_CPUS)
 			return -EINVAL;
 		flags |= cpu_bits[cpu];
@@ -268,27 +267,25 @@ static int qcom_scm_set_boot_addr(void *entry, const cpumask_t *cpus,
 }
 
 /**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
+ * qcom_scm_set_warm_boot_addr() - Set the warm boot address for all cpus
  * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
  *
  * Set the Linux entry point for the SCM to transfer control to when coming
  * out of a power down. CPU power down may be executed on cpuidle or hotplug.
  */
-int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
+int qcom_scm_set_warm_boot_addr(void *entry)
 {
-	return qcom_scm_set_boot_addr(entry, cpus, qcom_scm_cpu_warm_bits);
+	return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_warm_bits);
 }
 EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
 
 /**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
+ * qcom_scm_set_cold_boot_addr() - Set the cold boot address for all cpus
  * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
  */
-int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int qcom_scm_set_cold_boot_addr(void *entry)
 {
-	return qcom_scm_set_boot_addr(entry, cpus, qcom_scm_cpu_cold_bits);
+	return qcom_scm_set_boot_addr(entry, qcom_scm_cpu_cold_bits);
 }
 EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
 

include/linux/qcom_scm.h

@@ -63,8 +63,8 @@ enum qcom_scm_ice_cipher {
 
 extern bool qcom_scm_is_available(void);
 
-extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
-extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
+extern int qcom_scm_set_cold_boot_addr(void *entry);
+extern int qcom_scm_set_warm_boot_addr(void *entry);
 extern void qcom_scm_cpu_power_down(u32 flags);
 extern int qcom_scm_set_remote_state(u32 state, u32 id);