Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine updates from Vinod Koul:
 "For dmaengine contributions we have:
   - designware cleanup by Andy
   - my series moving device_control users to dmanegine_xxx APIs for
     later removal of device_control API
   - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma
     etc"

* 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits)
  serial: atmel: add missing dmaengine header
  dmaengine: remove FSLDMA_EXTERNAL_START
  dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method
  carma-fpga: move to fsl_dma_external_start()
  carma-fpga: use dmaengine_xxx() API
  dmaengine: freescale: add and export fsl_dma_external_start()
  dmaengine: add dmaengine_prep_dma_sg() helper
  video: mx3fb: use dmaengine_terminate_all() API
  serial: sh-sci: use dmaengine_terminate_all() API
  net: ks8842: use dmaengine_terminate_all() API
  mtd: sh_flctl: use dmaengine_terminate_all() API
  mtd: fsmc_nand: use dmaengine_terminate_all() API
  V4L2: mx3_camer: use dmaengine_pause() API
  dmaengine: coh901318: use dmaengine_terminate_all() API
  pata_arasan_cf: use dmaengine_terminate_all() API
  dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause()
  dmaengine: dw: export probe()/remove() and Co to users
  dmaengine: dw: enable and disable controller when needed
  dmaengine: dw: always export dw_dma_{en,dis}able
  dmaengine: dw: introduce dw_dma_on() helper
  ...

Documentation/devicetree/bindings/dma/qcom_adm.txt

+QCOM ADM DMA Controller
+
+Required properties:
+- compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
+- reg: Address range for DMA registers
+- interrupts: Should contain one interrupt shared by all channels
+- #dma-cells: must be <2>.  First cell denotes the channel number.  Second cell
+  denotes CRCI (client rate control interface) flow control assignment.
+- clocks: Should contain the core clock and interface clock.
+- clock-names: Must contain "core" for the core clock and "iface" for the
+  interface clock.
+- resets: Must contain an entry for each entry in reset names.
+- reset-names: Must include the following entries:
+  - clk
+  - c0
+  - c1
+  - c2
+- qcom,ee: indicates the security domain identifier used in the secure world.
+
+Example:
+		adm_dma: dma@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <0 170 0>;
+			#dma-cells = <2>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				<&gcc ADM0_C0_RESET>,
+				<&gcc ADM0_C1_RESET>,
+				<&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "c0", "c1", "c2";
+			qcom,ee = <0>;
+		};
+
+DMA clients must use the format descripted in the dma.txt file, using a three
+cell specifier for each channel.
+
+Each dmas request consists of 3 cells:
+ 1. phandle pointing to the DMA controller
+ 2. channel number
+ 3. CRCI assignment, if applicable.  If no CRCI flow control is required, use 0.
+    The CRCI is used for flow control.  It identifies the peripheral device that
+    is the source/destination for the transferred data.
+
+Example:
+
+	spi4: spi@1a280000 {
+		status = "ok";
+		spi-max-frequency = <50000000>;
+
+		pinctrl-0 = <&spi_pins>;
+		pinctrl-names = "default";
+
+		cs-gpios = <&qcom_pinmux 20 0>;
+
+		dmas = <&adm_dma 6 9>,
+			<&adm_dma 5 10>;
+		dma-names = "rx", "tx";
+	};

Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt

+Xilinx AXI DMA engine, it does transfers between memory and AXI4 stream
+target devices. It can be configured to have one channel or two channels.
+If configured as two channels, one is to transmit to the device and another
+is to receive from the device.
+
+Required properties:
+- compatible: Should be "xlnx,axi-dma-1.00.a"
+- #dma-cells: Should be <1>, see "dmas" property below
+- reg: Should contain DMA registers location and length.
+- dma-channel child node: Should have atleast one channel and can have upto
+	two channels per device. This node specifies the properties of each
+	DMA channel (see child node properties below).
+
+Optional properties:
+- xlnx,include-sg: Tells whether configured for Scatter-mode in
+	the hardware.
+
+Required child node properties:
+- compatible: It should be either "xlnx,axi-dma-mm2s-channel" or
+	"xlnx,axi-dma-s2mm-channel".
+- interrupts: Should contain per channel DMA interrupts.
+- xlnx,datawidth: Should contain the stream data width, take values
+	{32,64...1024}.
+
+Option child node properties:
+- xlnx,include-dre: Tells whether hardware is configured for Data
+	Realignment Engine.
+
+Example:
+++++++++
+
+axi_dma_0: axidma@40400000 {
+	compatible = "xlnx,axi-dma-1.00.a";
+	#dma_cells = <1>;
+	reg = < 0x40400000 0x10000 >;
+	dma-channel@40400000 {
+		compatible = "xlnx,axi-dma-mm2s-channel";
+		interrupts = < 0 59 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+	dma-channel@40400030 {
+		compatible = "xlnx,axi-dma-s2mm-channel";
+		interrupts = < 0 58 4 >;
+		xlnx,datawidth = <0x40>;
+	} ;
+} ;
+
+
+* DMA client
+
+Required properties:
+- dmas: a list of <[DMA device phandle] [Channel ID]> pairs,
+	where Channel ID is '0' for write/tx and '1' for read/rx
+	channel.
+- dma-names: a list of DMA channel names, one per "dmas" entry
+
+Example:
+++++++++
+
+dmatest_0: dmatest@0 {
+	compatible ="xlnx,axi-dma-test-1.00.a";
+	dmas = <&axi_dma_0 0
+		&axi_dma_0 1>;
+	dma-names = "dma0", "dma1";
+} ;

Documentation/dmaengine.txt

@@ -98,7 +98,7 @@ The slave DMA usage consists of following steps:
 		unsigned long flags);
 
    The peripheral driver is expected to have mapped the scatterlist for
-   the DMA operation prior to calling device_prep_slave_sg, and must
+   the DMA operation prior to calling dmaengine_prep_slave_sg(), and must
    keep the scatterlist mapped until the DMA operation has completed.
    The scatterlist must be mapped using the DMA struct device.
    If a mapping needs to be synchronized later, dma_sync_*_for_*() must be
@@ -195,5 +195,5 @@ Further APIs:
    Note:
 	Not all DMA engine drivers can return reliable information for
 	a running DMA channel.  It is recommended that DMA engine users
-	pause or stop (via dmaengine_terminate_all) the channel before
+	pause or stop (via dmaengine_terminate_all()) the channel before
 	using this API.

MAINTAINERS

@@ -8062,7 +8062,7 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
 M:	Viresh Kumar <viresh.linux@gmail.com>
 M:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 S:	Maintained
-F:	include/linux/dw_dmac.h
+F:	include/linux/platform_data/dma-dw.h
 F:	drivers/dma/dw/
 
 SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER

arch/avr32/mach-at32ap/at32ap700x.c

@@ -7,7 +7,7 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/dw_dmac.h>
+#include <linux/platform_data/dma-dw.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -1356,10 +1356,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 		goto fail;
 
 	slave->sdata.dma_dev = &dw_dmac0_device.dev;
-	slave->sdata.cfg_hi = (DWC_CFGH_SRC_PER(0)
-				| DWC_CFGH_DST_PER(1));
-	slave->sdata.cfg_lo &= ~(DWC_CFGL_HS_DST_POL
-				| DWC_CFGL_HS_SRC_POL);
+	slave->sdata.src_id = 0;
+	slave->sdata.dst_id = 1;
+	slave->sdata.src_master = 1;
+	slave->sdata.dst_master = 0;
 
 	data->dma_slave = slave;
 
@@ -2052,8 +2052,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
 	/* Check if DMA slave interface for capture should be configured. */
 	if (flags & AC97C_CAPTURE) {
 		rx_dws->dma_dev = &dw_dmac0_device.dev;
-		rx_dws->cfg_hi = DWC_CFGH_SRC_PER(3);
-		rx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		rx_dws->src_id = 3;
 		rx_dws->src_master = 0;
 		rx_dws->dst_master = 1;
 	}
@@ -2061,8 +2060,7 @@ at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data,
 	/* Check if DMA slave interface for playback should be configured. */
 	if (flags & AC97C_PLAYBACK) {
 		tx_dws->dma_dev = &dw_dmac0_device.dev;
-		tx_dws->cfg_hi = DWC_CFGH_DST_PER(4);
-		tx_dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+		tx_dws->dst_id = 4;
 		tx_dws->src_master = 0;
 		tx_dws->dst_master = 1;
 	}
@@ -2134,8 +2132,7 @@ at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data)
 	dws = &data->dws;
 
 	dws->dma_dev = &dw_dmac0_device.dev;
-	dws->cfg_hi = DWC_CFGH_DST_PER(2);
-	dws->cfg_lo &= ~(DWC_CFGL_HS_DST_POL | DWC_CFGL_HS_SRC_POL);
+	dws->dst_id = 2;
 	dws->src_master = 0;
 	dws->dst_master = 1;
 

arch/avr32/mach-at32ap/include/mach/atmel-mci.h

 #ifndef __MACH_ATMEL_MCI_H
 #define __MACH_ATMEL_MCI_H
 
-#include <linux/dw_dmac.h>
+#include <linux/platform_data/dma-dw.h>
 
 /**
  * struct mci_dma_data - DMA data for MCI interface

drivers/ata/pata_arasan_cf.c

@@ -420,7 +420,7 @@ dma_xfer(struct arasan_cf_dev *acdev, dma_addr_t src, dma_addr_t dest, u32 len)
 
 	/* Wait for DMA to complete */
 	if (!wait_for_completion_timeout(&acdev->dma_completion, TIMEOUT)) {
-		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(chan);
 		dev_err(acdev->host->dev, "wait_for_completion_timeout\n");
 		return -ETIMEDOUT;
 	}
@@ -928,8 +928,7 @@ static int arasan_cf_suspend(struct device *dev)
 	struct arasan_cf_dev *acdev = host->ports[0]->private_data;
 
 	if (acdev->dma_chan)
-		acdev->dma_chan->device->device_control(acdev->dma_chan,
-				DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(acdev->dma_chan);
 
 	cf_exit(acdev);
 	return ata_host_suspend(host, PMSG_SUSPEND);

drivers/dma/Kconfig

@@ -270,7 +270,7 @@ config IMX_SDMA
 	select DMA_ENGINE
 	help
 	  Support the i.MX SDMA engine. This engine is integrated into
-	  Freescale i.MX25/31/35/51/53 chips.
+	  Freescale i.MX25/31/35/51/53/6 chips.
 
 config IMX_DMA
 	tristate "i.MX DMA support"

drivers/dma/coh901318.c

@@ -2156,7 +2156,7 @@ coh901318_free_chan_resources(struct dma_chan *chan)
 
 	spin_unlock_irqrestore(&cohc->lock, flags);
 
-	chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+	dmaengine_terminate_all(chan);
 }
 
 

drivers/dma/cppi41.c

@@ -938,7 +938,7 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 	if (!glue_info)
 		return -EINVAL;
 
-	cdd = kzalloc(sizeof(*cdd), GFP_KERNEL);
+	cdd = devm_kzalloc(&pdev->dev, sizeof(*cdd), GFP_KERNEL);
 	if (!cdd)
 		return -ENOMEM;
 
@@ -959,10 +959,8 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 	cdd->qmgr_mem = of_iomap(dev->of_node, 3);
 
 	if (!cdd->usbss_mem || !cdd->ctrl_mem || !cdd->sched_mem ||
-			!cdd->qmgr_mem) {
-		ret = -ENXIO;
-		goto err_remap;
-	}
+			!cdd->qmgr_mem)
+		return -ENXIO;
 
 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
@@ -989,7 +987,7 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 
 	cppi_writel(USBSS_IRQ_PD_COMP, cdd->usbss_mem + USBSS_IRQ_ENABLER);
 
-	ret = request_irq(irq, glue_info->isr, IRQF_SHARED,
+	ret = devm_request_irq(&pdev->dev, irq, glue_info->isr, IRQF_SHARED,
 			dev_name(dev), cdd);
 	if (ret)
 		goto err_irq;
@@ -1009,7 +1007,6 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 err_of:
 	dma_async_device_unregister(&cdd->ddev);
 err_dma_reg:
-	free_irq(irq, cdd);
 err_irq:
 	cppi_writel(0, cdd->usbss_mem + USBSS_IRQ_CLEARR);
 	cleanup_chans(cdd);
@@ -1023,8 +1020,6 @@ static int cppi41_dma_probe(struct platform_device *pdev)
 	iounmap(cdd->ctrl_mem);
 	iounmap(cdd->sched_mem);
 	iounmap(cdd->qmgr_mem);
-err_remap:
-	kfree(cdd);
 	return ret;
 }
 
@@ -1036,7 +1031,7 @@ static int cppi41_dma_remove(struct platform_device *pdev)
 	dma_async_device_unregister(&cdd->ddev);
 
 	cppi_writel(0, cdd->usbss_mem + USBSS_IRQ_CLEARR);
-	free_irq(cdd->irq, cdd);
+	devm_free_irq(&pdev->dev, cdd->irq, cdd);
 	cleanup_chans(cdd);
 	deinit_cppi41(&pdev->dev, cdd);
 	iounmap(cdd->usbss_mem);
@@ -1045,7 +1040,6 @@ static int cppi41_dma_remove(struct platform_device *pdev)
 	iounmap(cdd->qmgr_mem);
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	kfree(cdd);
 	return 0;
 }
 

drivers/dma/dw/core.c

@@ -11,7 +11,6 @@
  */
 
 #include <linux/bitops.h>
-#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
@@ -37,24 +36,6 @@
  * support descriptor writeback.
  */
 
-static inline bool is_request_line_unset(struct dw_dma_chan *dwc)
-{
-	return dwc->request_line == (typeof(dwc->request_line))~0;
-}
-
-static inline void dwc_set_masters(struct dw_dma_chan *dwc)
-{
-	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
-	struct dw_dma_slave *dws = dwc->chan.private;
-	unsigned char mmax = dw->nr_masters - 1;
-
-	if (!is_request_line_unset(dwc))
-		return;
-
-	dwc->src_master = min_t(unsigned char, mmax, dwc_get_sms(dws));
-	dwc->dst_master = min_t(unsigned char, mmax, dwc_get_dms(dws));
-}
-
 #define DWC_DEFAULT_CTLLO(_chan) ({				\
 		struct dw_dma_chan *_dwc = to_dw_dma_chan(_chan);	\
 		struct dma_slave_config	*_sconfig = &_dwc->dma_sconfig;	\
@@ -155,13 +136,11 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
 		 */
 		BUG_ON(!dws->dma_dev || dws->dma_dev != dw->dma.dev);
 
-		cfghi = dws->cfg_hi;
-		cfglo |= dws->cfg_lo & ~DWC_CFGL_CH_PRIOR_MASK;
+		cfghi |= DWC_CFGH_DST_PER(dws->dst_id);
+		cfghi |= DWC_CFGH_SRC_PER(dws->src_id);
 	} else {
-		if (dwc->direction == DMA_MEM_TO_DEV)
-			cfghi = DWC_CFGH_DST_PER(dwc->request_line);
-		else if (dwc->direction == DMA_DEV_TO_MEM)
-			cfghi = DWC_CFGH_SRC_PER(dwc->request_line);
+		cfghi |= DWC_CFGH_DST_PER(dwc->dst_id);
+		cfghi |= DWC_CFGH_SRC_PER(dwc->src_id);
 	}
 
 	channel_writel(dwc, CFG_LO, cfglo);
@@ -939,6 +918,26 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	return NULL;
 }
 
+bool dw_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
+	struct dw_dma_slave *dws = param;
+
+	if (!dws || dws->dma_dev != chan->device->dev)
+		return false;
+
+	/* We have to copy data since dws can be temporary storage */
+
+	dwc->src_id = dws->src_id;
+	dwc->dst_id = dws->dst_id;
+
+	dwc->src_master = dws->src_master;
+	dwc->dst_master = dws->dst_master;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(dw_dma_filter);
+
 /*
  * Fix sconfig's burst size according to dw_dmac. We need to convert them as:
  * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
@@ -967,10 +966,6 @@ set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
 	memcpy(&dwc->dma_sconfig, sconfig, sizeof(*sconfig));
 	dwc->direction = sconfig->direction;
 
-	/* Take the request line from slave_id member */
-	if (is_request_line_unset(dwc))
-		dwc->request_line = sconfig->slave_id;
-
 	convert_burst(&dwc->dma_sconfig.src_maxburst);
 	convert_burst(&dwc->dma_sconfig.dst_maxburst);
 
@@ -1099,6 +1094,31 @@ static void dwc_issue_pending(struct dma_chan *chan)
 	spin_unlock_irqrestore(&dwc->lock, flags);
 }
 
+/*----------------------------------------------------------------------*/
+
+static void dw_dma_off(struct dw_dma *dw)
+{
+	int i;
+
+	dma_writel(dw, CFG, 0);
+
+	channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask);
+	channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
+
+	while (dma_readl(dw, CFG) & DW_CFG_DMA_EN)
+		cpu_relax();
+
+	for (i = 0; i < dw->dma.chancnt; i++)
+		dw->chan[i].initialized = false;
+}
+
+static void dw_dma_on(struct dw_dma *dw)
+{
+	dma_writel(dw, CFG, DW_CFG_DMA_EN);
+}
+
 static int dwc_alloc_chan_resources(struct dma_chan *chan)
 {
 	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
@@ -1123,7 +1143,10 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan)
 	 * doesn't mean what you think it means), and status writeback.
 	 */
 
-	dwc_set_masters(dwc);
+	/* Enable controller here if needed */
+	if (!dw->in_use)
+		dw_dma_on(dw);
+	dw->in_use |= dwc->mask;
 
 	spin_lock_irqsave(&dwc->lock, flags);
 	i = dwc->descs_allocated;
@@ -1182,7 +1205,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 	list_splice_init(&dwc->free_list, &list);
 	dwc->descs_allocated = 0;
 	dwc->initialized = false;
-	dwc->request_line = ~0;
 
 	/* Disable interrupts */
 	channel_clear_bit(dw, MASK.XFER, dwc->mask);
@@ -1190,6 +1212,11 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
+	/* Disable controller in case it was a last user */
+	dw->in_use &= ~dwc->mask;
+	if (!dw->in_use)
+		dw_dma_off(dw);
+
 	list_for_each_entry_safe(desc, _desc, &list, desc_node) {
 		dev_vdbg(chan2dev(chan), "  freeing descriptor %p\n", desc);
 		dma_pool_free(dw->desc_pool, desc, desc->txd.phys);
@@ -1460,24 +1487,6 @@ EXPORT_SYMBOL(dw_dma_cyclic_free);
 
 /*----------------------------------------------------------------------*/
 
-static void dw_dma_off(struct dw_dma *dw)
-{
-	int i;
-
-	dma_writel(dw, CFG, 0);
-
-	channel_clear_bit(dw, MASK.XFER, dw->all_chan_mask);
-	channel_clear_bit(dw, MASK.SRC_TRAN, dw->all_chan_mask);
-	channel_clear_bit(dw, MASK.DST_TRAN, dw->all_chan_mask);
-	channel_clear_bit(dw, MASK.ERROR, dw->all_chan_mask);
-
-	while (dma_readl(dw, CFG) & DW_CFG_DMA_EN)
-		cpu_relax();
-
-	for (i = 0; i < dw->dma.chancnt; i++)
-		dw->chan[i].initialized = false;
-}
-
 int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
 {
 	struct dw_dma		*dw;
@@ -1495,13 +1504,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
 	dw->regs = chip->regs;
 	chip->dw = dw;
 
-	dw->clk = devm_clk_get(chip->dev, "hclk");
-	if (IS_ERR(dw->clk))
-		return PTR_ERR(dw->clk);
-	err = clk_prepare_enable(dw->clk);
-	if (err)
-		return err;
-
 	dw_params = dma_read_byaddr(chip->regs, DW_PARAMS);
 	autocfg = dw_params >> DW_PARAMS_EN & 0x1;
 
@@ -1604,7 +1606,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
 		channel_clear_bit(dw, CH_EN, dwc->mask);
 
 		dwc->direction = DMA_TRANS_NONE;
-		dwc->request_line = ~0;
 
 		/* Hardware configuration */
 		if (autocfg) {
@@ -1659,8 +1660,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
 	dw->dma.device_tx_status = dwc_tx_status;
 	dw->dma.device_issue_pending = dwc_issue_pending;
 
-	dma_writel(dw, CFG, DW_CFG_DMA_EN);
-
 	err = dma_async_device_register(&dw->dma);
 	if (err)
 		goto err_dma_register;
@@ -1673,7 +1672,6 @@ int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata)
 err_dma_register:
 	free_irq(chip->irq, dw);
 err_pdata:
-	clk_disable_unprepare(dw->clk);
 	return err;
 }
 EXPORT_SYMBOL_GPL(dw_dma_probe);
@@ -1695,46 +1693,27 @@ int dw_dma_remove(struct dw_dma_chip *chip)
 		channel_clear_bit(dw, CH_EN, dwc->mask);
 	}
 
-	clk_disable_unprepare(dw->clk);
-
 	return 0;
 }
 EXPORT_SYMBOL_GPL(dw_dma_remove);
 
-void dw_dma_shutdown(struct dw_dma_chip *chip)
-{
-	struct dw_dma *dw = chip->dw;
-
-	dw_dma_off(dw);
-	clk_disable_unprepare(dw->clk);
-}
-EXPORT_SYMBOL_GPL(dw_dma_shutdown);
-
-#ifdef CONFIG_PM_SLEEP
-
-int dw_dma_suspend(struct dw_dma_chip *chip)
+int dw_dma_disable(struct dw_dma_chip *chip)
 {
 	struct dw_dma *dw = chip->dw;
 
 	dw_dma_off(dw);
-	clk_disable_unprepare(dw->clk);
-
 	return 0;
 }
-EXPORT_SYMBOL_GPL(dw_dma_suspend);
+EXPORT_SYMBOL_GPL(dw_dma_disable);
 
-int dw_dma_resume(struct dw_dma_chip *chip)
+int dw_dma_enable(struct dw_dma_chip *chip)
 {
 	struct dw_dma *dw = chip->dw;
 
-	clk_prepare_enable(dw->clk);
-	dma_writel(dw, CFG, DW_CFG_DMA_EN);
-
+	dw_dma_on(dw);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(dw_dma_resume);
-
-#endif /* CONFIG_PM_SLEEP */
+EXPORT_SYMBOL_GPL(dw_dma_enable);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller core driver");

drivers/dma/dw/internal.h

@@ -8,63 +8,16 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef _DW_DMAC_INTERNAL_H
-#define _DW_DMAC_INTERNAL_H
+#ifndef _DMA_DW_INTERNAL_H
+#define _DMA_DW_INTERNAL_H
 
-#include <linux/device.h>
-#include <linux/dw_dmac.h>
+#include <linux/dma/dw.h>
 
 #include "regs.h"
 
-/**
- * struct dw_dma_chip - representation of DesignWare DMA controller hardware
- * @dev:		struct device of the DMA controller
- * @irq:		irq line
- * @regs:		memory mapped I/O space
- * @dw:			struct dw_dma that is filed by dw_dma_probe()
- */
-struct dw_dma_chip {
-	struct device	*dev;
-	int		irq;
-	void __iomem	*regs;
-	struct dw_dma	*dw;
-};
-
-/* Export to the platform drivers */
-int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata);
-int dw_dma_remove(struct dw_dma_chip *chip);
-
-void dw_dma_shutdown(struct dw_dma_chip *chip);
-
-#ifdef CONFIG_PM_SLEEP
-
-int dw_dma_suspend(struct dw_dma_chip *chip);
-int dw_dma_resume(struct dw_dma_chip *chip);
-
-#endif /* CONFIG_PM_SLEEP */
+int dw_dma_disable(struct dw_dma_chip *chip);
+int dw_dma_enable(struct dw_dma_chip *chip);
 
-/**
- * dwc_get_dms - get destination master
- * @slave:	pointer to the custom slave configuration
- *
- * Returns destination master in the custom slave configuration if defined, or
- * default value otherwise.
- */
-static inline unsigned int dwc_get_dms(struct dw_dma_slave *slave)
-{
-	return slave ? slave->dst_master : 0;
-}
-
-/**
- * dwc_get_sms - get source master
- * @slave:	pointer to the custom slave configuration
- *
- * Returns source master in the custom slave configuration if defined, or
- * default value otherwise.
- */
-static inline unsigned int dwc_get_sms(struct dw_dma_slave *slave)
-{
-	return slave ? slave->src_master : 1;
-}
+extern bool dw_dma_filter(struct dma_chan *chan, void *param);
 
-#endif /* _DW_DMAC_INTERNAL_H */
+#endif /* _DMA_DW_INTERNAL_H */

drivers/dma/dw/pci.c

@@ -82,7 +82,7 @@ static int dw_pci_suspend_late(struct device *dev)
 	struct pci_dev *pci = to_pci_dev(dev);
 	struct dw_dma_chip *chip = pci_get_drvdata(pci);
 
-	return dw_dma_suspend(chip);
+	return dw_dma_disable(chip);
 };
 
 static int dw_pci_resume_early(struct device *dev)
@@ -90,7 +90,7 @@ static int dw_pci_resume_early(struct device *dev)
 	struct pci_dev *pci = to_pci_dev(dev);
 	struct dw_dma_chip *chip = pci_get_drvdata(pci);
 
-	return dw_dma_resume(chip);
+	return dw_dma_enable(chip);
 };
 
 #endif /* CONFIG_PM_SLEEP */
@@ -108,6 +108,10 @@ static const struct pci_device_id dw_pci_id_table[] = {
 	{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
 	{ PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata },
 
+	/* Braswell */
+	{ PCI_VDEVICE(INTEL, 0x2286), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x22c0), (kernel_ulong_t)&dw_pci_pdata },
+
 	/* Haswell */
 	{ PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_pci_pdata },
 	{ }

drivers/dma/dw/platform.c

@@ -25,72 +25,49 @@
 
 #include "internal.h"
 
-struct dw_dma_of_filter_args {
-	struct dw_dma *dw;
-	unsigned int req;
-	unsigned int src;
-	unsigned int dst;
-};
-
-static bool dw_dma_of_filter(struct dma_chan *chan, void *param)
-{
-	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-	struct dw_dma_of_filter_args *fargs = param;
-
-	/* Ensure the device matches our channel */
-	if (chan->device != &fargs->dw->dma)
-		return false;
-
-	dwc->request_line = fargs->req;
-	dwc->src_master	= fargs->src;
-	dwc->dst_master	= fargs->dst;
-
-	return true;
-}
-
 static struct dma_chan *dw_dma_of_xlate(struct of_phandle_args *dma_spec,
 					struct of_dma *ofdma)
 {
 	struct dw_dma *dw = ofdma->of_dma_data;
-	struct dw_dma_of_filter_args fargs = {
-		.dw = dw,
+	struct dw_dma_slave slave = {
+		.dma_dev = dw->dma.dev,
 	};
 	dma_cap_mask_t cap;
 
 	if (dma_spec->args_count != 3)
 		return NULL;
 
-	fargs.req = dma_spec->args[0];
-	fargs.src = dma_spec->args[1];
-	fargs.dst = dma_spec->args[2];
+	slave.src_id = dma_spec->args[0];
+	slave.dst_id = dma_spec->args[0];
+	slave.src_master = dma_spec->args[1];
+	slave.dst_master = dma_spec->args[2];
 
-	if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
-		    fargs.src >= dw->nr_masters ||
-		    fargs.dst >= dw->nr_masters))
+	if (WARN_ON(slave.src_id >= DW_DMA_MAX_NR_REQUESTS ||
+		    slave.dst_id >= DW_DMA_MAX_NR_REQUESTS ||
+		    slave.src_master >= dw->nr_masters ||
+		    slave.dst_master >= dw->nr_masters))
 		return NULL;
 
 	dma_cap_zero(cap);
 	dma_cap_set(DMA_SLAVE, cap);
 
 	/* TODO: there should be a simpler way to do this */
-	return dma_request_channel(cap, dw_dma_of_filter, &fargs);
+	return dma_request_channel(cap, dw_dma_filter, &slave);
 }
 
 #ifdef CONFIG_ACPI
 static bool dw_dma_acpi_filter(struct dma_chan *chan, void *param)
 {
-	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
 	struct acpi_dma_spec *dma_spec = param;
+	struct dw_dma_slave slave = {
+		.dma_dev = dma_spec->dev,
+		.src_id = dma_spec->slave_id,
+		.dst_id = dma_spec->slave_id,
+		.src_master = 1,
+		.dst_master = 0,
+	};
 
-	if (chan->device->dev != dma_spec->dev ||
-	    chan->chan_id != dma_spec->chan_id)
-		return false;
-
-	dwc->request_line = dma_spec->slave_id;
-	dwc->src_master = dwc_get_sms(NULL);
-	dwc->dst_master = dwc_get_dms(NULL);
-
-	return true;
+	return dw_dma_filter(chan, &slave);
 }
 
 static void dw_dma_acpi_controller_register(struct dw_dma *dw)
@@ -201,10 +178,17 @@ static int dw_probe(struct platform_device *pdev)
 
 	chip->dev = dev;
 
-	err = dw_dma_probe(chip, pdata);
+	chip->clk = devm_clk_get(chip->dev, "hclk");
+	if (IS_ERR(chip->clk))
+		return PTR_ERR(chip->clk);
+	err = clk_prepare_enable(chip->clk);
 	if (err)
 		return err;
 
+	err = dw_dma_probe(chip, pdata);
+	if (err)
+		goto err_dw_dma_probe;
+
 	platform_set_drvdata(pdev, chip);
 
 	if (pdev->dev.of_node) {
@@ -219,6 +203,10 @@ static int dw_probe(struct platform_device *pdev)
 		dw_dma_acpi_controller_register(chip->dw);
 
 	return 0;
+
+err_dw_dma_probe:
+	clk_disable_unprepare(chip->clk);
+	return err;
 }
 
 static int dw_remove(struct platform_device *pdev)
@@ -228,14 +216,18 @@ static int dw_remove(struct platform_device *pdev)
 	if (pdev->dev.of_node)
 		of_dma_controller_free(pdev->dev.of_node);
 
-	return dw_dma_remove(chip);
+	dw_dma_remove(chip);
+	clk_disable_unprepare(chip->clk);
+
+	return 0;
 }
 
 static void dw_shutdown(struct platform_device *pdev)
 {
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
-	dw_dma_shutdown(chip);
+	dw_dma_disable(chip);
+	clk_disable_unprepare(chip->clk);
 }
 
 #ifdef CONFIG_OF
@@ -261,7 +253,10 @@ static int dw_suspend_late(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
-	return dw_dma_suspend(chip);
+	dw_dma_disable(chip);
+	clk_disable_unprepare(chip->clk);
+
+	return 0;
 }
 
 static int dw_resume_early(struct device *dev)
@@ -269,7 +264,8 @@ static int dw_resume_early(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_dma_chip *chip = platform_get_drvdata(pdev);
 
-	return dw_dma_resume(chip);
+	clk_prepare_enable(chip->clk);
+	return dw_dma_enable(chip);
 }
 
 #endif /* CONFIG_PM_SLEEP */
@@ -281,7 +277,7 @@ static const struct dev_pm_ops dw_dev_pm_ops = {
 static struct platform_driver dw_driver = {
 	.probe		= dw_probe,
 	.remove		= dw_remove,
-	.shutdown	= dw_shutdown,
+	.shutdown       = dw_shutdown,
 	.driver = {
 		.name	= "dw_dmac",
 		.pm	= &dw_dev_pm_ops,

drivers/dma/dw/regs.h

@@ -11,7 +11,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/dmaengine.h>
-#include <linux/dw_dmac.h>
 
 #define DW_DMA_MAX_NR_CHANNELS	8
 #define DW_DMA_MAX_NR_REQUESTS	16
@@ -132,6 +131,18 @@ struct dw_dma_regs {
 /* Bitfields in DWC_PARAMS */
 #define DWC_PARAMS_MBLK_EN	11		/* multi block transfer */
 
+/* bursts size */
+enum dw_dma_msize {
+	DW_DMA_MSIZE_1,
+	DW_DMA_MSIZE_4,
+	DW_DMA_MSIZE_8,
+	DW_DMA_MSIZE_16,
+	DW_DMA_MSIZE_32,
+	DW_DMA_MSIZE_64,
+	DW_DMA_MSIZE_128,
+	DW_DMA_MSIZE_256,
+};
+
 /* Bitfields in CTL_LO */
 #define DWC_CTLL_INT_EN		(1 << 0)	/* irqs enabled? */
 #define DWC_CTLL_DST_WIDTH(n)	((n)<<1)	/* bytes per element */
@@ -161,20 +172,35 @@ struct dw_dma_regs {
 #define DWC_CTLH_DONE		0x00001000
 #define DWC_CTLH_BLOCK_TS_MASK	0x00000fff
 
-/* Bitfields in CFG_LO. Platform-configurable bits are in <linux/dw_dmac.h> */
+/* Bitfields in CFG_LO */
 #define DWC_CFGL_CH_PRIOR_MASK	(0x7 << 5)	/* priority mask */
 #define DWC_CFGL_CH_PRIOR(x)	((x) << 5)	/* priority */
 #define DWC_CFGL_CH_SUSP	(1 << 8)	/* pause xfer */
 #define DWC_CFGL_FIFO_EMPTY	(1 << 9)	/* pause xfer */
 #define DWC_CFGL_HS_DST		(1 << 10)	/* handshake w/dst */
 #define DWC_CFGL_HS_SRC		(1 << 11)	/* handshake w/src */
+#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
+#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
+#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
+#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
+#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
+#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
+#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
+#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
+#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
+#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
 #define DWC_CFGL_MAX_BURST(x)	((x) << 20)
 #define DWC_CFGL_RELOAD_SAR	(1 << 30)
 #define DWC_CFGL_RELOAD_DAR	(1 << 31)
 
-/* Bitfields in CFG_HI. Platform-configurable bits are in <linux/dw_dmac.h> */
+/* Bitfields in CFG_HI */
+#define DWC_CFGH_FCMODE		(1 << 0)
+#define DWC_CFGH_FIFO_MODE	(1 << 1)
+#define DWC_CFGH_PROTCTL(x)	((x) << 2)
 #define DWC_CFGH_DS_UPD_EN	(1 << 5)
 #define DWC_CFGH_SS_UPD_EN	(1 << 6)
+#define DWC_CFGH_SRC_PER(x)	((x) << 7)
+#define DWC_CFGH_DST_PER(x)	((x) << 11)
 
 /* Bitfields in SGR */
 #define DWC_SGR_SGI(x)		((x) << 0)
@@ -221,9 +247,10 @@ struct dw_dma_chan {
 	bool			nollp;
 
 	/* custom slave configuration */
-	unsigned int		request_line;
-	unsigned char		src_master;
-	unsigned char		dst_master;
+	u8			src_id;
+	u8			dst_id;
+	u8			src_master;
+	u8			dst_master;
 
 	/* configuration passed via DMA_SLAVE_CONFIG */
 	struct dma_slave_config dma_sconfig;
@@ -250,11 +277,11 @@ struct dw_dma {
 	void __iomem		*regs;
 	struct dma_pool		*desc_pool;
 	struct tasklet_struct	tasklet;
-	struct clk		*clk;
 
 	/* channels */
 	struct dw_dma_chan	*chan;
 	u8			all_chan_mask;
+	u8			in_use;
 
 	/* hardware configuration */
 	unsigned char		nr_masters;

drivers/dma/edma.c

@@ -288,7 +288,7 @@ static int edma_slave_config(struct edma_chan *echan,
 static int edma_dma_pause(struct edma_chan *echan)
 {
 	/* Pause/Resume only allowed with cyclic mode */
-	if (!echan->edesc->cyclic)
+	if (!echan->edesc || !echan->edesc->cyclic)
 		return -EINVAL;
 
 	edma_pause(echan->ch_num);

drivers/dma/fsldma.c

@@ -36,7 +36,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-
+#include <linux/fsldma.h>
 #include "dmaengine.h"
 #include "fsldma.h"
 
@@ -367,6 +367,20 @@ static void fsl_chan_toggle_ext_start(struct fsldma_chan *chan, int enable)
 		chan->feature &= ~FSL_DMA_CHAN_START_EXT;
 }
 
+int fsl_dma_external_start(struct dma_chan *dchan, int enable)
+{
+	struct fsldma_chan *chan;
+
+	if (!dchan)
+		return -EINVAL;
+
+	chan = to_fsl_chan(dchan);
+
+	fsl_chan_toggle_ext_start(chan, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fsl_dma_external_start);
+
 static void append_ld_queue(struct fsldma_chan *chan, struct fsl_desc_sw *desc)
 {
 	struct fsl_desc_sw *tail = to_fsl_desc(chan->ld_pending.prev);
@@ -998,15 +1012,6 @@ static int fsl_dma_device_control(struct dma_chan *dchan,
 		chan->set_request_count(chan, size);
 		return 0;
 
-	case FSLDMA_EXTERNAL_START:
-
-		/* make sure the channel supports external start */
-		if (!chan->toggle_ext_start)
-			return -ENXIO;
-
-		chan->toggle_ext_start(chan, arg);
-		return 0;
-
 	default:
 		return -ENXIO;
 	}

drivers/dma/imx-sdma.c

@@ -1334,7 +1334,7 @@ static void sdma_load_firmware(const struct firmware *fw, void *context)
 	release_firmware(fw);
 }
 
-static int __init sdma_get_firmware(struct sdma_engine *sdma,
+static int sdma_get_firmware(struct sdma_engine *sdma,
 		const char *fw_name)
 {
 	int ret;
@@ -1448,7 +1448,7 @@ static struct dma_chan *sdma_xlate(struct of_phandle_args *dma_spec,
 	return dma_request_channel(mask, sdma_filter_fn, &data);
 }
 
-static int __init sdma_probe(struct platform_device *pdev)
+static int sdma_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id =
 			of_match_device(sdma_dt_ids, &pdev->dev);
@@ -1603,6 +1603,8 @@ static int __init sdma_probe(struct platform_device *pdev)
 	sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
 	dma_set_max_seg_size(sdma->dma_device.dev, 65535);
 
+	platform_set_drvdata(pdev, sdma);
+
 	ret = dma_async_device_register(&sdma->dma_device);
 	if (ret) {
 		dev_err(&pdev->dev, "unable to register\n");
@@ -1640,7 +1642,27 @@ static int __init sdma_probe(struct platform_device *pdev)
 
 static int sdma_remove(struct platform_device *pdev)
 {
-	return -EBUSY;
+	struct sdma_engine *sdma = platform_get_drvdata(pdev);
+	struct resource *iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int irq = platform_get_irq(pdev, 0);
+	int i;
+
+	dma_async_device_unregister(&sdma->dma_device);
+	kfree(sdma->script_addrs);
+	free_irq(irq, sdma);
+	iounmap(sdma->regs);
+	release_mem_region(iores->start, resource_size(iores));
+	/* Kill the tasklet */
+	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+		struct sdma_channel *sdmac = &sdma->channel[i];
+
+		tasklet_kill(&sdmac->tasklet);
+	}
+	kfree(sdma);
+
+	platform_set_drvdata(pdev, NULL);
+	dev_info(&pdev->dev, "Removed...\n");
+	return 0;
 }
 
 static struct platform_driver sdma_driver = {
@@ -1650,13 +1672,10 @@ static struct platform_driver sdma_driver = {
 	},
 	.id_table	= sdma_devtypes,
 	.remove		= sdma_remove,
+	.probe		= sdma_probe,
 };
 
-static int __init sdma_module_init(void)
-{
-	return platform_driver_probe(&sdma_driver, sdma_probe);
-}
-module_init(sdma_module_init);
+module_platform_driver(sdma_driver);
 
 MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
 MODULE_DESCRIPTION("i.MX SDMA driver");

drivers/dma/mmp_tdma.c

@@ -148,10 +148,16 @@ static void mmp_tdma_chan_set_desc(struct mmp_tdma_chan *tdmac, dma_addr_t phys)
 					tdmac->reg_base + TDCR);
 }
 
+static void mmp_tdma_enable_irq(struct mmp_tdma_chan *tdmac, bool enable)
+{
+	if (enable)
+		writel(TDIMR_COMP, tdmac->reg_base + TDIMR);
+	else
+		writel(0, tdmac->reg_base + TDIMR);
+}
+
 static void mmp_tdma_enable_chan(struct mmp_tdma_chan *tdmac)
 {
-	/* enable irq */
-	writel(TDIMR_COMP, tdmac->reg_base + TDIMR);
 	/* enable dma chan */
 	writel(readl(tdmac->reg_base + TDCR) | TDCR_CHANEN,
 					tdmac->reg_base + TDCR);
@@ -163,9 +169,6 @@ static void mmp_tdma_disable_chan(struct mmp_tdma_chan *tdmac)
 	writel(readl(tdmac->reg_base + TDCR) & ~TDCR_CHANEN,
 					tdmac->reg_base + TDCR);
 
-	/* disable irq */
-	writel(0, tdmac->reg_base + TDIMR);
-
 	tdmac->status = DMA_COMPLETE;
 }
 
@@ -434,6 +437,10 @@ static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 		i++;
 	}
 
+	/* enable interrupt */
+	if (flags & DMA_PREP_INTERRUPT)
+		mmp_tdma_enable_irq(tdmac, true);
+
 	tdmac->buf_len = buf_len;
 	tdmac->period_len = period_len;
 	tdmac->pos = 0;
@@ -455,6 +462,8 @@ static int mmp_tdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 	switch (cmd) {
 	case DMA_TERMINATE_ALL:
 		mmp_tdma_disable_chan(tdmac);
+		/* disable interrupt */
+		mmp_tdma_enable_irq(tdmac, false);
 		break;
 	case DMA_PAUSE:
 		mmp_tdma_pause_chan(tdmac);

drivers/dma/mv_xor.h

@@ -23,17 +23,22 @@
 #include <linux/dmaengine.h>
 #include <linux/interrupt.h>
 
-#define USE_TIMER
 #define MV_XOR_POOL_SIZE		PAGE_SIZE
 #define MV_XOR_SLOT_SIZE		64
 #define MV_XOR_THRESHOLD		1
 #define MV_XOR_MAX_CHANNELS             2
 
+#define MV_XOR_MIN_BYTE_COUNT		SZ_128
+#define MV_XOR_MAX_BYTE_COUNT		(SZ_16M - 1)
+
 /* Values for the XOR_CONFIG register */
 #define XOR_OPERATION_MODE_XOR		0
 #define XOR_OPERATION_MODE_MEMCPY	2
 #define XOR_DESCRIPTOR_SWAP		BIT(14)
 
+#define XOR_DESC_DMA_OWNED		BIT(31)
+#define XOR_DESC_EOD_INT_EN		BIT(31)
+
 #define XOR_CURR_DESC(chan)	(chan->mmr_high_base + 0x10 + (chan->idx * 4))
 #define XOR_NEXT_DESC(chan)	(chan->mmr_high_base + 0x00 + (chan->idx * 4))
 #define XOR_BYTE_COUNT(chan)	(chan->mmr_high_base + 0x20 + (chan->idx * 4))
@@ -48,7 +53,24 @@
 #define XOR_INTR_MASK(chan)	(chan->mmr_base + 0x40)
 #define XOR_ERROR_CAUSE(chan)	(chan->mmr_base + 0x50)
 #define XOR_ERROR_ADDR(chan)	(chan->mmr_base + 0x60)
-#define XOR_INTR_MASK_VALUE	0x3F5
+
+#define XOR_INT_END_OF_DESC	BIT(0)
+#define XOR_INT_END_OF_CHAIN	BIT(1)
+#define XOR_INT_STOPPED		BIT(2)
+#define XOR_INT_PAUSED		BIT(3)
+#define XOR_INT_ERR_DECODE	BIT(4)
+#define XOR_INT_ERR_RDPROT	BIT(5)
+#define XOR_INT_ERR_WRPROT	BIT(6)
+#define XOR_INT_ERR_OWN		BIT(7)
+#define XOR_INT_ERR_PAR		BIT(8)
+#define XOR_INT_ERR_MBUS	BIT(9)
+
+#define XOR_INTR_ERRORS		(XOR_INT_ERR_DECODE | XOR_INT_ERR_RDPROT | \
+				 XOR_INT_ERR_WRPROT | XOR_INT_ERR_OWN    | \
+				 XOR_INT_ERR_PAR    | XOR_INT_ERR_MBUS)
+
+#define XOR_INTR_MASK_VALUE	(XOR_INT_END_OF_DESC | XOR_INT_END_OF_CHAIN | \
+				 XOR_INT_STOPPED     | XOR_INTR_ERRORS)
 
 #define WINDOW_BASE(w)		(0x50 + ((w) << 2))
 #define WINDOW_SIZE(w)		(0x70 + ((w) << 2))
@@ -97,10 +119,9 @@ struct mv_xor_chan {
 	struct list_head	all_slots;
 	int			slots_allocated;
 	struct tasklet_struct	irq_tasklet;
-#ifdef USE_TIMER
-	unsigned long		cleanup_time;
-	u32			current_on_last_cleanup;
-#endif
+	char			dummy_src[MV_XOR_MIN_BYTE_COUNT];
+	char			dummy_dst[MV_XOR_MIN_BYTE_COUNT];
+	dma_addr_t		dummy_src_addr, dummy_dst_addr;
 };
 
 /**
@@ -110,16 +131,10 @@ struct mv_xor_chan {
  * @completed_node: node on the mv_xor_chan.completed_slots list
  * @hw_desc: virtual address of the hardware descriptor chain
  * @phys: hardware address of the hardware descriptor chain
- * @group_head: first operation in a transaction
- * @slot_cnt: total slots used in an transaction (group of operations)
- * @slots_per_op: number of slots per operation
+ * @slot_used: slot in use or not
  * @idx: pool index
- * @unmap_src_cnt: number of xor sources
- * @unmap_len: transaction bytecount
  * @tx_list: list of slots that make up a multi-descriptor transaction
  * @async_tx: support for the async_tx api
- * @xor_check_result: result of zero sum
- * @crc32_result: result crc calculation
  */
 struct mv_xor_desc_slot {
 	struct list_head	slot_node;
@@ -127,23 +142,9 @@ struct mv_xor_desc_slot {
 	struct list_head	completed_node;
 	enum dma_transaction_type	type;
 	void			*hw_desc;
-	struct mv_xor_desc_slot	*group_head;
-	u16			slot_cnt;
-	u16			slots_per_op;
+	u16			slot_used;
 	u16			idx;
-	u16			unmap_src_cnt;
-	u32			value;
-	size_t			unmap_len;
-	struct list_head	tx_list;
 	struct dma_async_tx_descriptor	async_tx;
-	union {
-		u32		*xor_check_result;
-		u32		*crc32_result;
-	};
-#ifdef USE_TIMER
-	unsigned long		arrival_time;
-	struct timer_list	timeout;
-#endif
 };
 
 /*
@@ -189,9 +190,4 @@ struct mv_xor_desc {
 #define mv_hw_desc_slot_idx(hw_desc, idx)	\
 	((void *)(((unsigned long)hw_desc) + ((idx) << 5)))
 
-#define MV_XOR_MIN_BYTE_COUNT	(128)
-#define XOR_MAX_BYTE_COUNT	((16 * 1024 * 1024) - 1)
-#define MV_XOR_MAX_BYTE_COUNT	XOR_MAX_BYTE_COUNT
-
-
 #endif

drivers/dma/pl330.c

@@ -1367,17 +1367,10 @@ static int pl330_submit_req(struct pl330_thread *thrd,
 	struct pl330_dmac *pl330 = thrd->dmac;
 	struct _xfer_spec xs;
 	unsigned long flags;
-	void __iomem *regs;
 	unsigned idx;
 	u32 ccr;
 	int ret = 0;
 
-	/* No Req or Unacquired Channel or DMAC */
-	if (!desc || !thrd || thrd->free)
-		return -EINVAL;
-
-	regs = thrd->dmac->base;
-
 	if (pl330->state == DYING
 		|| pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
 		dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
@@ -2755,8 +2748,10 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		list_del(&pch->chan.device_node);
 
 		/* Flush the channel */
-		pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
-		pl330_free_chan_resources(&pch->chan);
+		if (pch->thread) {
+			pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+			pl330_free_chan_resources(&pch->chan);
+		}
 	}
 probe_err2:
 	pl330_del(pl330);
@@ -2782,8 +2777,10 @@ static int pl330_remove(struct amba_device *adev)
 		list_del(&pch->chan.device_node);
 
 		/* Flush the channel */
-		pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
-		pl330_free_chan_resources(&pch->chan);
+		if (pch->thread) {
+			pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+			pl330_free_chan_resources(&pch->chan);
+		}
 	}
 
 	pl330_del(pl330);

drivers/dma/sh/rcar-audmapp.c

@@ -117,7 +117,7 @@ static void audmapp_start_xfer(struct shdma_chan *schan,
 	audmapp_write(auchan, chcr,	PDMACHCR);
 }
 
-static void audmapp_get_config(struct audmapp_chan *auchan, int slave_id,
+static int audmapp_get_config(struct audmapp_chan *auchan, int slave_id,
 			      u32 *chcr, dma_addr_t *dst)
 {
 	struct audmapp_device *audev = to_dev(auchan);
@@ -131,20 +131,22 @@ static void audmapp_get_config(struct audmapp_chan *auchan, int slave_id,
 	if (!pdata) { /* DT */
 		*chcr = ((u32)slave_id) << 16;
 		auchan->shdma_chan.slave_id = (slave_id) >> 8;
-		return;
+		return 0;
 	}
 
 	/* non-DT */
 
 	if (slave_id >= AUDMAPP_SLAVE_NUMBER)
-		return;
+		return -ENXIO;
 
 	for (i = 0, cfg = pdata->slave; i < pdata->slave_num; i++, cfg++)
 		if (cfg->slave_id == slave_id) {
 			*chcr	= cfg->chcr;
 			*dst	= cfg->dst;
-			break;
+			return 0;
 		}
+
+	return -ENXIO;
 }
 
 static int audmapp_set_slave(struct shdma_chan *schan, int slave_id,
@@ -153,8 +155,11 @@ static int audmapp_set_slave(struct shdma_chan *schan, int slave_id,
 	struct audmapp_chan *auchan = to_chan(schan);
 	u32 chcr;
 	dma_addr_t dst;
+	int ret;
 
-	audmapp_get_config(auchan, slave_id, &chcr, &dst);
+	ret = audmapp_get_config(auchan, slave_id, &chcr, &dst);
+	if (ret < 0)
+		return ret;
 
 	if (try)
 		return 0;

drivers/dma/sun6i-dma.c

@@ -862,7 +862,6 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 {
 	struct sun6i_dma_dev *sdc;
 	struct resource *res;
-	struct clk *mux, *pll6;
 	int ret, i;
 
 	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
@@ -886,28 +885,6 @@ static int sun6i_dma_probe(struct platform_device *pdev)
 		return PTR_ERR(sdc->clk);
 	}
 
-	mux = clk_get(NULL, "ahb1_mux");
-	if (IS_ERR(mux)) {
-		dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n");
-		return PTR_ERR(mux);
-	}
-
-	pll6 = clk_get(NULL, "pll6");
-	if (IS_ERR(pll6)) {
-		dev_err(&pdev->dev, "Couldn't get PLL6\n");
-		clk_put(mux);
-		return PTR_ERR(pll6);
-	}
-
-	ret = clk_set_parent(mux, pll6);
-	clk_put(pll6);
-	clk_put(mux);
-
-	if (ret) {
-		dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n");
-		return ret;
-	}
-
 	sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
 	if (IS_ERR(sdc->rstc)) {
 		dev_err(&pdev->dev, "No reset controller specified\n");

drivers/dma/xilinx/xilinx_vdma.c

@@ -1365,7 +1365,6 @@ static const struct of_device_id xilinx_vdma_of_ids[] = {
 static struct platform_driver xilinx_vdma_driver = {
 	.driver = {
 		.name = "xilinx-vdma",
-		.owner = THIS_MODULE,
 		.of_match_table = xilinx_vdma_of_ids,
 	},
 	.probe = xilinx_vdma_probe,

drivers/media/platform/soc_camera/mx3_camera.c

@@ -415,10 +415,8 @@ static void mx3_stop_streaming(struct vb2_queue *q)
 	struct mx3_camera_buffer *buf, *tmp;
 	unsigned long flags;
 
-	if (ichan) {
-		struct dma_chan *chan = &ichan->dma_chan;
-		chan->device->device_control(chan, DMA_PAUSE, 0);
-	}
+	if (ichan)
+		dmaengine_pause(&ichan->dma_chan);
 
 	spin_lock_irqsave(&mx3_cam->lock, flags);
 

drivers/misc/carma/carma-fpga-program.c

@@ -16,6 +16,7 @@
 #include <linux/completion.h>
 #include <linux/miscdevice.h>
 #include <linux/dmaengine.h>
+#include <linux/fsldma.h>
 #include <linux/interrupt.h>
 #include <linux/highmem.h>
 #include <linux/kernel.h>
@@ -518,23 +519,22 @@ static noinline int fpga_program_dma(struct fpga_dev *priv)
 	config.direction = DMA_MEM_TO_DEV;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	config.dst_maxburst = fpga_fifo_size(priv->regs) / 2 / 4;
-	ret = chan->device->device_control(chan, DMA_SLAVE_CONFIG,
-					   (unsigned long)&config);
+	ret = dmaengine_slave_config(chan, &config);
 	if (ret) {
 		dev_err(priv->dev, "DMA slave configuration failed\n");
 		goto out_dma_unmap;
 	}
 
-	ret = chan->device->device_control(chan, FSLDMA_EXTERNAL_START, 1);
+	ret = fsl_dma_external_start(chan, 1)
 	if (ret) {
 		dev_err(priv->dev, "DMA external control setup failed\n");
 		goto out_dma_unmap;
 	}
 
 	/* setup and submit the DMA transaction */
-	tx = chan->device->device_prep_dma_sg(chan,
-					      table.sgl, num_pages,
-					      vb->sglist, vb->sglen, 0);
+
+	tx = dmaengine_prep_dma_sg(chan, table.sgl, num_pages,
+			vb->sglist, vb->sglen, 0);
 	if (!tx) {
 		dev_err(priv->dev, "Unable to prep DMA transaction\n");
 		ret = -ENOMEM;

drivers/mtd/nand/fsmc_nand.c

@@ -605,7 +605,7 @@ static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
 	wait_for_completion_timeout(&host->dma_access_complete,
 				msecs_to_jiffies(3000));
 	if (ret <= 0) {
-		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(chan);
 		dev_err(host->dev, "wait_for_completion_timeout\n");
 		if (!ret)
 			ret = -ETIMEDOUT;

drivers/mtd/nand/sh_flctl.c

@@ -395,7 +395,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
 				msecs_to_jiffies(3000));
 
 	if (ret <= 0) {
-		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(chan);
 		dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
 	}
 

drivers/net/ethernet/micrel/ks8842.c

@@ -875,13 +875,11 @@ static void ks8842_stop_dma(struct ks8842_adapter *adapter)
 
 	tx_ctl->adesc = NULL;
 	if (tx_ctl->chan)
-		tx_ctl->chan->device->device_control(tx_ctl->chan,
-			DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(tx_ctl->chan);
 
 	rx_ctl->adesc = NULL;
 	if (rx_ctl->chan)
-		rx_ctl->chan->device->device_control(rx_ctl->chan,
-			DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(rx_ctl->chan);
 
 	if (sg_dma_address(&rx_ctl->sg))
 		dma_unmap_single(adapter->dev, sg_dma_address(&rx_ctl->sg),

drivers/spi/spi-pxa2xx-dma.c

@@ -157,7 +157,6 @@ static struct dma_async_tx_descriptor *
 pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 			   enum dma_transfer_direction dir)
 {
-	struct pxa2xx_spi_master *pdata = drv_data->master_info;
 	struct chip_data *chip = drv_data->cur_chip;
 	enum dma_slave_buswidth width;
 	struct dma_slave_config cfg;
@@ -184,7 +183,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 		cfg.dst_addr = drv_data->ssdr_physical;
 		cfg.dst_addr_width = width;
 		cfg.dst_maxburst = chip->dma_burst_size;
-		cfg.slave_id = pdata->tx_slave_id;
 
 		sgt = &drv_data->tx_sgt;
 		nents = drv_data->tx_nents;
@@ -193,7 +191,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 		cfg.src_addr = drv_data->ssdr_physical;
 		cfg.src_addr_width = width;
 		cfg.src_maxburst = chip->dma_burst_size;
-		cfg.slave_id = pdata->rx_slave_id;
 
 		sgt = &drv_data->rx_sgt;
 		nents = drv_data->rx_nents;
@@ -210,14 +207,6 @@ pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 }
 
-static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param)
-{
-	const struct pxa2xx_spi_master *pdata = param;
-
-	return chan->chan_id == pdata->tx_chan_id ||
-	       chan->chan_id == pdata->rx_chan_id;
-}
-
 bool pxa2xx_spi_dma_is_possible(size_t len)
 {
 	return len <= MAX_DMA_LEN;
@@ -321,12 +310,12 @@ int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 		return -ENOMEM;
 
 	drv_data->tx_chan = dma_request_slave_channel_compat(mask,
-				pxa2xx_spi_dma_filter, pdata, dev, "tx");
+				pdata->dma_filter, pdata->tx_param, dev, "tx");
 	if (!drv_data->tx_chan)
 		return -ENODEV;
 
 	drv_data->rx_chan = dma_request_slave_channel_compat(mask,
-				pxa2xx_spi_dma_filter, pdata, dev, "rx");
+				pdata->dma_filter, pdata->rx_param, dev, "rx");
 	if (!drv_data->rx_chan) {
 		dma_release_channel(drv_data->tx_chan);
 		drv_data->tx_chan = NULL;

drivers/spi/spi-pxa2xx-pci.c

@@ -10,42 +10,87 @@
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 
+#include <linux/dmaengine.h>
+#include <linux/platform_data/dma-dw.h>
+
 enum {
 	PORT_CE4100,
 	PORT_BYT,
+	PORT_BSW0,
+	PORT_BSW1,
+	PORT_BSW2,
 };
 
 struct pxa_spi_info {
 	enum pxa_ssp_type type;
 	int port_id;
 	int num_chipselect;
-	int tx_slave_id;
-	int tx_chan_id;
-	int rx_slave_id;
-	int rx_chan_id;
 	unsigned long max_clk_rate;
+
+	/* DMA channel request parameters */
+	void *tx_param;
+	void *rx_param;
 };
 
+static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
+static struct dw_dma_slave byt_rx_param = { .src_id = 1 };
+
+static struct dw_dma_slave bsw0_tx_param = { .dst_id = 0 };
+static struct dw_dma_slave bsw0_rx_param = { .src_id = 1 };
+static struct dw_dma_slave bsw1_tx_param = { .dst_id = 6 };
+static struct dw_dma_slave bsw1_rx_param = { .src_id = 7 };
+static struct dw_dma_slave bsw2_tx_param = { .dst_id = 8 };
+static struct dw_dma_slave bsw2_rx_param = { .src_id = 9 };
+
+static bool lpss_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct dw_dma_slave *dws = param;
+
+	if (dws->dma_dev != chan->device->dev)
+		return false;
+
+	chan->private = dws;
+	return true;
+}
+
 static struct pxa_spi_info spi_info_configs[] = {
 	[PORT_CE4100] = {
 		.type = PXA25x_SSP,
 		.port_id =  -1,
 		.num_chipselect = -1,
-		.tx_slave_id = -1,
-		.tx_chan_id = -1,
-		.rx_slave_id = -1,
-		.rx_chan_id = -1,
 		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
 		.type = LPSS_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
-		.tx_slave_id = 0,
-		.tx_chan_id = 0,
-		.rx_slave_id = 1,
-		.rx_chan_id = 1,
 		.max_clk_rate = 50000000,
+		.tx_param = &byt_tx_param,
+		.rx_param = &byt_rx_param,
+	},
+	[PORT_BSW0] = {
+		.type = LPSS_SSP,
+		.port_id = 0,
+		.num_chipselect = 1,
+		.max_clk_rate = 50000000,
+		.tx_param = &bsw0_tx_param,
+		.rx_param = &bsw0_rx_param,
+	},
+	[PORT_BSW1] = {
+		.type = LPSS_SSP,
+		.port_id = 1,
+		.num_chipselect = 1,
+		.max_clk_rate = 50000000,
+		.tx_param = &bsw1_tx_param,
+		.rx_param = &bsw1_rx_param,
+	},
+	[PORT_BSW2] = {
+		.type = LPSS_SSP,
+		.port_id = 2,
+		.num_chipselect = 1,
+		.max_clk_rate = 50000000,
+		.tx_param = &bsw2_tx_param,
+		.rx_param = &bsw2_rx_param,
 	},
 };
 
@@ -59,6 +104,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	struct ssp_device *ssp;
 	struct pxa_spi_info *c;
 	char buf[40];
+	struct pci_dev *dma_dev;
 
 	ret = pcim_enable_device(dev);
 	if (ret)
@@ -73,11 +119,29 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
 	spi_pdata.num_chipselect = (c->num_chipselect > 0) ?
 					c->num_chipselect : dev->devfn;
-	spi_pdata.tx_slave_id = c->tx_slave_id;
-	spi_pdata.tx_chan_id = c->tx_chan_id;
-	spi_pdata.rx_slave_id = c->rx_slave_id;
-	spi_pdata.rx_chan_id = c->rx_chan_id;
-	spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0;
+
+	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+
+	if (c->tx_param) {
+		struct dw_dma_slave *slave = c->tx_param;
+
+		slave->dma_dev = &dma_dev->dev;
+		slave->src_master = 1;
+		slave->dst_master = 0;
+	}
+
+	if (c->rx_param) {
+		struct dw_dma_slave *slave = c->rx_param;
+
+		slave->dma_dev = &dma_dev->dev;
+		slave->src_master = 1;
+		slave->dst_master = 0;
+	}
+
+	spi_pdata.dma_filter = lpss_dma_filter;
+	spi_pdata.tx_param = c->tx_param;
+	spi_pdata.rx_param = c->rx_param;
+	spi_pdata.enable_dma = c->rx_param && c->tx_param;
 
 	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
@@ -128,6 +192,9 @@ static void pxa2xx_spi_pci_remove(struct pci_dev *dev)
 static const struct pci_device_id pxa2xx_spi_pci_devices[] = {
 	{ PCI_VDEVICE(INTEL, 0x2e6a), PORT_CE4100 },
 	{ PCI_VDEVICE(INTEL, 0x0f0e), PORT_BYT },
+	{ PCI_VDEVICE(INTEL, 0x228e), PORT_BSW0 },
+	{ PCI_VDEVICE(INTEL, 0x2290), PORT_BSW1 },
+	{ PCI_VDEVICE(INTEL, 0x22ac), PORT_BSW2 },
 	{ },
 };
 MODULE_DEVICE_TABLE(pci, pxa2xx_spi_pci_devices);

drivers/spi/spi-pxa2xx.c

@@ -1062,8 +1062,6 @@ pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 
 	pdata->num_chipselect = 1;
 	pdata->enable_dma = true;
-	pdata->tx_chan_id = -1;
-	pdata->rx_chan_id = -1;
 
 	return pdata;
 }

drivers/tty/serial/8250/8250.h

@@ -16,13 +16,13 @@
 #include <linux/dmaengine.h>
 
 struct uart_8250_dma {
+	/* Filter function */
 	dma_filter_fn		fn;
+
+	/* Parameter to the filter function */
 	void			*rx_param;
 	void			*tx_param;
 
-	int			rx_chan_id;
-	int			tx_chan_id;
-
 	struct dma_slave_config	rxconf;
 	struct dma_slave_config	txconf;
 

drivers/tty/serial/8250/8250_dw.c

@@ -216,10 +216,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
 
 static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
 {
-	struct dw8250_data *data = param;
-
-	return chan->chan_id == data->dma.tx_chan_id ||
-	       chan->chan_id == data->dma.rx_chan_id;
+	return false;
 }
 
 static void dw8250_setup_port(struct uart_8250_port *up)
@@ -399,8 +396,6 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (!IS_ERR(data->rst))
 		reset_control_deassert(data->rst);
 
-	data->dma.rx_chan_id = -1;
-	data->dma.tx_chan_id = -1;
 	data->dma.rx_param = data;
 	data->dma.tx_param = data;
 	data->dma.fn = dw8250_dma_filter;

drivers/tty/serial/8250/8250_pci.c

@@ -25,6 +25,9 @@
 #include <asm/byteorder.h>
 #include <asm/io.h>
 
+#include <linux/dmaengine.h>
+#include <linux/platform_data/dma-dw.h>
+
 #include "8250.h"
 
 /*
@@ -1349,6 +1352,9 @@ ce4100_serial_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_INTEL_BYT_UART1	0x0f0a
 #define PCI_DEVICE_ID_INTEL_BYT_UART2	0x0f0c
 
+#define PCI_DEVICE_ID_INTEL_BSW_UART1	0x228a
+#define PCI_DEVICE_ID_INTEL_BSW_UART2	0x228c
+
 #define BYT_PRV_CLK			0x800
 #define BYT_PRV_CLK_EN			(1 << 0)
 #define BYT_PRV_CLK_M_VAL_SHIFT		1
@@ -1414,7 +1420,13 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios,
 
 static bool byt_dma_filter(struct dma_chan *chan, void *param)
 {
-	return chan->chan_id == *(int *)param;
+	struct dw_dma_slave *dws = param;
+
+	if (dws->dma_dev != chan->device->dev)
+		return false;
+
+	chan->private = dws;
+	return true;
 }
 
 static int
@@ -1422,35 +1434,57 @@ byt_serial_setup(struct serial_private *priv,
 		 const struct pciserial_board *board,
 		 struct uart_8250_port *port, int idx)
 {
+	struct pci_dev *pdev = priv->dev;
+	struct device *dev = port->port.dev;
 	struct uart_8250_dma *dma;
+	struct dw_dma_slave *tx_param, *rx_param;
+	struct pci_dev *dma_dev;
 	int ret;
 
-	dma = devm_kzalloc(port->port.dev, sizeof(*dma), GFP_KERNEL);
+	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
 	if (!dma)
 		return -ENOMEM;
 
-	switch (priv->dev->device) {
+	tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
+	if (!tx_param)
+		return -ENOMEM;
+
+	rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
+	if (!rx_param)
+		return -ENOMEM;
+
+	switch (pdev->device) {
 	case PCI_DEVICE_ID_INTEL_BYT_UART1:
-		dma->rx_chan_id = 3;
-		dma->tx_chan_id = 2;
+	case PCI_DEVICE_ID_INTEL_BSW_UART1:
+		rx_param->src_id = 3;
+		tx_param->dst_id = 2;
 		break;
 	case PCI_DEVICE_ID_INTEL_BYT_UART2:
-		dma->rx_chan_id = 5;
-		dma->tx_chan_id = 4;
+	case PCI_DEVICE_ID_INTEL_BSW_UART2:
+		rx_param->src_id = 5;
+		tx_param->dst_id = 4;
 		break;
 	default:
 		return -EINVAL;
 	}
 
-	dma->rxconf.slave_id = dma->rx_chan_id;
+	rx_param->src_master = 1;
+	rx_param->dst_master = 0;
+
 	dma->rxconf.src_maxburst = 16;
 
-	dma->txconf.slave_id = dma->tx_chan_id;
+	tx_param->src_master = 1;
+	tx_param->dst_master = 0;
+
 	dma->txconf.dst_maxburst = 16;
 
+	dma_dev = pci_get_slot(pdev->bus, PCI_DEVFN(PCI_SLOT(pdev->devfn), 0));
+	rx_param->dma_dev = &dma_dev->dev;
+	tx_param->dma_dev = &dma_dev->dev;
+
 	dma->fn = byt_dma_filter;
-	dma->rx_param = &dma->rx_chan_id;
-	dma->tx_param = &dma->tx_chan_id;
+	dma->rx_param = rx_param;
+	dma->tx_param = tx_param;
 
 	ret = pci_default_setup(priv, board, port, idx);
 	port->port.iotype = UPIO_MEM;
@@ -1893,6 +1927,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_default_setup,
 	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BSW_UART1,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
+	{
+		.vendor		= PCI_VENDOR_ID_INTEL,
+		.device		= PCI_DEVICE_ID_INTEL_BSW_UART2,
+		.subvendor	= PCI_ANY_ID,
+		.subdevice	= PCI_ANY_ID,
+		.setup		= byt_serial_setup,
+	},
 	/*
 	 * ITE
 	 */
@@ -5192,6 +5240,14 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID,  PCI_ANY_ID,
 		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
 		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART1,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
+	{	PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW_UART2,
+		PCI_ANY_ID,  PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+		pbn_byt },
 
 	/*
 	 * Intel Quark x1000

drivers/tty/serial/atmel_serial.c

@@ -37,6 +37,7 @@
 #include <linux/of_device.h>
 #include <linux/of_gpio.h>
 #include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/atmel_pdc.h>
 #include <linux/atmel_serial.h>
 #include <linux/uaccess.h>

drivers/tty/serial/sh-sci.c

@@ -1403,7 +1403,7 @@ static void work_fn_rx(struct work_struct *work)
 		unsigned long flags;
 		int count;
 
-		chan->device->device_control(chan, DMA_TERMINATE_ALL, 0);
+		dmaengine_terminate_all(chan);
 		dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
 			sh_desc->partial, sh_desc->cookie);
 

drivers/video/fbdev/mx3fb.c

@@ -461,8 +461,7 @@ static void sdc_disable_channel(struct mx3fb_info *mx3_fbi)
 
 	spin_unlock_irqrestore(&mx3fb->lock, flags);
 
-	mx3_fbi->txd->chan->device->device_control(mx3_fbi->txd->chan,
-						   DMA_TERMINATE_ALL, 0);
+	dmaengine_terminate_all(mx3_fbi->txd->chan);
 	mx3_fbi->txd = NULL;
 	mx3_fbi->cookie = -EINVAL;
 }

include/linux/dma/dw.h

+/*
+ * Driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ * Copyright (C) 2010-2011 ST Microelectronics
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _DMA_DW_H
+#define _DMA_DW_H
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+#include <linux/platform_data/dma-dw.h>
+
+struct dw_dma;
+
+/**
+ * struct dw_dma_chip - representation of DesignWare DMA controller hardware
+ * @dev:		struct device of the DMA controller
+ * @irq:		irq line
+ * @regs:		memory mapped I/O space
+ * @clk:		hclk clock
+ * @dw:			struct dw_dma that is filed by dw_dma_probe()
+ */
+struct dw_dma_chip {
+	struct device	*dev;
+	int		irq;
+	void __iomem	*regs;
+	struct clk	*clk;
+	struct dw_dma	*dw;
+};
+
+/* Export to the platform drivers */
+int dw_dma_probe(struct dw_dma_chip *chip, struct dw_dma_platform_data *pdata);
+int dw_dma_remove(struct dw_dma_chip *chip);
+
+/* DMA API extensions */
+struct dw_desc;
+
+struct dw_cyclic_desc {
+	struct dw_desc	**desc;
+	unsigned long	periods;
+	void		(*period_callback)(void *param);
+	void		*period_callback_param;
+};
+
+struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
+		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
+		enum dma_transfer_direction direction);
+void dw_dma_cyclic_free(struct dma_chan *chan);
+int dw_dma_cyclic_start(struct dma_chan *chan);
+void dw_dma_cyclic_stop(struct dma_chan *chan);
+
+dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
+
+dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
+
+#endif /* _DMA_DW_H */

include/linux/dmaengine.h

@@ -199,15 +199,12 @@ enum dma_ctrl_flags {
  * configuration data in statically from the platform). An additional
  * argument of struct dma_slave_config must be passed in with this
  * command.
- * @FSLDMA_EXTERNAL_START: this command will put the Freescale DMA controller
- * into external start mode.
  */
 enum dma_ctrl_cmd {
 	DMA_TERMINATE_ALL,
 	DMA_PAUSE,
 	DMA_RESUME,
 	DMA_SLAVE_CONFIG,
-	FSLDMA_EXTERNAL_START,
 };
 
 /**
@@ -307,7 +304,9 @@ enum dma_slave_buswidth {
  * struct dma_slave_config - dma slave channel runtime config
  * @direction: whether the data shall go in or out on this slave
  * channel, right now. DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are
- * legal values.
+ * legal values. DEPRECATED, drivers should use the direction argument
+ * to the device_prep_slave_sg and device_prep_dma_cyclic functions or
+ * the dir field in the dma_interleaved_template structure.
  * @src_addr: this is the physical address where DMA slave data
  * should be read (RX), if the source is memory this argument is
  * ignored.
@@ -755,6 +754,16 @@ static inline struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma(
 	return chan->device->device_prep_interleaved_dma(chan, xt, flags);
 }
 
+static inline struct dma_async_tx_descriptor *dmaengine_prep_dma_sg(
+		struct dma_chan *chan,
+		struct scatterlist *dst_sg, unsigned int dst_nents,
+		struct scatterlist *src_sg, unsigned int src_nents,
+		unsigned long flags)
+{
+	return chan->device->device_prep_dma_sg(chan, dst_sg, dst_nents,
+			src_sg, src_nents, flags);
+}
+
 static inline int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps)
 {
 	if (!chan || !caps)

include/linux/fsldma.h

+/*
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef FSL_DMA_H
+#define FSL_DMA_H
+/* fsl dma API for enxternal start */
+int fsl_dma_external_start(struct dma_chan *dchan, int enable);
+
+#endif

include/linux/dw_dmac.h → include/linux/platform_data/dma-dw.h

@@ -8,26 +8,24 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef DW_DMAC_H
-#define DW_DMAC_H
+#ifndef _PLATFORM_DATA_DMA_DW_H
+#define _PLATFORM_DATA_DMA_DW_H
 
-#include <linux/dmaengine.h>
+#include <linux/device.h>
 
 /**
  * struct dw_dma_slave - Controller-specific information about a slave
  *
  * @dma_dev: required DMA master device. Depricated.
- * @bus_id: name of this device channel, not just a device name since
- *          devices may have more than one channel e.g. "foo_tx"
- * @cfg_hi: Platform-specific initializer for the CFG_HI register
- * @cfg_lo: Platform-specific initializer for the CFG_LO register
+ * @src_id:	src request line
+ * @dst_id:	dst request line
  * @src_master: src master for transfers on allocated channel.
  * @dst_master: dest master for transfers on allocated channel.
  */
 struct dw_dma_slave {
 	struct device		*dma_dev;
-	u32			cfg_hi;
-	u32			cfg_lo;
+	u8			src_id;
+	u8			dst_id;
 	u8			src_master;
 	u8			dst_master;
 };
@@ -58,54 +56,4 @@ struct dw_dma_platform_data {
 	unsigned char	data_width[4];
 };
 
-/* bursts size */
-enum dw_dma_msize {
-	DW_DMA_MSIZE_1,
-	DW_DMA_MSIZE_4,
-	DW_DMA_MSIZE_8,
-	DW_DMA_MSIZE_16,
-	DW_DMA_MSIZE_32,
-	DW_DMA_MSIZE_64,
-	DW_DMA_MSIZE_128,
-	DW_DMA_MSIZE_256,
-};
-
-/* Platform-configurable bits in CFG_HI */
-#define DWC_CFGH_FCMODE		(1 << 0)
-#define DWC_CFGH_FIFO_MODE	(1 << 1)
-#define DWC_CFGH_PROTCTL(x)	((x) << 2)
-#define DWC_CFGH_SRC_PER(x)	((x) << 7)
-#define DWC_CFGH_DST_PER(x)	((x) << 11)
-
-/* Platform-configurable bits in CFG_LO */
-#define DWC_CFGL_LOCK_CH_XFER	(0 << 12)	/* scope of LOCK_CH */
-#define DWC_CFGL_LOCK_CH_BLOCK	(1 << 12)
-#define DWC_CFGL_LOCK_CH_XACT	(2 << 12)
-#define DWC_CFGL_LOCK_BUS_XFER	(0 << 14)	/* scope of LOCK_BUS */
-#define DWC_CFGL_LOCK_BUS_BLOCK	(1 << 14)
-#define DWC_CFGL_LOCK_BUS_XACT	(2 << 14)
-#define DWC_CFGL_LOCK_CH	(1 << 15)	/* channel lockout */
-#define DWC_CFGL_LOCK_BUS	(1 << 16)	/* busmaster lockout */
-#define DWC_CFGL_HS_DST_POL	(1 << 18)	/* dst handshake active low */
-#define DWC_CFGL_HS_SRC_POL	(1 << 19)	/* src handshake active low */
-
-/* DMA API extensions */
-struct dw_cyclic_desc {
-	struct dw_desc	**desc;
-	unsigned long	periods;
-	void		(*period_callback)(void *param);
-	void		*period_callback_param;
-};
-
-struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
-		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
-		enum dma_transfer_direction direction);
-void dw_dma_cyclic_free(struct dma_chan *chan);
-int dw_dma_cyclic_start(struct dma_chan *chan);
-void dw_dma_cyclic_stop(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
-
-dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
-
-#endif /* DW_DMAC_H */
+#endif /* _PLATFORM_DATA_DMA_DW_H */

include/linux/spi/pxa2xx_spi.h

@@ -23,6 +23,8 @@
 #define PXA2XX_CS_ASSERT (0x01)
 #define PXA2XX_CS_DEASSERT (0x02)
 
+struct dma_chan;
+
 /* device.platform_data for SSP controller devices */
 struct pxa2xx_spi_master {
 	u32 clock_enable;
@@ -30,10 +32,9 @@ struct pxa2xx_spi_master {
 	u8 enable_dma;
 
 	/* DMA engine specific config */
-	int rx_chan_id;
-	int tx_chan_id;
-	int rx_slave_id;
-	int tx_slave_id;
+	bool (*dma_filter)(struct dma_chan *chan, void *param);
+	void *tx_param;
+	void *rx_param;
 
 	/* For non-PXA arches */
 	struct ssp_device ssp;

include/sound/atmel-abdac.h

@@ -10,7 +10,7 @@
 #ifndef __INCLUDE_SOUND_ATMEL_ABDAC_H
 #define __INCLUDE_SOUND_ATMEL_ABDAC_H
 
-#include <linux/dw_dmac.h>
+#include <linux/platform_data/dma-dw.h>
 
 /**
  * struct atmel_abdac_pdata - board specific ABDAC configuration

include/sound/atmel-ac97c.h

@@ -10,7 +10,7 @@
 #ifndef __INCLUDE_SOUND_ATMEL_AC97C_H
 #define __INCLUDE_SOUND_ATMEL_AC97C_H
 
-#include <linux/dw_dmac.h>
+#include <linux/platform_data/dma-dw.h>
 
 #define AC97C_CAPTURE	0x01
 #define AC97C_PLAYBACK	0x02

sound/atmel/abdac.c

@@ -9,7 +9,6 @@
  */
 #include <linux/clk.h>
 #include <linux/bitmap.h>
-#include <linux/dw_dmac.h>
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
@@ -25,6 +24,9 @@
 #include <sound/pcm_params.h>
 #include <sound/atmel-abdac.h>
 
+#include <linux/platform_data/dma-dw.h>
+#include <linux/dma/dw.h>
+
 /* DAC register offsets */
 #define DAC_DATA                                0x0000
 #define DAC_CTRL                                0x0008

sound/atmel/ac97c.c

@@ -31,7 +31,8 @@
 #include <sound/atmel-ac97c.h>
 #include <sound/memalloc.h>
 
-#include <linux/dw_dmac.h>
+#include <linux/platform_data/dma-dw.h>
+#include <linux/dma/dw.h>
 
 #include <mach/cpu.h>
 

sound/soc/pxa/mmp-pcm.c

@@ -34,7 +34,8 @@ struct mmp_dma_data {
 		SNDRV_PCM_INFO_MMAP_VALID |	\
 		SNDRV_PCM_INFO_INTERLEAVED |	\
 		SNDRV_PCM_INFO_PAUSE |		\
-		SNDRV_PCM_INFO_RESUME)
+		SNDRV_PCM_INFO_RESUME |		\
+		SNDRV_PCM_INFO_NO_PERIOD_WAKEUP)
 
 static struct snd_pcm_hardware mmp_pcm_hardware[] = {
 	{