Commit 52e6e543 authored by Sonic Zhang's avatar Sonic Zhang Committed by Herbert Xu

crypto: bfin_crc - access crc registers by readl and writel functions

Move architecture independant crc header file out of the blackfin folder.
Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Reviewed-by: default avatarMarek Vasut <marex@denx.de>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 2d9cab51
......@@ -30,9 +30,11 @@
#include <crypto/internal/hash.h>
#include <asm/blackfin.h>
#include <asm/bfin_crc.h>
#include <asm/dma.h>
#include <asm/portmux.h>
#include <asm/io.h>
#include "bfin_crc.h"
#define CRC_CCRYPTO_QUEUE_LENGTH 5
......@@ -54,7 +56,7 @@ struct bfin_crypto_crc {
int irq;
int dma_ch;
u32 poly;
volatile struct crc_register *regs;
struct crc_register *regs;
struct ahash_request *req; /* current request in operation */
struct dma_desc_array *sg_cpu; /* virt addr of sg dma descriptors */
......@@ -132,13 +134,13 @@ static struct scatterlist *sg_get(struct scatterlist *sg_list, unsigned int nent
static int bfin_crypto_crc_init_hw(struct bfin_crypto_crc *crc, u32 key)
{
crc->regs->datacntrld = 0;
crc->regs->control = MODE_CALC_CRC << OPMODE_OFFSET;
crc->regs->curresult = key;
writel(0, &crc->regs->datacntrld);
writel(MODE_CALC_CRC << OPMODE_OFFSET, &crc->regs->control);
writel(key, &crc->regs->curresult);
/* setup CRC interrupts */
crc->regs->status = CMPERRI | DCNTEXPI;
crc->regs->intrenset = CMPERRI | DCNTEXPI;
writel(CMPERRI | DCNTEXPI, &crc->regs->status);
writel(CMPERRI | DCNTEXPI, &crc->regs->intrenset);
return 0;
}
......@@ -303,6 +305,7 @@ static int bfin_crypto_crc_handle_queue(struct bfin_crypto_crc *crc,
int nsg, i, j;
unsigned int nextlen;
unsigned long flags;
u32 reg;
spin_lock_irqsave(&crc->lock, flags);
if (req)
......@@ -402,13 +405,14 @@ static int bfin_crypto_crc_handle_queue(struct bfin_crypto_crc *crc,
ctx->sg_buflen += CHKSUM_DIGEST_SIZE;
/* set CRC data count before start DMA */
crc->regs->datacnt = ctx->sg_buflen >> 2;
writel(ctx->sg_buflen >> 2, &crc->regs->datacnt);
/* setup and enable CRC DMA */
bfin_crypto_crc_config_dma(crc);
/* finally kick off CRC operation */
crc->regs->control |= BLKEN;
reg = readl(&crc->regs->control);
writel(reg | BLKEN, &crc->regs->control);
return -EINPROGRESS;
}
......@@ -529,14 +533,17 @@ static void bfin_crypto_crc_done_task(unsigned long data)
static irqreturn_t bfin_crypto_crc_handler(int irq, void *dev_id)
{
struct bfin_crypto_crc *crc = dev_id;
u32 reg;
if (crc->regs->status & DCNTEXP) {
crc->regs->status = DCNTEXP;
if (readl(&crc->regs->status) & DCNTEXP) {
writel(DCNTEXP, &crc->regs->status);
/* prepare results */
put_unaligned_le32(crc->regs->result, crc->req->result);
put_unaligned_le32(readl(&crc->regs->result),
crc->req->result);
crc->regs->control &= ~BLKEN;
reg = readl(&crc->regs->control);
writel(reg & ~BLKEN, &crc->regs->control);
crc->busy = 0;
if (crc->req->base.complete)
......@@ -560,7 +567,7 @@ static int bfin_crypto_crc_suspend(struct platform_device *pdev, pm_message_t st
struct bfin_crypto_crc *crc = platform_get_drvdata(pdev);
int i = 100000;
while ((crc->regs->control & BLKEN) && --i)
while ((readl(&crc->regs->control) & BLKEN) && --i)
cpu_relax();
if (i == 0)
......@@ -648,10 +655,11 @@ static int bfin_crypto_crc_probe(struct platform_device *pdev)
*/
crc->sg_mid_buf = (u8 *)(crc->sg_cpu + ((CRC_MAX_DMA_DESC + 1) << 1));
crc->regs->control = 0;
crc->regs->poly = crc->poly = (u32)pdev->dev.platform_data;
writel(0, &crc->regs->control);
crc->poly = (u32)pdev->dev.platform_data;
writel(crc->poly, &crc->regs->poly);
while (!(crc->regs->status & LUTDONE) && (--timeout) > 0)
while (!(readl(&crc->regs->status) & LUTDONE) && (--timeout) > 0)
cpu_relax();
if (timeout == 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment