[PATCH] C99 designated initializers for drivers/usb

Hi.

Here's a set of three patches for switching  ...

drivers/usb/serial/io_ti.c
drivers/usb/net/usbnet.c
drivers/usb/core/hub.c

... to use C99 named initializers. The patches are all against 2.5.42.

drivers/usb/core/hub.c

@@ -1069,10 +1069,10 @@ static int usb_hub_thread(void *__hub)
 }
 
 static struct usb_device_id hub_id_table [] = {
-    { match_flags: USB_DEVICE_ID_MATCH_DEV_CLASS,
-      bDeviceClass: USB_CLASS_HUB},
-    { match_flags: USB_DEVICE_ID_MATCH_INT_CLASS,
-      bInterfaceClass: USB_CLASS_HUB},
+    { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
+      .bDeviceClass = USB_CLASS_HUB},
+    { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
+      .bInterfaceClass = USB_CLASS_HUB},
     { }						/* Terminating entry */
 };
 

drivers/usb/net/usbnet.c

@@ -2092,7 +2092,7 @@ static const struct usb_device_id	products [] = {
 #ifdef	CONFIG_USB_EPSON2888
 {
 	USB_DEVICE (0x0525, 0x2888),	// EPSON USB client
-	driver_info:	(unsigned long) &epson2888_info,
+	.driver_info	= (unsigned long) &epson2888_info,
 },
 #endif
 

drivers/usb/serial/io_ti.c

@@ -2617,47 +2617,47 @@ static void edge_shutdown (struct usb_serial *serial)
 
 
 static struct usb_serial_device_type edgeport_1port_device = {
-	owner:			THIS_MODULE,
-	name:			"Edgeport TI 1 port adapter",
-	id_table:		edgeport_1port_id_table,
-	num_interrupt_in:	1,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			edge_open,
-	close:			edge_close,
-	throttle:		edge_throttle,
-	unthrottle:		edge_unthrottle,
-	attach:			edge_startup,
-	shutdown:		edge_shutdown,
-	ioctl:			edge_ioctl,
-	set_termios:		edge_set_termios,
-	write:			edge_write,
-	write_room:		edge_write_room,
-	chars_in_buffer:	edge_chars_in_buffer,
-	break_ctl:		edge_break,
+	.owner			= THIS_MODULE,
+	.name			= "Edgeport TI 1 port adapter",
+	.id_table		= edgeport_1port_id_table,
+	.num_interrupt_in	= 1,
+	.num_bulk_in		= 1,
+	.num_bulk_out		= 1,
+	.num_ports		= 1,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.shutdown		= edge_shutdown,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
 };
 
 static struct usb_serial_device_type edgeport_2port_device = {
-	owner:			THIS_MODULE,
-	name:			"Edgeport TI 2 port adapter",
-	id_table:		edgeport_2port_id_table,
-	num_interrupt_in:	1,
-	num_bulk_in:		2,
-	num_bulk_out:		2,
-	num_ports:		2,
-	open:			edge_open,
-	close:			edge_close,
-	throttle:		edge_throttle,
-	unthrottle:		edge_unthrottle,
-	attach:			edge_startup,
-	shutdown:		edge_shutdown,
-	ioctl:			edge_ioctl,
-	set_termios:		edge_set_termios,
-	write:			edge_write,
-	write_room:		edge_write_room,
-	chars_in_buffer:	edge_chars_in_buffer,
-	break_ctl:		edge_break,
+	.owner			= THIS_MODULE,
+	.name			= "Edgeport TI 2 port adapter",
+	.id_table		= edgeport_2port_id_table,
+	.num_interrupt_in	= 1,
+	.num_bulk_in		= 2,
+	.num_bulk_out		= 2,
+	.num_ports		= 2,
+	.open			= edge_open,
+	.close			= edge_close,
+	.throttle		= edge_throttle,
+	.unthrottle		= edge_unthrottle,
+	.attach			= edge_startup,
+	.shutdown		= edge_shutdown,
+	.ioctl			= edge_ioctl,
+	.set_termios		= edge_set_termios,
+	.write			= edge_write,
+	.write_room		= edge_write_room,
+	.chars_in_buffer	= edge_chars_in_buffer,
+	.break_ctl		= edge_break,
 };