Commit 53821162 authored by viresh kumar's avatar viresh kumar Committed by Russell King

ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros

Resource size required mostly is 4K for all devices, whereas currently
reserved space is much beyond that. This patch replaces SIZE macro's used at
multiple places with SZ_4K.
Reviewed-by: default avatarStanley Miao <stanley.miao@windriver.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
Signed-off-by: default avatarShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: default avatarRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent c2c07831
......@@ -437,7 +437,7 @@ struct amba_device gpio1_device = {
},
.res = {
.start = SPEAR300_GPIO_BASE,
.end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {VIRQ_GPIO1, NO_IRQ},
......@@ -452,8 +452,7 @@ void __init spear300_init(void)
spear3xx_init();
/* shared irq registration */
shirq_ras1.regs.base =
ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
......@@ -461,8 +460,7 @@ void __init spear300_init(void)
}
/* pmx initialization */
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE,
SPEAR300_SOC_CONFIG_SIZE);
pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
if (pmx_driver.base) {
ret = pmx_register(&pmx_driver);
if (ret)
......
......@@ -267,7 +267,7 @@ void __init spear310_init(void)
spear3xx_init();
/* shared irq registration */
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
......
......@@ -520,7 +520,7 @@ void __init spear320_init(void)
spear3xx_init();
/* shared irq registration */
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
......
......@@ -35,7 +35,7 @@ struct amba_device gpio_device = {
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
.end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
......@@ -48,7 +48,7 @@ struct amba_device uart_device = {
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
.end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
......@@ -71,22 +71,22 @@ struct map_desc spear3xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
.length = SPEAR3XX_ICM1_UART_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
.length = SPEAR3XX_ML1_VIC_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
.length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
.length = SPEAR3XX_ICM3_MISC_REG_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
},
};
......
......@@ -31,8 +31,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
.end = SPEAR6XX_ICM1_UART0_BASE +
SPEAR6XX_ICM1_UART0_SIZE - 1,
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
......@@ -42,8 +41,7 @@ struct amba_device uart_device[] = {
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
.end = SPEAR6XX_ICM1_UART1_BASE +
SPEAR6XX_ICM1_UART1_SIZE - 1,
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
......@@ -72,8 +70,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
.end = SPEAR6XX_CPU_GPIO_BASE +
SPEAR6XX_CPU_GPIO_SIZE - 1,
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
......@@ -84,8 +81,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
.end = SPEAR6XX_ICM3_GPIO_BASE +
SPEAR6XX_ICM3_GPIO_SIZE - 1,
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
......@@ -96,8 +92,7 @@ struct amba_device gpio_device[] = {
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
.end = SPEAR6XX_ICM2_GPIO_BASE +
SPEAR6XX_ICM2_GPIO_SIZE - 1,
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
......@@ -122,27 +117,27 @@ static struct map_desc spear6xx_io_desc[] __initdata = {
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
.length = SPEAR6XX_ICM1_UART0_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
.length = SPEAR6XX_CPU_VIC_PRI_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
.length = SPEAR6XX_CPU_VIC_SEC_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
.length = SPEAR6XX_ICM3_MISC_REG_BASE,
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
.length = SPEAR6XX_ICM3_MISC_REG_SIZE,
.length = SZ_4K,
.type = MT_DEVICE
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment