Commit 5391473f authored by Lennert Buytenhek's avatar Lennert Buytenhek Committed by Russell King

[ARM] 3121/1: unconditionally use XCB=101 on ixp2000

Patch from Lennert Buytenhek

Since we have to use XCB=101 instead of XCB=000 on the ixp2400 to
prevent it from regularly falling over, and since we have to deal with
manual write buffer flushing because of that, we might as well use
XCB=101 on all ixp2000 platforms since it's faster than XCB=000.
Signed-off-by: default avatarLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent bedf142b
......@@ -84,63 +84,54 @@ static struct map_desc ixp2000_io_desc[] __initdata = {
.virtual = IXP2000_CAP_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
.pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
.type = MT_DEVICE
.type = MT_IXP2000_DEVICE,
}
};
void __init ixp2000_map_io(void)
{
extern unsigned int processor_id;
/*
* On IXP2400 CPUs we need to use MT_IXP2000_DEVICE for
* tweaking the PMDs so XCB=101. On IXP2800s we use the normal
* PMD flags.
* On IXP2400 CPUs we need to use MT_IXP2000_DEVICE so that
* XCB=101 (to avoid triggering erratum #66), and given that
* this mode speeds up I/O accesses and we have write buffer
* flushes in the right places anyway, it doesn't hurt to use
* XCB=101 for all IXP2000s.
*/
if ((processor_id & 0xfffffff0) == 0x69054190) {
int i;
printk(KERN_INFO "Enabling IXP2400 erratum #66 workaround\n");
for(i=0;i<ARRAY_SIZE(ixp2000_io_desc);i++)
ixp2000_io_desc[i].type = MT_IXP2000_DEVICE;
}
iotable_init(ixp2000_io_desc, ARRAY_SIZE(ixp2000_io_desc));
/* Set slowport to 8-bit mode. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment